# WARNING ABOUT GENERATED CODE # # This file is generated. See the contributing guide for more information: # https://github.com/aws/aws-sdk-ruby/blob/master/CONTRIBUTING.md # # WARNING ABOUT GENERATED CODE module Aws::DatabaseMigrationService module Types # AWS DMS was denied access to the endpoint. Check that the role is # correctly configured. # # @!attribute [rw] message # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/AccessDeniedFault AWS API Documentation # class AccessDeniedFault < Struct.new( :message) include Aws::Structure end # Describes a quota for an AWS account, for example, the number of # replication instances allowed. # # @!attribute [rw] account_quota_name # The name of the AWS DMS quota for this AWS account. # @return [String] # # @!attribute [rw] used # The amount currently used toward the quota maximum. # @return [Integer] # # @!attribute [rw] max # The maximum allowed value for the quota. # @return [Integer] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/AccountQuota AWS API Documentation # class AccountQuota < Struct.new( :account_quota_name, :used, :max) include Aws::Structure end # Associates a set of tags with an AWS DMS resource. # # @note When making an API call, you may pass AddTagsToResourceMessage # data as a hash: # # { # resource_arn: "String", # required # tags: [ # required # { # key: "String", # value: "String", # }, # ], # } # # @!attribute [rw] resource_arn # Identifies the AWS DMS resource to which tags should be added. The # value for this parameter is an Amazon Resource Name (ARN). # # For AWS DMS, you can tag a replication instance, an endpoint, or a # replication task. # @return [String] # # @!attribute [rw] tags # One or more tags to be assigned to the resource. # @return [Array] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/AddTagsToResourceMessage AWS API Documentation # class AddTagsToResourceMessage < Struct.new( :resource_arn, :tags) include Aws::Structure end # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/AddTagsToResourceResponse AWS API Documentation # class AddTagsToResourceResponse < Aws::EmptyStructure; end # @note When making an API call, you may pass ApplyPendingMaintenanceActionMessage # data as a hash: # # { # replication_instance_arn: "String", # required # apply_action: "String", # required # opt_in_type: "String", # required # } # # @!attribute [rw] replication_instance_arn # The Amazon Resource Name (ARN) of the AWS DMS resource that the # pending maintenance action applies to. # @return [String] # # @!attribute [rw] apply_action # The pending maintenance action to apply to this resource. # @return [String] # # @!attribute [rw] opt_in_type # A value that specifies the type of opt-in request, or undoes an # opt-in request. You can't undo an opt-in request of type # `immediate`. # # Valid values: # # * `immediate` - Apply the maintenance action immediately. # # * `next-maintenance` - Apply the maintenance action during the next # maintenance window for the resource. # # * `undo-opt-in` - Cancel any existing `next-maintenance` opt-in # requests. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/ApplyPendingMaintenanceActionMessage AWS API Documentation # class ApplyPendingMaintenanceActionMessage < Struct.new( :replication_instance_arn, :apply_action, :opt_in_type) include Aws::Structure end # @!attribute [rw] resource_pending_maintenance_actions # The AWS DMS resource that the pending maintenance action will be # applied to. # @return [Types::ResourcePendingMaintenanceActions] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/ApplyPendingMaintenanceActionResponse AWS API Documentation # class ApplyPendingMaintenanceActionResponse < Struct.new( :resource_pending_maintenance_actions) include Aws::Structure end # @!attribute [rw] name # The name of the availability zone. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/AvailabilityZone AWS API Documentation # class AvailabilityZone < Struct.new( :name) include Aws::Structure end # The SSL certificate that can be used to encrypt connections between # the endpoints and the replication instance. # # @!attribute [rw] certificate_identifier # A customer-assigned name for the certificate. Identifiers must begin # with a letter; must contain only ASCII letters, digits, and hyphens; # and must not end with a hyphen or contain two consecutive hyphens. # @return [String] # # @!attribute [rw] certificate_creation_date # The date that the certificate was created. # @return [Time] # # @!attribute [rw] certificate_pem # The contents of a `.pem` file, which contains an X.509 certificate. # @return [String] # # @!attribute [rw] certificate_wallet # The location of an imported Oracle Wallet certificate for use with # SSL. # @return [String] # # @!attribute [rw] certificate_arn # The Amazon Resource Name (ARN) for the certificate. # @return [String] # # @!attribute [rw] certificate_owner # The owner of the certificate. # @return [String] # # @!attribute [rw] valid_from_date # The beginning date that the certificate is valid. # @return [Time] # # @!attribute [rw] valid_to_date # The final date that the certificate is valid. # @return [Time] # # @!attribute [rw] signing_algorithm # The signing algorithm for the certificate. # @return [String] # # @!attribute [rw] key_length # The key length of the cryptographic algorithm being used. # @return [Integer] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/Certificate AWS API Documentation # class Certificate < Struct.new( :certificate_identifier, :certificate_creation_date, :certificate_pem, :certificate_wallet, :certificate_arn, :certificate_owner, :valid_from_date, :valid_to_date, :signing_algorithm, :key_length) include Aws::Structure end # @!attribute [rw] replication_instance_arn # The Amazon Resource Name (ARN) of the replication instance. # @return [String] # # @!attribute [rw] endpoint_arn # The Amazon Resource Name (ARN) string that uniquely identifies the # endpoint. # @return [String] # # @!attribute [rw] status # The connection status. # @return [String] # # @!attribute [rw] last_failure_message # The error message when the connection last failed. # @return [String] # # @!attribute [rw] endpoint_identifier # The identifier of the endpoint. Identifiers must begin with a # letter; must contain only ASCII letters, digits, and hyphens; and # must not end with a hyphen or contain two consecutive hyphens. # @return [String] # # @!attribute [rw] replication_instance_identifier # The replication instance identifier. This parameter is stored as a # lowercase string. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/Connection AWS API Documentation # class Connection < Struct.new( :replication_instance_arn, :endpoint_arn, :status, :last_failure_message, :endpoint_identifier, :replication_instance_identifier) include Aws::Structure end # @note When making an API call, you may pass CreateEndpointMessage # data as a hash: # # { # endpoint_identifier: "String", # required # endpoint_type: "source", # required, accepts source, target # engine_name: "String", # required # username: "String", # password: "SecretString", # server_name: "String", # port: 1, # database_name: "String", # extra_connection_attributes: "String", # kms_key_id: "String", # tags: [ # { # key: "String", # value: "String", # }, # ], # certificate_arn: "String", # ssl_mode: "none", # accepts none, require, verify-ca, verify-full # service_access_role_arn: "String", # external_table_definition: "String", # dynamo_db_settings: { # service_access_role_arn: "String", # required # }, # s3_settings: { # service_access_role_arn: "String", # external_table_definition: "String", # csv_row_delimiter: "String", # csv_delimiter: "String", # bucket_folder: "String", # bucket_name: "String", # compression_type: "none", # accepts none, gzip # encryption_mode: "sse-s3", # accepts sse-s3, sse-kms # server_side_encryption_kms_key_id: "String", # data_format: "csv", # accepts csv, parquet # encoding_type: "plain", # accepts plain, plain-dictionary, rle-dictionary # dict_page_size_limit: 1, # row_group_length: 1, # data_page_size: 1, # parquet_version: "parquet-1-0", # accepts parquet-1-0, parquet-2-0 # enable_statistics: false, # include_op_for_full_load: false, # cdc_inserts_only: false, # timestamp_column_name: "String", # }, # dms_transfer_settings: { # service_access_role_arn: "String", # bucket_name: "String", # }, # mongo_db_settings: { # username: "String", # password: "SecretString", # server_name: "String", # port: 1, # database_name: "String", # auth_type: "no", # accepts no, password # auth_mechanism: "default", # accepts default, mongodb_cr, scram_sha_1 # nesting_level: "none", # accepts none, one # extract_doc_id: "String", # docs_to_investigate: "String", # auth_source: "String", # kms_key_id: "String", # }, # kinesis_settings: { # stream_arn: "String", # message_format: "json", # accepts json # service_access_role_arn: "String", # }, # elasticsearch_settings: { # service_access_role_arn: "String", # required # endpoint_uri: "String", # required # full_load_error_percentage: 1, # error_retry_duration: 1, # }, # redshift_settings: { # accept_any_date: false, # after_connect_script: "String", # bucket_folder: "String", # bucket_name: "String", # connection_timeout: 1, # database_name: "String", # date_format: "String", # empty_as_null: false, # encryption_mode: "sse-s3", # accepts sse-s3, sse-kms # file_transfer_upload_streams: 1, # load_timeout: 1, # max_file_size: 1, # password: "SecretString", # port: 1, # remove_quotes: false, # replace_invalid_chars: "String", # replace_chars: "String", # server_name: "String", # service_access_role_arn: "String", # server_side_encryption_kms_key_id: "String", # time_format: "String", # trim_blanks: false, # truncate_columns: false, # username: "String", # write_buffer_size: 1, # }, # } # # @!attribute [rw] endpoint_identifier # The database endpoint identifier. Identifiers must begin with a # letter; must contain only ASCII letters, digits, and hyphens; and # must not end with a hyphen or contain two consecutive hyphens. # @return [String] # # @!attribute [rw] endpoint_type # The type of endpoint. Valid values are `source` and `target`. # @return [String] # # @!attribute [rw] engine_name # The type of engine for the endpoint. Valid values, depending on the # `EndpointType` value, include `mysql`, `oracle`, `postgres`, # `mariadb`, `aurora`, `aurora-postgresql`, `redshift`, `s3`, `db2`, # `azuredb`, `sybase`, `dynamodb`, `mongodb`, and `sqlserver`. # @return [String] # # @!attribute [rw] username # The user name to be used to log in to the endpoint database. # @return [String] # # @!attribute [rw] password # The password to be used to log in to the endpoint database. # @return [String] # # @!attribute [rw] server_name # The name of the server where the endpoint database resides. # @return [String] # # @!attribute [rw] port # The port used by the endpoint database. # @return [Integer] # # @!attribute [rw] database_name # The name of the endpoint database. # @return [String] # # @!attribute [rw] extra_connection_attributes # Additional attributes associated with the connection. Each attribute # is specified as a name-value pair associated by an equal sign (=). # Multiple attributes are separated by a semicolon (;) with no # additional white space. For information on the attributes available # for connecting your source or target endpoint, see [Working with AWS # DMS Endpoints][1] in the *AWS Database Migration Service User # Guide.* # # # # [1]: https://docs.aws.amazon.com/dms/latest/userguide/CHAP_Endpoints.html # @return [String] # # @!attribute [rw] kms_key_id # An AWS KMS key identifier that is used to encrypt the connection # parameters for the endpoint. # # If you don't specify a value for the `KmsKeyId` parameter, then AWS # DMS uses your default encryption key. # # AWS KMS creates the default encryption key for your AWS account. # Your AWS account has a different default encryption key for each AWS # Region. # @return [String] # # @!attribute [rw] tags # One or more tags to be assigned to the endpoint. # @return [Array] # # @!attribute [rw] certificate_arn # The Amazon Resource Name (ARN) for the certificate. # @return [String] # # @!attribute [rw] ssl_mode # The Secure Sockets Layer (SSL) mode to use for the SSL connection. # The default is `none` # @return [String] # # @!attribute [rw] service_access_role_arn # The Amazon Resource Name (ARN) for the service access role that you # want to use to create the endpoint. # @return [String] # # @!attribute [rw] external_table_definition # The external table definition. # @return [String] # # @!attribute [rw] dynamo_db_settings # Settings in JSON format for the target Amazon DynamoDB endpoint. For # more information about the available settings, see [Using Object # Mapping to Migrate Data to DynamoDB][1] in the *AWS Database # Migration Service User Guide.* # # # # [1]: https://docs.aws.amazon.com/dms/latest/userguide/CHAP_Target.DynamoDB.html # @return [Types::DynamoDbSettings] # # @!attribute [rw] s3_settings # Settings in JSON format for the target Amazon S3 endpoint. For more # information about the available settings, see [Extra Connection # Attributes When Using Amazon S3 as a Target for AWS DMS][1] in the # *AWS Database Migration Service User Guide.* # # # # [1]: https://docs.aws.amazon.com/dms/latest/userguide/CHAP_Target.S3.html#CHAP_Target.S3.Configuring # @return [Types::S3Settings] # # @!attribute [rw] dms_transfer_settings # The settings in JSON format for the DMS transfer type of source # endpoint. # # Possible attributes include the following: # # * `serviceAccessRoleArn` - The IAM role that has permission to # access the Amazon S3 bucket. # # * `bucketName` - The name of the S3 bucket to use. # # * `compressionType` - An optional parameter to use GZIP to compress # the target files. To use GZIP, set this value to `NONE` (the # default). To keep the files uncompressed, don't use this value. # # Shorthand syntax for these attributes is as follows: # `ServiceAccessRoleArn=string,BucketName=string,CompressionType=string` # # JSON syntax for these attributes is as follows: `\{ # "ServiceAccessRoleArn": "string", "BucketName": "string", # "CompressionType": "none"|"gzip" \} ` # @return [Types::DmsTransferSettings] # # @!attribute [rw] mongo_db_settings # Settings in JSON format for the source MongoDB endpoint. For more # information about the available settings, see the configuration # properties section in [ Using MongoDB as a Target for AWS Database # Migration Service][1] in the *AWS Database Migration Service User # Guide.* # # # # [1]: https://docs.aws.amazon.com/dms/latest/userguide/CHAP_Source.MongoDB.html # @return [Types::MongoDbSettings] # # @!attribute [rw] kinesis_settings # Settings in JSON format for the target Amazon Kinesis Data Streams # endpoint. For more information about the available settings, see # [Using Object Mapping to Migrate Data to a Kinesis Data Stream][1] # in the *AWS Database Migration User Guide.* # # # # [1]: https://docs.aws.amazon.com/dms/latest/userguide/CHAP_Target.Kinesis.html#CHAP_Target.Kinesis.ObjectMapping # @return [Types::KinesisSettings] # # @!attribute [rw] elasticsearch_settings # Settings in JSON format for the target Elasticsearch endpoint. For # more information about the available settings, see [Extra Connection # Attributes When Using Elasticsearch as a Target for AWS DMS][1] in # the *AWS Database Migration User Guide.* # # # # [1]: https://docs.aws.amazon.com/dms/latest/userguide/CHAP_Target.Elasticsearch.html#CHAP_Target.Elasticsearch.Configuration # @return [Types::ElasticsearchSettings] # # @!attribute [rw] redshift_settings # @return [Types::RedshiftSettings] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/CreateEndpointMessage AWS API Documentation # class CreateEndpointMessage < Struct.new( :endpoint_identifier, :endpoint_type, :engine_name, :username, :password, :server_name, :port, :database_name, :extra_connection_attributes, :kms_key_id, :tags, :certificate_arn, :ssl_mode, :service_access_role_arn, :external_table_definition, :dynamo_db_settings, :s3_settings, :dms_transfer_settings, :mongo_db_settings, :kinesis_settings, :elasticsearch_settings, :redshift_settings) include Aws::Structure end # @!attribute [rw] endpoint # The endpoint that was created. # @return [Types::Endpoint] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/CreateEndpointResponse AWS API Documentation # class CreateEndpointResponse < Struct.new( :endpoint) include Aws::Structure end # @note When making an API call, you may pass CreateEventSubscriptionMessage # data as a hash: # # { # subscription_name: "String", # required # sns_topic_arn: "String", # required # source_type: "String", # event_categories: ["String"], # source_ids: ["String"], # enabled: false, # tags: [ # { # key: "String", # value: "String", # }, # ], # } # # @!attribute [rw] subscription_name # The name of the AWS DMS event notification subscription. This name # must be less than 255 characters. # @return [String] # # @!attribute [rw] sns_topic_arn # The Amazon Resource Name (ARN) of the Amazon SNS topic created for # event notification. The ARN is created by Amazon SNS when you create # a topic and subscribe to it. # @return [String] # # @!attribute [rw] source_type # The type of AWS DMS resource that generates the events. For example, # if you want to be notified of events generated by a replication # instance, you set this parameter to `replication-instance`. If this # value is not specified, all events are returned. # # Valid values: `replication-instance` \| `replication-task` # @return [String] # # @!attribute [rw] event_categories # A list of event categories for a source type that you want to # subscribe to. For more information, see [Working with Events and # Notifications][1] in the *AWS Database Migration Service User # Guide.* # # # # [1]: https://docs.aws.amazon.com/dms/latest/userguide/CHAP_Events.html # @return [Array] # # @!attribute [rw] source_ids # A list of identifiers for which AWS DMS provides notification # events. # # If you don't specify a value, notifications are provided for all # sources. # # If you specify multiple values, they must be of the same type. For # example, if you specify a database instance ID, then all of the # other values must be database instance IDs. # @return [Array] # # @!attribute [rw] enabled # A Boolean value; set to `true` to activate the subscription, or set # to `false` to create the subscription but not activate it. # @return [Boolean] # # @!attribute [rw] tags # One or more tags to be assigned to the event subscription. # @return [Array] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/CreateEventSubscriptionMessage AWS API Documentation # class CreateEventSubscriptionMessage < Struct.new( :subscription_name, :sns_topic_arn, :source_type, :event_categories, :source_ids, :enabled, :tags) include Aws::Structure end # @!attribute [rw] event_subscription # The event subscription that was created. # @return [Types::EventSubscription] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/CreateEventSubscriptionResponse AWS API Documentation # class CreateEventSubscriptionResponse < Struct.new( :event_subscription) include Aws::Structure end # @note When making an API call, you may pass CreateReplicationInstanceMessage # data as a hash: # # { # replication_instance_identifier: "String", # required # allocated_storage: 1, # replication_instance_class: "String", # required # vpc_security_group_ids: ["String"], # availability_zone: "String", # replication_subnet_group_identifier: "String", # preferred_maintenance_window: "String", # multi_az: false, # engine_version: "String", # auto_minor_version_upgrade: false, # tags: [ # { # key: "String", # value: "String", # }, # ], # kms_key_id: "String", # publicly_accessible: false, # dns_name_servers: "String", # } # # @!attribute [rw] replication_instance_identifier # The replication instance identifier. This parameter is stored as a # lowercase string. # # Constraints: # # * Must contain from 1 to 63 alphanumeric characters or hyphens. # # * First character must be a letter. # # * Cannot end with a hyphen or contain two consecutive hyphens. # # Example: `myrepinstance` # @return [String] # # @!attribute [rw] allocated_storage # The amount of storage (in gigabytes) to be initially allocated for # the replication instance. # @return [Integer] # # @!attribute [rw] replication_instance_class # The compute and memory capacity of the replication instance as # specified by the replication instance class. # # Valid Values: `dms.t2.micro | dms.t2.small | dms.t2.medium | # dms.t2.large | dms.c4.large | dms.c4.xlarge | dms.c4.2xlarge | # dms.c4.4xlarge ` # @return [String] # # @!attribute [rw] vpc_security_group_ids # Specifies the VPC security group to be used with the replication # instance. The VPC security group must work with the VPC containing # the replication instance. # @return [Array] # # @!attribute [rw] availability_zone # The AWS Availability Zone where the replication instance will be # created. The default value is a random, system-chosen Availability # Zone in the endpoint's AWS Region, for example: `us-east-1d` # @return [String] # # @!attribute [rw] replication_subnet_group_identifier # A subnet group to associate with the replication instance. # @return [String] # # @!attribute [rw] preferred_maintenance_window # The weekly time range during which system maintenance can occur, in # Universal Coordinated Time (UTC). # # Format: `ddd:hh24:mi-ddd:hh24:mi` # # Default: A 30-minute window selected at random from an 8-hour block # of time per AWS Region, occurring on a random day of the week. # # Valid Days: Mon, Tue, Wed, Thu, Fri, Sat, Sun # # Constraints: Minimum 30-minute window. # @return [String] # # @!attribute [rw] multi_az # Specifies whether the replication instance is a Multi-AZ deployment. # You cannot set the `AvailabilityZone` parameter if the Multi-AZ # parameter is set to `true`. # @return [Boolean] # # @!attribute [rw] engine_version # The engine version number of the replication instance. # @return [String] # # @!attribute [rw] auto_minor_version_upgrade # Indicates whether minor engine upgrades will be applied # automatically to the replication instance during the maintenance # window. This parameter defaults to `true`. # # Default: `true` # @return [Boolean] # # @!attribute [rw] tags # One or more tags to be assigned to the replication instance. # @return [Array] # # @!attribute [rw] kms_key_id # An AWS KMS key identifier that is used to encrypt the data on the # replication instance. # # If you don't specify a value for the `KmsKeyId` parameter, then AWS # DMS uses your default encryption key. # # AWS KMS creates the default encryption key for your AWS account. # Your AWS account has a different default encryption key for each AWS # Region. # @return [String] # # @!attribute [rw] publicly_accessible # Specifies the accessibility options for the replication instance. A # value of `true` represents an instance with a public IP address. A # value of `false` represents an instance with a private IP address. # The default value is `true`. # @return [Boolean] # # @!attribute [rw] dns_name_servers # A list of DNS name servers supported for the replication instance. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/CreateReplicationInstanceMessage AWS API Documentation # class CreateReplicationInstanceMessage < Struct.new( :replication_instance_identifier, :allocated_storage, :replication_instance_class, :vpc_security_group_ids, :availability_zone, :replication_subnet_group_identifier, :preferred_maintenance_window, :multi_az, :engine_version, :auto_minor_version_upgrade, :tags, :kms_key_id, :publicly_accessible, :dns_name_servers) include Aws::Structure end # @!attribute [rw] replication_instance # The replication instance that was created. # @return [Types::ReplicationInstance] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/CreateReplicationInstanceResponse AWS API Documentation # class CreateReplicationInstanceResponse < Struct.new( :replication_instance) include Aws::Structure end # @note When making an API call, you may pass CreateReplicationSubnetGroupMessage # data as a hash: # # { # replication_subnet_group_identifier: "String", # required # replication_subnet_group_description: "String", # required # subnet_ids: ["String"], # required # tags: [ # { # key: "String", # value: "String", # }, # ], # } # # @!attribute [rw] replication_subnet_group_identifier # The name for the replication subnet group. This value is stored as a # lowercase string. # # Constraints: Must contain no more than 255 alphanumeric characters, # periods, spaces, underscores, or hyphens. Must not be "default". # # Example: `mySubnetgroup` # @return [String] # # @!attribute [rw] replication_subnet_group_description # The description for the subnet group. # @return [String] # # @!attribute [rw] subnet_ids # One or more subnet IDs to be assigned to the subnet group. # @return [Array] # # @!attribute [rw] tags # One or more tags to be assigned to the subnet group. # @return [Array] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/CreateReplicationSubnetGroupMessage AWS API Documentation # class CreateReplicationSubnetGroupMessage < Struct.new( :replication_subnet_group_identifier, :replication_subnet_group_description, :subnet_ids, :tags) include Aws::Structure end # @!attribute [rw] replication_subnet_group # The replication subnet group that was created. # @return [Types::ReplicationSubnetGroup] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/CreateReplicationSubnetGroupResponse AWS API Documentation # class CreateReplicationSubnetGroupResponse < Struct.new( :replication_subnet_group) include Aws::Structure end # @note When making an API call, you may pass CreateReplicationTaskMessage # data as a hash: # # { # replication_task_identifier: "String", # required # source_endpoint_arn: "String", # required # target_endpoint_arn: "String", # required # replication_instance_arn: "String", # required # migration_type: "full-load", # required, accepts full-load, cdc, full-load-and-cdc # table_mappings: "String", # required # replication_task_settings: "String", # cdc_start_time: Time.now, # cdc_start_position: "String", # cdc_stop_position: "String", # tags: [ # { # key: "String", # value: "String", # }, # ], # } # # @!attribute [rw] replication_task_identifier # An identifier for the replication task. # # Constraints: # # * Must contain from 1 to 255 alphanumeric characters or hyphens. # # * First character must be a letter. # # * Cannot end with a hyphen or contain two consecutive hyphens. # @return [String] # # @!attribute [rw] source_endpoint_arn # An Amazon Resource Name (ARN) that uniquely identifies the source # endpoint. # @return [String] # # @!attribute [rw] target_endpoint_arn # An Amazon Resource Name (ARN) that uniquely identifies the target # endpoint. # @return [String] # # @!attribute [rw] replication_instance_arn # The Amazon Resource Name (ARN) of a replication instance. # @return [String] # # @!attribute [rw] migration_type # The migration type. Valid values: `full-load` \| `cdc` \| # `full-load-and-cdc` # @return [String] # # @!attribute [rw] table_mappings # The table mappings for the task, in JSON format. For more # information, see [Table Mapping][1] in the *AWS Database Migration # User Guide.* # # # # [1]: https://docs.aws.amazon.com/dms/latest/userguide/CHAP_Tasks.CustomizingTasks.TableMapping.html # @return [String] # # @!attribute [rw] replication_task_settings # Overall settings for the task, in JSON format. For more information, # see [Task Settings][1] in the *AWS Database Migration User Guide.* # # # # [1]: https://docs.aws.amazon.com/dms/latest/userguide/CHAP_Tasks.CustomizingTasks.TaskSettings.html # @return [String] # # @!attribute [rw] cdc_start_time # Indicates the start time for a change data capture (CDC) operation. # Use either CdcStartTime or CdcStartPosition to specify when you want # a CDC operation to start. Specifying both values results in an # error. # # Timestamp Example: --cdc-start-time “2018-03-08T12:12:12” # @return [Time] # # @!attribute [rw] cdc_start_position # Indicates when you want a change data capture (CDC) operation to # start. Use either CdcStartPosition or CdcStartTime to specify when # you want a CDC operation to start. Specifying both values results in # an error. # # The value can be in date, checkpoint, or LSN/SCN format. # # Date Example: --cdc-start-position “2018-03-08T12:12:12” # # Checkpoint Example: --cdc-start-position # "checkpoint:V1#27#mysql-bin-changelog.157832:1975:-1:2002:677883278264080:mysql-bin-changelog.157832:1876#0#0#*#0#93" # # LSN Example: --cdc-start-position “mysql-bin-changelog.000024:373” # @return [String] # # @!attribute [rw] cdc_stop_position # Indicates when you want a change data capture (CDC) operation to # stop. The value can be either server time or commit time. # # Server time example: --cdc-stop-position # “server\_time:3018-02-09T12:12:12” # # Commit time example: --cdc-stop-position “commit\_time: # 3018-02-09T12:12:12 “ # @return [String] # # @!attribute [rw] tags # One or more tags to be assigned to the replication task. # @return [Array] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/CreateReplicationTaskMessage AWS API Documentation # class CreateReplicationTaskMessage < Struct.new( :replication_task_identifier, :source_endpoint_arn, :target_endpoint_arn, :replication_instance_arn, :migration_type, :table_mappings, :replication_task_settings, :cdc_start_time, :cdc_start_position, :cdc_stop_position, :tags) include Aws::Structure end # @!attribute [rw] replication_task # The replication task that was created. # @return [Types::ReplicationTask] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/CreateReplicationTaskResponse AWS API Documentation # class CreateReplicationTaskResponse < Struct.new( :replication_task) include Aws::Structure end # @note When making an API call, you may pass DeleteCertificateMessage # data as a hash: # # { # certificate_arn: "String", # required # } # # @!attribute [rw] certificate_arn # The Amazon Resource Name (ARN) of the deleted certificate. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DeleteCertificateMessage AWS API Documentation # class DeleteCertificateMessage < Struct.new( :certificate_arn) include Aws::Structure end # @!attribute [rw] certificate # The Secure Sockets Layer (SSL) certificate. # @return [Types::Certificate] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DeleteCertificateResponse AWS API Documentation # class DeleteCertificateResponse < Struct.new( :certificate) include Aws::Structure end # @note When making an API call, you may pass DeleteEndpointMessage # data as a hash: # # { # endpoint_arn: "String", # required # } # # @!attribute [rw] endpoint_arn # The Amazon Resource Name (ARN) string that uniquely identifies the # endpoint. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DeleteEndpointMessage AWS API Documentation # class DeleteEndpointMessage < Struct.new( :endpoint_arn) include Aws::Structure end # @!attribute [rw] endpoint # The endpoint that was deleted. # @return [Types::Endpoint] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DeleteEndpointResponse AWS API Documentation # class DeleteEndpointResponse < Struct.new( :endpoint) include Aws::Structure end # @note When making an API call, you may pass DeleteEventSubscriptionMessage # data as a hash: # # { # subscription_name: "String", # required # } # # @!attribute [rw] subscription_name # The name of the DMS event notification subscription to be deleted. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DeleteEventSubscriptionMessage AWS API Documentation # class DeleteEventSubscriptionMessage < Struct.new( :subscription_name) include Aws::Structure end # @!attribute [rw] event_subscription # The event subscription that was deleted. # @return [Types::EventSubscription] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DeleteEventSubscriptionResponse AWS API Documentation # class DeleteEventSubscriptionResponse < Struct.new( :event_subscription) include Aws::Structure end # @note When making an API call, you may pass DeleteReplicationInstanceMessage # data as a hash: # # { # replication_instance_arn: "String", # required # } # # @!attribute [rw] replication_instance_arn # The Amazon Resource Name (ARN) of the replication instance to be # deleted. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DeleteReplicationInstanceMessage AWS API Documentation # class DeleteReplicationInstanceMessage < Struct.new( :replication_instance_arn) include Aws::Structure end # @!attribute [rw] replication_instance # The replication instance that was deleted. # @return [Types::ReplicationInstance] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DeleteReplicationInstanceResponse AWS API Documentation # class DeleteReplicationInstanceResponse < Struct.new( :replication_instance) include Aws::Structure end # @note When making an API call, you may pass DeleteReplicationSubnetGroupMessage # data as a hash: # # { # replication_subnet_group_identifier: "String", # required # } # # @!attribute [rw] replication_subnet_group_identifier # The subnet group name of the replication instance. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DeleteReplicationSubnetGroupMessage AWS API Documentation # class DeleteReplicationSubnetGroupMessage < Struct.new( :replication_subnet_group_identifier) include Aws::Structure end # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DeleteReplicationSubnetGroupResponse AWS API Documentation # class DeleteReplicationSubnetGroupResponse < Aws::EmptyStructure; end # @note When making an API call, you may pass DeleteReplicationTaskMessage # data as a hash: # # { # replication_task_arn: "String", # required # } # # @!attribute [rw] replication_task_arn # The Amazon Resource Name (ARN) of the replication task to be # deleted. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DeleteReplicationTaskMessage AWS API Documentation # class DeleteReplicationTaskMessage < Struct.new( :replication_task_arn) include Aws::Structure end # @!attribute [rw] replication_task # The deleted replication task. # @return [Types::ReplicationTask] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DeleteReplicationTaskResponse AWS API Documentation # class DeleteReplicationTaskResponse < Struct.new( :replication_task) include Aws::Structure end # @api private # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DescribeAccountAttributesMessage AWS API Documentation # class DescribeAccountAttributesMessage < Aws::EmptyStructure; end # @!attribute [rw] account_quotas # Account quota information. # @return [Array] # # @!attribute [rw] unique_account_identifier # A unique AWS DMS identifier for an account in a particular AWS # Region. The value of this identifier has the following format: # `c99999999999`. DMS uses this identifier to name artifacts. For # example, DMS uses this identifier to name the default Amazon S3 # bucket for storing task assessment reports in a given AWS Region. # The format of this S3 bucket name is the following: # `dms-AccountNumber-UniqueAccountIdentifier.` Here is an example name # for this default S3 bucket: `dms-111122223333-c44445555666`. # # AWS DMS supports `UniqueAccountIdentifier` in versions 3.1.4 and # later. # # # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DescribeAccountAttributesResponse AWS API Documentation # class DescribeAccountAttributesResponse < Struct.new( :account_quotas, :unique_account_identifier) include Aws::Structure end # @note When making an API call, you may pass DescribeCertificatesMessage # data as a hash: # # { # filters: [ # { # name: "String", # required # values: ["String"], # required # }, # ], # max_records: 1, # marker: "String", # } # # @!attribute [rw] filters # Filters applied to the certificate described in the form of # key-value pairs. # @return [Array] # # @!attribute [rw] max_records # The maximum number of records to include in the response. If more # records exist than the specified `MaxRecords` value, a pagination # token called a marker is included in the response so that the # remaining results can be retrieved. # # Default: 10 # @return [Integer] # # @!attribute [rw] marker # An optional pagination token provided by a previous request. If this # parameter is specified, the response includes only records beyond # the marker, up to the vlue specified by `MaxRecords`. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DescribeCertificatesMessage AWS API Documentation # class DescribeCertificatesMessage < Struct.new( :filters, :max_records, :marker) include Aws::Structure end # @!attribute [rw] marker # The pagination token. # @return [String] # # @!attribute [rw] certificates # The Secure Sockets Layer (SSL) certificates associated with the # replication instance. # @return [Array] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DescribeCertificatesResponse AWS API Documentation # class DescribeCertificatesResponse < Struct.new( :marker, :certificates) include Aws::Structure end # @note When making an API call, you may pass DescribeConnectionsMessage # data as a hash: # # { # filters: [ # { # name: "String", # required # values: ["String"], # required # }, # ], # max_records: 1, # marker: "String", # } # # @!attribute [rw] filters # The filters applied to the connection. # # Valid filter names: endpoint-arn \| replication-instance-arn # @return [Array] # # @!attribute [rw] max_records # The maximum number of records to include in the response. If more # records exist than the specified `MaxRecords` value, a pagination # token called a marker is included in the response so that the # remaining results can be retrieved. # # Default: 100 # # Constraints: Minimum 20, maximum 100. # @return [Integer] # # @!attribute [rw] marker # An optional pagination token provided by a previous request. If this # parameter is specified, the response includes only records beyond # the marker, up to the value specified by `MaxRecords`. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DescribeConnectionsMessage AWS API Documentation # class DescribeConnectionsMessage < Struct.new( :filters, :max_records, :marker) include Aws::Structure end # @!attribute [rw] marker # An optional pagination token provided by a previous request. If this # parameter is specified, the response includes only records beyond # the marker, up to the value specified by `MaxRecords`. # @return [String] # # @!attribute [rw] connections # A description of the connections. # @return [Array] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DescribeConnectionsResponse AWS API Documentation # class DescribeConnectionsResponse < Struct.new( :marker, :connections) include Aws::Structure end # @note When making an API call, you may pass DescribeEndpointTypesMessage # data as a hash: # # { # filters: [ # { # name: "String", # required # values: ["String"], # required # }, # ], # max_records: 1, # marker: "String", # } # # @!attribute [rw] filters # Filters applied to the describe action. # # Valid filter names: engine-name \| endpoint-type # @return [Array] # # @!attribute [rw] max_records # The maximum number of records to include in the response. If more # records exist than the specified `MaxRecords` value, a pagination # token called a marker is included in the response so that the # remaining results can be retrieved. # # Default: 100 # # Constraints: Minimum 20, maximum 100. # @return [Integer] # # @!attribute [rw] marker # An optional pagination token provided by a previous request. If this # parameter is specified, the response includes only records beyond # the marker, up to the value specified by `MaxRecords`. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DescribeEndpointTypesMessage AWS API Documentation # class DescribeEndpointTypesMessage < Struct.new( :filters, :max_records, :marker) include Aws::Structure end # @!attribute [rw] marker # An optional pagination token provided by a previous request. If this # parameter is specified, the response includes only records beyond # the marker, up to the value specified by `MaxRecords`. # @return [String] # # @!attribute [rw] supported_endpoint_types # The types of endpoints that are supported. # @return [Array] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DescribeEndpointTypesResponse AWS API Documentation # class DescribeEndpointTypesResponse < Struct.new( :marker, :supported_endpoint_types) include Aws::Structure end # @note When making an API call, you may pass DescribeEndpointsMessage # data as a hash: # # { # filters: [ # { # name: "String", # required # values: ["String"], # required # }, # ], # max_records: 1, # marker: "String", # } # # @!attribute [rw] filters # Filters applied to the describe action. # # Valid filter names: endpoint-arn \| endpoint-type \| endpoint-id \| # engine-name # @return [Array] # # @!attribute [rw] max_records # The maximum number of records to include in the response. If more # records exist than the specified `MaxRecords` value, a pagination # token called a marker is included in the response so that the # remaining results can be retrieved. # # Default: 100 # # Constraints: Minimum 20, maximum 100. # @return [Integer] # # @!attribute [rw] marker # An optional pagination token provided by a previous request. If this # parameter is specified, the response includes only records beyond # the marker, up to the value specified by `MaxRecords`. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DescribeEndpointsMessage AWS API Documentation # class DescribeEndpointsMessage < Struct.new( :filters, :max_records, :marker) include Aws::Structure end # @!attribute [rw] marker # An optional pagination token provided by a previous request. If this # parameter is specified, the response includes only records beyond # the marker, up to the value specified by `MaxRecords`. # @return [String] # # @!attribute [rw] endpoints # Endpoint description. # @return [Array] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DescribeEndpointsResponse AWS API Documentation # class DescribeEndpointsResponse < Struct.new( :marker, :endpoints) include Aws::Structure end # @note When making an API call, you may pass DescribeEventCategoriesMessage # data as a hash: # # { # source_type: "String", # filters: [ # { # name: "String", # required # values: ["String"], # required # }, # ], # } # # @!attribute [rw] source_type # The type of AWS DMS resource that generates events. # # Valid values: replication-instance \| replication-task # @return [String] # # @!attribute [rw] filters # Filters applied to the action. # @return [Array] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DescribeEventCategoriesMessage AWS API Documentation # class DescribeEventCategoriesMessage < Struct.new( :source_type, :filters) include Aws::Structure end # @!attribute [rw] event_category_group_list # A list of event categories. # @return [Array] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DescribeEventCategoriesResponse AWS API Documentation # class DescribeEventCategoriesResponse < Struct.new( :event_category_group_list) include Aws::Structure end # @note When making an API call, you may pass DescribeEventSubscriptionsMessage # data as a hash: # # { # subscription_name: "String", # filters: [ # { # name: "String", # required # values: ["String"], # required # }, # ], # max_records: 1, # marker: "String", # } # # @!attribute [rw] subscription_name # The name of the AWS DMS event subscription to be described. # @return [String] # # @!attribute [rw] filters # Filters applied to the action. # @return [Array] # # @!attribute [rw] max_records # The maximum number of records to include in the response. If more # records exist than the specified `MaxRecords` value, a pagination # token called a marker is included in the response so that the # remaining results can be retrieved. # # Default: 100 # # Constraints: Minimum 20, maximum 100. # @return [Integer] # # @!attribute [rw] marker # An optional pagination token provided by a previous request. If this # parameter is specified, the response includes only records beyond # the marker, up to the value specified by `MaxRecords`. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DescribeEventSubscriptionsMessage AWS API Documentation # class DescribeEventSubscriptionsMessage < Struct.new( :subscription_name, :filters, :max_records, :marker) include Aws::Structure end # @!attribute [rw] marker # An optional pagination token provided by a previous request. If this # parameter is specified, the response includes only records beyond # the marker, up to the value specified by `MaxRecords`. # @return [String] # # @!attribute [rw] event_subscriptions_list # A list of event subscriptions. # @return [Array] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DescribeEventSubscriptionsResponse AWS API Documentation # class DescribeEventSubscriptionsResponse < Struct.new( :marker, :event_subscriptions_list) include Aws::Structure end # @note When making an API call, you may pass DescribeEventsMessage # data as a hash: # # { # source_identifier: "String", # source_type: "replication-instance", # accepts replication-instance # start_time: Time.now, # end_time: Time.now, # duration: 1, # event_categories: ["String"], # filters: [ # { # name: "String", # required # values: ["String"], # required # }, # ], # max_records: 1, # marker: "String", # } # # @!attribute [rw] source_identifier # The identifier of an event source. # @return [String] # # @!attribute [rw] source_type # The type of AWS DMS resource that generates events. # # Valid values: replication-instance \| replication-task # @return [String] # # @!attribute [rw] start_time # The start time for the events to be listed. # @return [Time] # # @!attribute [rw] end_time # The end time for the events to be listed. # @return [Time] # # @!attribute [rw] duration # The duration of the events to be listed. # @return [Integer] # # @!attribute [rw] event_categories # A list of event categories for the source type that you've chosen. # @return [Array] # # @!attribute [rw] filters # Filters applied to the action. # @return [Array] # # @!attribute [rw] max_records # The maximum number of records to include in the response. If more # records exist than the specified `MaxRecords` value, a pagination # token called a marker is included in the response so that the # remaining results can be retrieved. # # Default: 100 # # Constraints: Minimum 20, maximum 100. # @return [Integer] # # @!attribute [rw] marker # An optional pagination token provided by a previous request. If this # parameter is specified, the response includes only records beyond # the marker, up to the value specified by `MaxRecords`. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DescribeEventsMessage AWS API Documentation # class DescribeEventsMessage < Struct.new( :source_identifier, :source_type, :start_time, :end_time, :duration, :event_categories, :filters, :max_records, :marker) include Aws::Structure end # @!attribute [rw] marker # An optional pagination token provided by a previous request. If this # parameter is specified, the response includes only records beyond # the marker, up to the value specified by `MaxRecords`. # @return [String] # # @!attribute [rw] events # The events described. # @return [Array] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DescribeEventsResponse AWS API Documentation # class DescribeEventsResponse < Struct.new( :marker, :events) include Aws::Structure end # @note When making an API call, you may pass DescribeOrderableReplicationInstancesMessage # data as a hash: # # { # max_records: 1, # marker: "String", # } # # @!attribute [rw] max_records # The maximum number of records to include in the response. If more # records exist than the specified `MaxRecords` value, a pagination # token called a marker is included in the response so that the # remaining results can be retrieved. # # Default: 100 # # Constraints: Minimum 20, maximum 100. # @return [Integer] # # @!attribute [rw] marker # An optional pagination token provided by a previous request. If this # parameter is specified, the response includes only records beyond # the marker, up to the value specified by `MaxRecords`. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DescribeOrderableReplicationInstancesMessage AWS API Documentation # class DescribeOrderableReplicationInstancesMessage < Struct.new( :max_records, :marker) include Aws::Structure end # @!attribute [rw] orderable_replication_instances # The order-able replication instances available. # @return [Array] # # @!attribute [rw] marker # An optional pagination token provided by a previous request. If this # parameter is specified, the response includes only records beyond # the marker, up to the value specified by `MaxRecords`. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DescribeOrderableReplicationInstancesResponse AWS API Documentation # class DescribeOrderableReplicationInstancesResponse < Struct.new( :orderable_replication_instances, :marker) include Aws::Structure end # @note When making an API call, you may pass DescribePendingMaintenanceActionsMessage # data as a hash: # # { # replication_instance_arn: "String", # filters: [ # { # name: "String", # required # values: ["String"], # required # }, # ], # marker: "String", # max_records: 1, # } # # @!attribute [rw] replication_instance_arn # The Amazon Resource Name (ARN) of the replication instance. # @return [String] # # @!attribute [rw] filters # @return [Array] # # @!attribute [rw] marker # An optional pagination token provided by a previous request. If this # parameter is specified, the response includes only records beyond # the marker, up to the value specified by `MaxRecords`. # @return [String] # # @!attribute [rw] max_records # The maximum number of records to include in the response. If more # records exist than the specified `MaxRecords` value, a pagination # token called a marker is included in the response so that the # remaining results can be retrieved. # # Default: 100 # # Constraints: Minimum 20, maximum 100. # @return [Integer] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DescribePendingMaintenanceActionsMessage AWS API Documentation # class DescribePendingMaintenanceActionsMessage < Struct.new( :replication_instance_arn, :filters, :marker, :max_records) include Aws::Structure end # @!attribute [rw] pending_maintenance_actions # The pending maintenance action. # @return [Array] # # @!attribute [rw] marker # An optional pagination token provided by a previous request. If this # parameter is specified, the response includes only records beyond # the marker, up to the value specified by `MaxRecords`. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DescribePendingMaintenanceActionsResponse AWS API Documentation # class DescribePendingMaintenanceActionsResponse < Struct.new( :pending_maintenance_actions, :marker) include Aws::Structure end # @note When making an API call, you may pass DescribeRefreshSchemasStatusMessage # data as a hash: # # { # endpoint_arn: "String", # required # } # # @!attribute [rw] endpoint_arn # The Amazon Resource Name (ARN) string that uniquely identifies the # endpoint. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DescribeRefreshSchemasStatusMessage AWS API Documentation # class DescribeRefreshSchemasStatusMessage < Struct.new( :endpoint_arn) include Aws::Structure end # @!attribute [rw] refresh_schemas_status # The status of the schema. # @return [Types::RefreshSchemasStatus] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DescribeRefreshSchemasStatusResponse AWS API Documentation # class DescribeRefreshSchemasStatusResponse < Struct.new( :refresh_schemas_status) include Aws::Structure end # @note When making an API call, you may pass DescribeReplicationInstanceTaskLogsMessage # data as a hash: # # { # replication_instance_arn: "String", # required # max_records: 1, # marker: "String", # } # # @!attribute [rw] replication_instance_arn # The Amazon Resource Name (ARN) of the replication instance. # @return [String] # # @!attribute [rw] max_records # The maximum number of records to include in the response. If more # records exist than the specified `MaxRecords` value, a pagination # token called a marker is included in the response so that the # remaining results can be retrieved. # # Default: 100 # # Constraints: Minimum 20, maximum 100. # @return [Integer] # # @!attribute [rw] marker # An optional pagination token provided by a previous request. If this # parameter is specified, the response includes only records beyond # the marker, up to the value specified by `MaxRecords`. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DescribeReplicationInstanceTaskLogsMessage AWS API Documentation # class DescribeReplicationInstanceTaskLogsMessage < Struct.new( :replication_instance_arn, :max_records, :marker) include Aws::Structure end # @!attribute [rw] replication_instance_arn # The Amazon Resource Name (ARN) of the replication instance. # @return [String] # # @!attribute [rw] replication_instance_task_logs # An array of replication task log metadata. Each member of the array # contains the replication task name, ARN, and task log size (in # bytes). # @return [Array] # # @!attribute [rw] marker # An optional pagination token provided by a previous request. If this # parameter is specified, the response includes only records beyond # the marker, up to the value specified by `MaxRecords`. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DescribeReplicationInstanceTaskLogsResponse AWS API Documentation # class DescribeReplicationInstanceTaskLogsResponse < Struct.new( :replication_instance_arn, :replication_instance_task_logs, :marker) include Aws::Structure end # @note When making an API call, you may pass DescribeReplicationInstancesMessage # data as a hash: # # { # filters: [ # { # name: "String", # required # values: ["String"], # required # }, # ], # max_records: 1, # marker: "String", # } # # @!attribute [rw] filters # Filters applied to the describe action. # # Valid filter names: replication-instance-arn \| # replication-instance-id \| replication-instance-class \| # engine-version # @return [Array] # # @!attribute [rw] max_records # The maximum number of records to include in the response. If more # records exist than the specified `MaxRecords` value, a pagination # token called a marker is included in the response so that the # remaining results can be retrieved. # # Default: 100 # # Constraints: Minimum 20, maximum 100. # @return [Integer] # # @!attribute [rw] marker # An optional pagination token provided by a previous request. If this # parameter is specified, the response includes only records beyond # the marker, up to the value specified by `MaxRecords`. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DescribeReplicationInstancesMessage AWS API Documentation # class DescribeReplicationInstancesMessage < Struct.new( :filters, :max_records, :marker) include Aws::Structure end # @!attribute [rw] marker # An optional pagination token provided by a previous request. If this # parameter is specified, the response includes only records beyond # the marker, up to the value specified by `MaxRecords`. # @return [String] # # @!attribute [rw] replication_instances # The replication instances described. # @return [Array] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DescribeReplicationInstancesResponse AWS API Documentation # class DescribeReplicationInstancesResponse < Struct.new( :marker, :replication_instances) include Aws::Structure end # @note When making an API call, you may pass DescribeReplicationSubnetGroupsMessage # data as a hash: # # { # filters: [ # { # name: "String", # required # values: ["String"], # required # }, # ], # max_records: 1, # marker: "String", # } # # @!attribute [rw] filters # Filters applied to the describe action. # @return [Array] # # @!attribute [rw] max_records # The maximum number of records to include in the response. If more # records exist than the specified `MaxRecords` value, a pagination # token called a marker is included in the response so that the # remaining results can be retrieved. # # Default: 100 # # Constraints: Minimum 20, maximum 100. # @return [Integer] # # @!attribute [rw] marker # An optional pagination token provided by a previous request. If this # parameter is specified, the response includes only records beyond # the marker, up to the value specified by `MaxRecords`. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DescribeReplicationSubnetGroupsMessage AWS API Documentation # class DescribeReplicationSubnetGroupsMessage < Struct.new( :filters, :max_records, :marker) include Aws::Structure end # @!attribute [rw] marker # An optional pagination token provided by a previous request. If this # parameter is specified, the response includes only records beyond # the marker, up to the value specified by `MaxRecords`. # @return [String] # # @!attribute [rw] replication_subnet_groups # A description of the replication subnet groups. # @return [Array] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DescribeReplicationSubnetGroupsResponse AWS API Documentation # class DescribeReplicationSubnetGroupsResponse < Struct.new( :marker, :replication_subnet_groups) include Aws::Structure end # @note When making an API call, you may pass DescribeReplicationTaskAssessmentResultsMessage # data as a hash: # # { # replication_task_arn: "String", # max_records: 1, # marker: "String", # } # # @!attribute [rw] replication_task_arn # \- The Amazon Resource Name (ARN) string that uniquely identifies the # task. When this input parameter is specified the API will return # only one result and ignore the values of the max-records and marker # parameters. # @return [String] # # @!attribute [rw] max_records # The maximum number of records to include in the response. If more # records exist than the specified `MaxRecords` value, a pagination # token called a marker is included in the response so that the # remaining results can be retrieved. # # Default: 100 # # Constraints: Minimum 20, maximum 100. # @return [Integer] # # @!attribute [rw] marker # An optional pagination token provided by a previous request. If this # parameter is specified, the response includes only records beyond # the marker, up to the value specified by `MaxRecords`. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DescribeReplicationTaskAssessmentResultsMessage AWS API Documentation # class DescribeReplicationTaskAssessmentResultsMessage < Struct.new( :replication_task_arn, :max_records, :marker) include Aws::Structure end # @!attribute [rw] marker # An optional pagination token provided by a previous request. If this # parameter is specified, the response includes only records beyond # the marker, up to the value specified by `MaxRecords`. # @return [String] # # @!attribute [rw] bucket_name # \- The Amazon S3 bucket where the task assessment report is located. # @return [String] # # @!attribute [rw] replication_task_assessment_results # The task assessment report. # @return [Array] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DescribeReplicationTaskAssessmentResultsResponse AWS API Documentation # class DescribeReplicationTaskAssessmentResultsResponse < Struct.new( :marker, :bucket_name, :replication_task_assessment_results) include Aws::Structure end # @note When making an API call, you may pass DescribeReplicationTasksMessage # data as a hash: # # { # filters: [ # { # name: "String", # required # values: ["String"], # required # }, # ], # max_records: 1, # marker: "String", # without_settings: false, # } # # @!attribute [rw] filters # Filters applied to the describe action. # # Valid filter names: replication-task-arn \| replication-task-id \| # migration-type \| endpoint-arn \| replication-instance-arn # @return [Array] # # @!attribute [rw] max_records # The maximum number of records to include in the response. If more # records exist than the specified `MaxRecords` value, a pagination # token called a marker is included in the response so that the # remaining results can be retrieved. # # Default: 100 # # Constraints: Minimum 20, maximum 100. # @return [Integer] # # @!attribute [rw] marker # An optional pagination token provided by a previous request. If this # parameter is specified, the response includes only records beyond # the marker, up to the value specified by `MaxRecords`. # @return [String] # # @!attribute [rw] without_settings # An option to set to avoid returning information about settings. Use # this to reduce overhead when setting information is too large. To # use this option, choose `true`; otherwise, choose `false` (the # default). # @return [Boolean] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DescribeReplicationTasksMessage AWS API Documentation # class DescribeReplicationTasksMessage < Struct.new( :filters, :max_records, :marker, :without_settings) include Aws::Structure end # @!attribute [rw] marker # An optional pagination token provided by a previous request. If this # parameter is specified, the response includes only records beyond # the marker, up to the value specified by `MaxRecords`. # @return [String] # # @!attribute [rw] replication_tasks # A description of the replication tasks. # @return [Array] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DescribeReplicationTasksResponse AWS API Documentation # class DescribeReplicationTasksResponse < Struct.new( :marker, :replication_tasks) include Aws::Structure end # @note When making an API call, you may pass DescribeSchemasMessage # data as a hash: # # { # endpoint_arn: "String", # required # max_records: 1, # marker: "String", # } # # @!attribute [rw] endpoint_arn # The Amazon Resource Name (ARN) string that uniquely identifies the # endpoint. # @return [String] # # @!attribute [rw] max_records # The maximum number of records to include in the response. If more # records exist than the specified `MaxRecords` value, a pagination # token called a marker is included in the response so that the # remaining results can be retrieved. # # Default: 100 # # Constraints: Minimum 20, maximum 100. # @return [Integer] # # @!attribute [rw] marker # An optional pagination token provided by a previous request. If this # parameter is specified, the response includes only records beyond # the marker, up to the value specified by `MaxRecords`. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DescribeSchemasMessage AWS API Documentation # class DescribeSchemasMessage < Struct.new( :endpoint_arn, :max_records, :marker) include Aws::Structure end # @!attribute [rw] marker # An optional pagination token provided by a previous request. If this # parameter is specified, the response includes only records beyond # the marker, up to the value specified by `MaxRecords`. # @return [String] # # @!attribute [rw] schemas # The described schema. # @return [Array] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DescribeSchemasResponse AWS API Documentation # class DescribeSchemasResponse < Struct.new( :marker, :schemas) include Aws::Structure end # @note When making an API call, you may pass DescribeTableStatisticsMessage # data as a hash: # # { # replication_task_arn: "String", # required # max_records: 1, # marker: "String", # filters: [ # { # name: "String", # required # values: ["String"], # required # }, # ], # } # # @!attribute [rw] replication_task_arn # The Amazon Resource Name (ARN) of the replication task. # @return [String] # # @!attribute [rw] max_records # The maximum number of records to include in the response. If more # records exist than the specified `MaxRecords` value, a pagination # token called a marker is included in the response so that the # remaining results can be retrieved. # # Default: 100 # # Constraints: Minimum 20, maximum 500. # @return [Integer] # # @!attribute [rw] marker # An optional pagination token provided by a previous request. If this # parameter is specified, the response includes only records beyond # the marker, up to the value specified by `MaxRecords`. # @return [String] # # @!attribute [rw] filters # Filters applied to the describe table statistics action. # # Valid filter names: schema-name \| table-name \| table-state # # A combination of filters creates an AND condition where each record # matches all specified filters. # @return [Array] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DescribeTableStatisticsMessage AWS API Documentation # class DescribeTableStatisticsMessage < Struct.new( :replication_task_arn, :max_records, :marker, :filters) include Aws::Structure end # @!attribute [rw] replication_task_arn # The Amazon Resource Name (ARN) of the replication task. # @return [String] # # @!attribute [rw] table_statistics # The table statistics. # @return [Array] # # @!attribute [rw] marker # An optional pagination token provided by a previous request. If this # parameter is specified, the response includes only records beyond # the marker, up to the value specified by `MaxRecords`. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DescribeTableStatisticsResponse AWS API Documentation # class DescribeTableStatisticsResponse < Struct.new( :replication_task_arn, :table_statistics, :marker) include Aws::Structure end # The settings in JSON format for the DMS Transfer type source endpoint. # # @note When making an API call, you may pass DmsTransferSettings # data as a hash: # # { # service_access_role_arn: "String", # bucket_name: "String", # } # # @!attribute [rw] service_access_role_arn # The IAM role that has permission to access the Amazon S3 bucket. # @return [String] # # @!attribute [rw] bucket_name # The name of the S3 bucket to use. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DmsTransferSettings AWS API Documentation # class DmsTransferSettings < Struct.new( :service_access_role_arn, :bucket_name) include Aws::Structure end # @note When making an API call, you may pass DynamoDbSettings # data as a hash: # # { # service_access_role_arn: "String", # required # } # # @!attribute [rw] service_access_role_arn # The Amazon Resource Name (ARN) used by the service access IAM role. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/DynamoDbSettings AWS API Documentation # class DynamoDbSettings < Struct.new( :service_access_role_arn) include Aws::Structure end # @note When making an API call, you may pass ElasticsearchSettings # data as a hash: # # { # service_access_role_arn: "String", # required # endpoint_uri: "String", # required # full_load_error_percentage: 1, # error_retry_duration: 1, # } # # @!attribute [rw] service_access_role_arn # The Amazon Resource Name (ARN) used by service to access the IAM # role. # @return [String] # # @!attribute [rw] endpoint_uri # The endpoint for the Elasticsearch cluster. # @return [String] # # @!attribute [rw] full_load_error_percentage # The maximum percentage of records that can fail to be written before # a full load operation stops. # @return [Integer] # # @!attribute [rw] error_retry_duration # The maximum number of seconds that DMS retries failed API requests # to the Elasticsearch cluster. # @return [Integer] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/ElasticsearchSettings AWS API Documentation # class ElasticsearchSettings < Struct.new( :service_access_role_arn, :endpoint_uri, :full_load_error_percentage, :error_retry_duration) include Aws::Structure end # @!attribute [rw] endpoint_identifier # The database endpoint identifier. Identifiers must begin with a # letter; must contain only ASCII letters, digits, and hyphens; and # must not end with a hyphen or contain two consecutive hyphens. # @return [String] # # @!attribute [rw] endpoint_type # The type of endpoint. Valid values are `source` and `target`. # @return [String] # # @!attribute [rw] engine_name # The database engine name. Valid values, depending on the # EndpointType, include mysql, oracle, postgres, mariadb, aurora, # aurora-postgresql, redshift, s3, db2, azuredb, sybase, dynamodb, # mongodb, and sqlserver. # @return [String] # # @!attribute [rw] engine_display_name # The expanded name for the engine name. For example, if the # `EngineName` parameter is "aurora," this value would be "Amazon # Aurora MySQL." # @return [String] # # @!attribute [rw] username # The user name used to connect to the endpoint. # @return [String] # # @!attribute [rw] server_name # The name of the server at the endpoint. # @return [String] # # @!attribute [rw] port # The port value used to access the endpoint. # @return [Integer] # # @!attribute [rw] database_name # The name of the database at the endpoint. # @return [String] # # @!attribute [rw] extra_connection_attributes # Additional connection attributes used to connect to the endpoint. # @return [String] # # @!attribute [rw] status # The status of the endpoint. # @return [String] # # @!attribute [rw] kms_key_id # An AWS KMS key identifier that is used to encrypt the connection # parameters for the endpoint. # # If you don't specify a value for the `KmsKeyId` parameter, then AWS # DMS uses your default encryption key. # # AWS KMS creates the default encryption key for your AWS account. # Your AWS account has a different default encryption key for each AWS # Region. # @return [String] # # @!attribute [rw] endpoint_arn # The Amazon Resource Name (ARN) string that uniquely identifies the # endpoint. # @return [String] # # @!attribute [rw] certificate_arn # The Amazon Resource Name (ARN) used for SSL connection to the # endpoint. # @return [String] # # @!attribute [rw] ssl_mode # The SSL mode used to connect to the endpoint. The default value is # `none`. # @return [String] # # @!attribute [rw] service_access_role_arn # The Amazon Resource Name (ARN) used by the service access IAM role. # @return [String] # # @!attribute [rw] external_table_definition # The external table definition. # @return [String] # # @!attribute [rw] external_id # Value returned by a call to CreateEndpoint that can be used for # cross-account validation. Use it on a subsequent call to # CreateEndpoint to create the endpoint with a cross-account. # @return [String] # # @!attribute [rw] dynamo_db_settings # The settings for the target DynamoDB database. For more information, # see the `DynamoDBSettings` structure. # @return [Types::DynamoDbSettings] # # @!attribute [rw] s3_settings # The settings for the S3 target endpoint. For more information, see # the `S3Settings` structure. # @return [Types::S3Settings] # # @!attribute [rw] dms_transfer_settings # The settings in JSON format for the DMS transfer type of source # endpoint. # # Possible attributes include the following: # # * `serviceAccessRoleArn` - The IAM role that has permission to # access the Amazon S3 bucket. # # * `bucketName` - The name of the S3 bucket to use. # # * `compressionType` - An optional parameter to use GZIP to compress # the target files. To use GZIP, set this value to `NONE` (the # default). To keep the files uncompressed, don't use this value. # # Shorthand syntax for these attributes is as follows: # `ServiceAccessRoleArn=string,BucketName=string,CompressionType=string` # # JSON syntax for these attributes is as follows: `\{ # "ServiceAccessRoleArn": "string", "BucketName": "string", # "CompressionType": "none"|"gzip" \} ` # @return [Types::DmsTransferSettings] # # @!attribute [rw] mongo_db_settings # The settings for the MongoDB source endpoint. For more information, # see the `MongoDbSettings` structure. # @return [Types::MongoDbSettings] # # @!attribute [rw] kinesis_settings # The settings for the Amazon Kinesis source endpoint. For more # information, see the `KinesisSettings` structure. # @return [Types::KinesisSettings] # # @!attribute [rw] elasticsearch_settings # The settings for the Elasticsearch source endpoint. For more # information, see the `ElasticsearchSettings` structure. # @return [Types::ElasticsearchSettings] # # @!attribute [rw] redshift_settings # Settings for the Amazon Redshift endpoint. # @return [Types::RedshiftSettings] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/Endpoint AWS API Documentation # class Endpoint < Struct.new( :endpoint_identifier, :endpoint_type, :engine_name, :engine_display_name, :username, :server_name, :port, :database_name, :extra_connection_attributes, :status, :kms_key_id, :endpoint_arn, :certificate_arn, :ssl_mode, :service_access_role_arn, :external_table_definition, :external_id, :dynamo_db_settings, :s3_settings, :dms_transfer_settings, :mongo_db_settings, :kinesis_settings, :elasticsearch_settings, :redshift_settings) include Aws::Structure end # @!attribute [rw] source_identifier # The identifier of an event source. # @return [String] # # @!attribute [rw] source_type # The type of AWS DMS resource that generates events. # # Valid values: replication-instance \| endpoint \| replication-task # @return [String] # # @!attribute [rw] message # The event message. # @return [String] # # @!attribute [rw] event_categories # The event categories available for the specified source type. # @return [Array] # # @!attribute [rw] date # The date of the event. # @return [Time] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/Event AWS API Documentation # class Event < Struct.new( :source_identifier, :source_type, :message, :event_categories, :date) include Aws::Structure end # @!attribute [rw] source_type # The type of AWS DMS resource that generates events. # # Valid values: replication-instance \| replication-server \| # security-group \| replication-task # @return [String] # # @!attribute [rw] event_categories # A list of event categories from a source type that you've chosen. # @return [Array] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/EventCategoryGroup AWS API Documentation # class EventCategoryGroup < Struct.new( :source_type, :event_categories) include Aws::Structure end # @!attribute [rw] customer_aws_id # The AWS customer account associated with the AWS DMS event # notification subscription. # @return [String] # # @!attribute [rw] cust_subscription_id # The AWS DMS event notification subscription Id. # @return [String] # # @!attribute [rw] sns_topic_arn # The topic ARN of the AWS DMS event notification subscription. # @return [String] # # @!attribute [rw] status # The status of the AWS DMS event notification subscription. # # Constraints: # # Can be one of the following: creating \| modifying \| deleting \| # active \| no-permission \| topic-not-exist # # The status "no-permission" indicates that AWS DMS no longer has # permission to post to the SNS topic. The status "topic-not-exist" # indicates that the topic was deleted after the subscription was # created. # @return [String] # # @!attribute [rw] subscription_creation_time # The time the RDS event notification subscription was created. # @return [String] # # @!attribute [rw] source_type # The type of AWS DMS resource that generates events. # # Valid values: replication-instance \| replication-server \| # security-group \| replication-task # @return [String] # # @!attribute [rw] source_ids_list # A list of source Ids for the event subscription. # @return [Array] # # @!attribute [rw] event_categories_list # A lists of event categories. # @return [Array] # # @!attribute [rw] enabled # Boolean value that indicates if the event subscription is enabled. # @return [Boolean] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/EventSubscription AWS API Documentation # class EventSubscription < Struct.new( :customer_aws_id, :cust_subscription_id, :sns_topic_arn, :status, :subscription_creation_time, :source_type, :source_ids_list, :event_categories_list, :enabled) include Aws::Structure end # @note When making an API call, you may pass Filter # data as a hash: # # { # name: "String", # required # values: ["String"], # required # } # # @!attribute [rw] name # The name of the filter. # @return [String] # # @!attribute [rw] values # The filter value. # @return [Array] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/Filter AWS API Documentation # class Filter < Struct.new( :name, :values) include Aws::Structure end # @note When making an API call, you may pass ImportCertificateMessage # data as a hash: # # { # certificate_identifier: "String", # required # certificate_pem: "String", # certificate_wallet: "data", # tags: [ # { # key: "String", # value: "String", # }, # ], # } # # @!attribute [rw] certificate_identifier # A customer-assigned name for the certificate. Identifiers must begin # with a letter; must contain only ASCII letters, digits, and hyphens; # and must not end with a hyphen or contain two consecutive hyphens. # @return [String] # # @!attribute [rw] certificate_pem # The contents of a `.pem` file, which contains an X.509 certificate. # @return [String] # # @!attribute [rw] certificate_wallet # The location of an imported Oracle Wallet certificate for use with # SSL. # @return [String] # # @!attribute [rw] tags # The tags associated with the certificate. # @return [Array] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/ImportCertificateMessage AWS API Documentation # class ImportCertificateMessage < Struct.new( :certificate_identifier, :certificate_pem, :certificate_wallet, :tags) include Aws::Structure end # @!attribute [rw] certificate # The certificate to be uploaded. # @return [Types::Certificate] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/ImportCertificateResponse AWS API Documentation # class ImportCertificateResponse < Struct.new( :certificate) include Aws::Structure end # There are not enough resources allocated to the database migration. # # @!attribute [rw] message # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/InsufficientResourceCapacityFault AWS API Documentation # class InsufficientResourceCapacityFault < Struct.new( :message) include Aws::Structure end # The certificate was not valid. # # @!attribute [rw] message # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/InvalidCertificateFault AWS API Documentation # class InvalidCertificateFault < Struct.new( :message) include Aws::Structure end # The resource is in a state that prevents it from being used for # database migration. # # @!attribute [rw] message # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/InvalidResourceStateFault AWS API Documentation # class InvalidResourceStateFault < Struct.new( :message) include Aws::Structure end # The subnet provided is invalid. # # @!attribute [rw] message # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/InvalidSubnet AWS API Documentation # class InvalidSubnet < Struct.new( :message) include Aws::Structure end # The ciphertext references a key that doesn't exist or that the DMS # account doesn't have access to. # # @!attribute [rw] message # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/KMSAccessDeniedFault AWS API Documentation # class KMSAccessDeniedFault < Struct.new( :message) include Aws::Structure end # The specified master key (CMK) isn't enabled. # # @!attribute [rw] message # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/KMSDisabledFault AWS API Documentation # class KMSDisabledFault < Struct.new( :message) include Aws::Structure end # The state of the specified AWS KMS resource isn't valid for this # request. # # @!attribute [rw] message # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/KMSInvalidStateFault AWS API Documentation # class KMSInvalidStateFault < Struct.new( :message) include Aws::Structure end # AWS DMS cannot access the AWS KMS key. # # @!attribute [rw] message # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/KMSKeyNotAccessibleFault AWS API Documentation # class KMSKeyNotAccessibleFault < Struct.new( :message) include Aws::Structure end # The specified AWS KMS entity or resource can't be found. # # @!attribute [rw] message # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/KMSNotFoundFault AWS API Documentation # class KMSNotFoundFault < Struct.new( :message) include Aws::Structure end # This request triggered AWS KMS request throttling. # # @!attribute [rw] message # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/KMSThrottlingFault AWS API Documentation # class KMSThrottlingFault < Struct.new( :message) include Aws::Structure end # @note When making an API call, you may pass KinesisSettings # data as a hash: # # { # stream_arn: "String", # message_format: "json", # accepts json # service_access_role_arn: "String", # } # # @!attribute [rw] stream_arn # The Amazon Resource Name (ARN) for the Amazon Kinesis Data Streams # endpoint. # @return [String] # # @!attribute [rw] message_format # The output format for the records created on the endpoint. The # message format is `JSON`. # @return [String] # # @!attribute [rw] service_access_role_arn # The Amazon Resource Name (ARN) for the IAM role that DMS uses to # write to the Amazon Kinesis data stream. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/KinesisSettings AWS API Documentation # class KinesisSettings < Struct.new( :stream_arn, :message_format, :service_access_role_arn) include Aws::Structure end # @note When making an API call, you may pass ListTagsForResourceMessage # data as a hash: # # { # resource_arn: "String", # required # } # # @!attribute [rw] resource_arn # The Amazon Resource Name (ARN) string that uniquely identifies the # AWS DMS resource. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/ListTagsForResourceMessage AWS API Documentation # class ListTagsForResourceMessage < Struct.new( :resource_arn) include Aws::Structure end # @!attribute [rw] tag_list # A list of tags for the resource. # @return [Array] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/ListTagsForResourceResponse AWS API Documentation # class ListTagsForResourceResponse < Struct.new( :tag_list) include Aws::Structure end # @note When making an API call, you may pass ModifyEndpointMessage # data as a hash: # # { # endpoint_arn: "String", # required # endpoint_identifier: "String", # endpoint_type: "source", # accepts source, target # engine_name: "String", # username: "String", # password: "SecretString", # server_name: "String", # port: 1, # database_name: "String", # extra_connection_attributes: "String", # certificate_arn: "String", # ssl_mode: "none", # accepts none, require, verify-ca, verify-full # service_access_role_arn: "String", # external_table_definition: "String", # dynamo_db_settings: { # service_access_role_arn: "String", # required # }, # s3_settings: { # service_access_role_arn: "String", # external_table_definition: "String", # csv_row_delimiter: "String", # csv_delimiter: "String", # bucket_folder: "String", # bucket_name: "String", # compression_type: "none", # accepts none, gzip # encryption_mode: "sse-s3", # accepts sse-s3, sse-kms # server_side_encryption_kms_key_id: "String", # data_format: "csv", # accepts csv, parquet # encoding_type: "plain", # accepts plain, plain-dictionary, rle-dictionary # dict_page_size_limit: 1, # row_group_length: 1, # data_page_size: 1, # parquet_version: "parquet-1-0", # accepts parquet-1-0, parquet-2-0 # enable_statistics: false, # include_op_for_full_load: false, # cdc_inserts_only: false, # timestamp_column_name: "String", # }, # dms_transfer_settings: { # service_access_role_arn: "String", # bucket_name: "String", # }, # mongo_db_settings: { # username: "String", # password: "SecretString", # server_name: "String", # port: 1, # database_name: "String", # auth_type: "no", # accepts no, password # auth_mechanism: "default", # accepts default, mongodb_cr, scram_sha_1 # nesting_level: "none", # accepts none, one # extract_doc_id: "String", # docs_to_investigate: "String", # auth_source: "String", # kms_key_id: "String", # }, # kinesis_settings: { # stream_arn: "String", # message_format: "json", # accepts json # service_access_role_arn: "String", # }, # elasticsearch_settings: { # service_access_role_arn: "String", # required # endpoint_uri: "String", # required # full_load_error_percentage: 1, # error_retry_duration: 1, # }, # redshift_settings: { # accept_any_date: false, # after_connect_script: "String", # bucket_folder: "String", # bucket_name: "String", # connection_timeout: 1, # database_name: "String", # date_format: "String", # empty_as_null: false, # encryption_mode: "sse-s3", # accepts sse-s3, sse-kms # file_transfer_upload_streams: 1, # load_timeout: 1, # max_file_size: 1, # password: "SecretString", # port: 1, # remove_quotes: false, # replace_invalid_chars: "String", # replace_chars: "String", # server_name: "String", # service_access_role_arn: "String", # server_side_encryption_kms_key_id: "String", # time_format: "String", # trim_blanks: false, # truncate_columns: false, # username: "String", # write_buffer_size: 1, # }, # } # # @!attribute [rw] endpoint_arn # The Amazon Resource Name (ARN) string that uniquely identifies the # endpoint. # @return [String] # # @!attribute [rw] endpoint_identifier # The database endpoint identifier. Identifiers must begin with a # letter; must contain only ASCII letters, digits, and hyphens; and # must not end with a hyphen or contain two consecutive hyphens. # @return [String] # # @!attribute [rw] endpoint_type # The type of endpoint. Valid values are `source` and `target`. # @return [String] # # @!attribute [rw] engine_name # The type of engine for the endpoint. Valid values, depending on the # EndpointType, include mysql, oracle, postgres, mariadb, aurora, # aurora-postgresql, redshift, s3, db2, azuredb, sybase, dynamodb, # mongodb, and sqlserver. # @return [String] # # @!attribute [rw] username # The user name to be used to login to the endpoint database. # @return [String] # # @!attribute [rw] password # The password to be used to login to the endpoint database. # @return [String] # # @!attribute [rw] server_name # The name of the server where the endpoint database resides. # @return [String] # # @!attribute [rw] port # The port used by the endpoint database. # @return [Integer] # # @!attribute [rw] database_name # The name of the endpoint database. # @return [String] # # @!attribute [rw] extra_connection_attributes # Additional attributes associated with the connection. To reset this # parameter, pass the empty string ("") as an argument. # @return [String] # # @!attribute [rw] certificate_arn # The Amazon Resource Name (ARN) of the certificate used for SSL # connection. # @return [String] # # @!attribute [rw] ssl_mode # The SSL mode used to connect to the endpoint. The default value is # `none`. # @return [String] # # @!attribute [rw] service_access_role_arn # The Amazon Resource Name (ARN) for the service access role you want # to use to modify the endpoint. # @return [String] # # @!attribute [rw] external_table_definition # The external table definition. # @return [String] # # @!attribute [rw] dynamo_db_settings # Settings in JSON format for the target Amazon DynamoDB endpoint. For # more information about the available settings, see [Using Object # Mapping to Migrate Data to DynamoDB][1] in the *AWS Database # Migration Service User Guide.* # # # # [1]: https://docs.aws.amazon.com/dms/latest/userguide/CHAP_Target.DynamoDB.html # @return [Types::DynamoDbSettings] # # @!attribute [rw] s3_settings # Settings in JSON format for the target Amazon S3 endpoint. For more # information about the available settings, see [Extra Connection # Attributes When Using Amazon S3 as a Target for AWS DMS][1] in the # *AWS Database Migration Service User Guide.* # # # # [1]: https://docs.aws.amazon.com/dms/latest/userguide/CHAP_Target.S3.html#CHAP_Target.S3.Configuring # @return [Types::S3Settings] # # @!attribute [rw] dms_transfer_settings # The settings in JSON format for the DMS transfer type of source # endpoint. # # Attributes include the following: # # * serviceAccessRoleArn - The IAM role that has permission to access # the Amazon S3 bucket. # # * BucketName - The name of the S3 bucket to use. # # * compressionType - An optional parameter to use GZIP to compress # the target files. Set to NONE (the default) or do not use to leave # the files uncompressed. # # Shorthand syntax: ServiceAccessRoleArn=string # ,BucketName=string,CompressionType=string # # JSON syntax: # # \\\{ "ServiceAccessRoleArn": "string", "BucketName": # "string", "CompressionType": "none"\|"gzip" \\} # @return [Types::DmsTransferSettings] # # @!attribute [rw] mongo_db_settings # Settings in JSON format for the source MongoDB endpoint. For more # information about the available settings, see the configuration # properties section in [ Using MongoDB as a Target for AWS Database # Migration Service][1] in the *AWS Database Migration Service User # Guide.* # # # # [1]: https://docs.aws.amazon.com/dms/latest/userguide/CHAP_Source.MongoDB.html # @return [Types::MongoDbSettings] # # @!attribute [rw] kinesis_settings # Settings in JSON format for the target Amazon Kinesis Data Streams # endpoint. For more information about the available settings, see # [Using Object Mapping to Migrate Data to a Kinesis Data Stream][1] # in the *AWS Database Migration User Guide.* # # # # [1]: https://docs.aws.amazon.com/dms/latest/userguide/CHAP_Target.Kinesis.html#CHAP_Target.Kinesis.ObjectMapping # @return [Types::KinesisSettings] # # @!attribute [rw] elasticsearch_settings # Settings in JSON format for the target Elasticsearch endpoint. For # more information about the available settings, see [Extra Connection # Attributes When Using Elasticsearch as a Target for AWS DMS][1] in # the *AWS Database Migration User Guide.* # # # # [1]: https://docs.aws.amazon.com/dms/latest/userguide/CHAP_Target.Elasticsearch.html#CHAP_Target.Elasticsearch.Configuration # @return [Types::ElasticsearchSettings] # # @!attribute [rw] redshift_settings # @return [Types::RedshiftSettings] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/ModifyEndpointMessage AWS API Documentation # class ModifyEndpointMessage < Struct.new( :endpoint_arn, :endpoint_identifier, :endpoint_type, :engine_name, :username, :password, :server_name, :port, :database_name, :extra_connection_attributes, :certificate_arn, :ssl_mode, :service_access_role_arn, :external_table_definition, :dynamo_db_settings, :s3_settings, :dms_transfer_settings, :mongo_db_settings, :kinesis_settings, :elasticsearch_settings, :redshift_settings) include Aws::Structure end # @!attribute [rw] endpoint # The modified endpoint. # @return [Types::Endpoint] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/ModifyEndpointResponse AWS API Documentation # class ModifyEndpointResponse < Struct.new( :endpoint) include Aws::Structure end # @note When making an API call, you may pass ModifyEventSubscriptionMessage # data as a hash: # # { # subscription_name: "String", # required # sns_topic_arn: "String", # source_type: "String", # event_categories: ["String"], # enabled: false, # } # # @!attribute [rw] subscription_name # The name of the AWS DMS event notification subscription to be # modified. # @return [String] # # @!attribute [rw] sns_topic_arn # The Amazon Resource Name (ARN) of the Amazon SNS topic created for # event notification. The ARN is created by Amazon SNS when you create # a topic and subscribe to it. # @return [String] # # @!attribute [rw] source_type # The type of AWS DMS resource that generates the events you want to # subscribe to. # # Valid values: replication-instance \| replication-task # @return [String] # # @!attribute [rw] event_categories # A list of event categories for a source type that you want to # subscribe to. Use the `DescribeEventCategories` action to see a list # of event categories. # @return [Array] # # @!attribute [rw] enabled # A Boolean value; set to **true** to activate the subscription. # @return [Boolean] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/ModifyEventSubscriptionMessage AWS API Documentation # class ModifyEventSubscriptionMessage < Struct.new( :subscription_name, :sns_topic_arn, :source_type, :event_categories, :enabled) include Aws::Structure end # @!attribute [rw] event_subscription # The modified event subscription. # @return [Types::EventSubscription] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/ModifyEventSubscriptionResponse AWS API Documentation # class ModifyEventSubscriptionResponse < Struct.new( :event_subscription) include Aws::Structure end # @note When making an API call, you may pass ModifyReplicationInstanceMessage # data as a hash: # # { # replication_instance_arn: "String", # required # allocated_storage: 1, # apply_immediately: false, # replication_instance_class: "String", # vpc_security_group_ids: ["String"], # preferred_maintenance_window: "String", # multi_az: false, # engine_version: "String", # allow_major_version_upgrade: false, # auto_minor_version_upgrade: false, # replication_instance_identifier: "String", # } # # @!attribute [rw] replication_instance_arn # The Amazon Resource Name (ARN) of the replication instance. # @return [String] # # @!attribute [rw] allocated_storage # The amount of storage (in gigabytes) to be allocated for the # replication instance. # @return [Integer] # # @!attribute [rw] apply_immediately # Indicates whether the changes should be applied immediately or # during the next maintenance window. # @return [Boolean] # # @!attribute [rw] replication_instance_class # The compute and memory capacity of the replication instance. # # Valid Values: `dms.t2.micro | dms.t2.small | dms.t2.medium | # dms.t2.large | dms.c4.large | dms.c4.xlarge | dms.c4.2xlarge | # dms.c4.4xlarge ` # @return [String] # # @!attribute [rw] vpc_security_group_ids # Specifies the VPC security group to be used with the replication # instance. The VPC security group must work with the VPC containing # the replication instance. # @return [Array] # # @!attribute [rw] preferred_maintenance_window # The weekly time range (in UTC) during which system maintenance can # occur, which might result in an outage. Changing this parameter does # not result in an outage, except in the following situation, and the # change is asynchronously applied as soon as possible. If moving this # window to the current time, there must be at least 30 minutes # between the current time and end of the window to ensure pending # changes are applied. # # Default: Uses existing setting # # Format: ddd:hh24:mi-ddd:hh24:mi # # Valid Days: Mon \| Tue \| Wed \| Thu \| Fri \| Sat \| Sun # # Constraints: Must be at least 30 minutes # @return [String] # # @!attribute [rw] multi_az # Specifies whether the replication instance is a Multi-AZ deployment. # You cannot set the `AvailabilityZone` parameter if the Multi-AZ # parameter is set to `true`. # @return [Boolean] # # @!attribute [rw] engine_version # The engine version number of the replication instance. # @return [String] # # @!attribute [rw] allow_major_version_upgrade # Indicates that major version upgrades are allowed. Changing this # parameter does not result in an outage, and the change is # asynchronously applied as soon as possible. # # This parameter must be set to `true` when specifying a value for the # `EngineVersion` parameter that is a different major version than the # replication instance's current version. # @return [Boolean] # # @!attribute [rw] auto_minor_version_upgrade # Indicates that minor version upgrades will be applied automatically # to the replication instance during the maintenance window. Changing # this parameter does not result in an outage except in the following # case and the change is asynchronously applied as soon as possible. # An outage will result if this parameter is set to `true` during the # maintenance window, and a newer minor version is available, and AWS # DMS has enabled auto patching for that engine version. # @return [Boolean] # # @!attribute [rw] replication_instance_identifier # The replication instance identifier. This parameter is stored as a # lowercase string. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/ModifyReplicationInstanceMessage AWS API Documentation # class ModifyReplicationInstanceMessage < Struct.new( :replication_instance_arn, :allocated_storage, :apply_immediately, :replication_instance_class, :vpc_security_group_ids, :preferred_maintenance_window, :multi_az, :engine_version, :allow_major_version_upgrade, :auto_minor_version_upgrade, :replication_instance_identifier) include Aws::Structure end # @!attribute [rw] replication_instance # The modified replication instance. # @return [Types::ReplicationInstance] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/ModifyReplicationInstanceResponse AWS API Documentation # class ModifyReplicationInstanceResponse < Struct.new( :replication_instance) include Aws::Structure end # @note When making an API call, you may pass ModifyReplicationSubnetGroupMessage # data as a hash: # # { # replication_subnet_group_identifier: "String", # required # replication_subnet_group_description: "String", # subnet_ids: ["String"], # required # } # # @!attribute [rw] replication_subnet_group_identifier # The name of the replication instance subnet group. # @return [String] # # @!attribute [rw] replication_subnet_group_description # A description for the replication instance subnet group. # @return [String] # # @!attribute [rw] subnet_ids # A list of subnet IDs. # @return [Array] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/ModifyReplicationSubnetGroupMessage AWS API Documentation # class ModifyReplicationSubnetGroupMessage < Struct.new( :replication_subnet_group_identifier, :replication_subnet_group_description, :subnet_ids) include Aws::Structure end # @!attribute [rw] replication_subnet_group # The modified replication subnet group. # @return [Types::ReplicationSubnetGroup] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/ModifyReplicationSubnetGroupResponse AWS API Documentation # class ModifyReplicationSubnetGroupResponse < Struct.new( :replication_subnet_group) include Aws::Structure end # @note When making an API call, you may pass ModifyReplicationTaskMessage # data as a hash: # # { # replication_task_arn: "String", # required # replication_task_identifier: "String", # migration_type: "full-load", # accepts full-load, cdc, full-load-and-cdc # table_mappings: "String", # replication_task_settings: "String", # cdc_start_time: Time.now, # cdc_start_position: "String", # cdc_stop_position: "String", # } # # @!attribute [rw] replication_task_arn # The Amazon Resource Name (ARN) of the replication task. # @return [String] # # @!attribute [rw] replication_task_identifier # The replication task identifier. # # Constraints: # # * Must contain from 1 to 255 alphanumeric characters or hyphens. # # * First character must be a letter. # # * Cannot end with a hyphen or contain two consecutive hyphens. # @return [String] # # @!attribute [rw] migration_type # The migration type. Valid values: `full-load` \| `cdc` \| # `full-load-and-cdc` # @return [String] # # @!attribute [rw] table_mappings # When using the AWS CLI or boto3, provide the path of the JSON file # that contains the table mappings. Precede the path with `file://`. # When working with the DMS API, provide the JSON as the parameter # value, for example: `--table-mappings file://mappingfile.json` # @return [String] # # @!attribute [rw] replication_task_settings # JSON file that contains settings for the task, such as target # metadata settings. # @return [String] # # @!attribute [rw] cdc_start_time # Indicates the start time for a change data capture (CDC) operation. # Use either CdcStartTime or CdcStartPosition to specify when you want # a CDC operation to start. Specifying both values results in an # error. # # Timestamp Example: --cdc-start-time “2018-03-08T12:12:12” # @return [Time] # # @!attribute [rw] cdc_start_position # Indicates when you want a change data capture (CDC) operation to # start. Use either CdcStartPosition or CdcStartTime to specify when # you want a CDC operation to start. Specifying both values results in # an error. # # The value can be in date, checkpoint, or LSN/SCN format. # # Date Example: --cdc-start-position “2018-03-08T12:12:12” # # Checkpoint Example: --cdc-start-position # "checkpoint:V1#27#mysql-bin-changelog.157832:1975:-1:2002:677883278264080:mysql-bin-changelog.157832:1876#0#0#*#0#93" # # LSN Example: --cdc-start-position “mysql-bin-changelog.000024:373” # @return [String] # # @!attribute [rw] cdc_stop_position # Indicates when you want a change data capture (CDC) operation to # stop. The value can be either server time or commit time. # # Server time example: --cdc-stop-position # “server\_time:3018-02-09T12:12:12” # # Commit time example: --cdc-stop-position “commit\_time: # 3018-02-09T12:12:12 “ # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/ModifyReplicationTaskMessage AWS API Documentation # class ModifyReplicationTaskMessage < Struct.new( :replication_task_arn, :replication_task_identifier, :migration_type, :table_mappings, :replication_task_settings, :cdc_start_time, :cdc_start_position, :cdc_stop_position) include Aws::Structure end # @!attribute [rw] replication_task # The replication task that was modified. # @return [Types::ReplicationTask] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/ModifyReplicationTaskResponse AWS API Documentation # class ModifyReplicationTaskResponse < Struct.new( :replication_task) include Aws::Structure end # @note When making an API call, you may pass MongoDbSettings # data as a hash: # # { # username: "String", # password: "SecretString", # server_name: "String", # port: 1, # database_name: "String", # auth_type: "no", # accepts no, password # auth_mechanism: "default", # accepts default, mongodb_cr, scram_sha_1 # nesting_level: "none", # accepts none, one # extract_doc_id: "String", # docs_to_investigate: "String", # auth_source: "String", # kms_key_id: "String", # } # # @!attribute [rw] username # The user name you use to access the MongoDB source endpoint. # @return [String] # # @!attribute [rw] password # The password for the user account you use to access the MongoDB # source endpoint. # @return [String] # # @!attribute [rw] server_name # The name of the server on the MongoDB source endpoint. # @return [String] # # @!attribute [rw] port # The port value for the MongoDB source endpoint. # @return [Integer] # # @!attribute [rw] database_name # The database name on the MongoDB source endpoint. # @return [String] # # @!attribute [rw] auth_type # The authentication type you use to access the MongoDB source # endpoint. # # Valid values: NO, PASSWORD # # When NO is selected, user name and password parameters are not used # and can be empty. # @return [String] # # @!attribute [rw] auth_mechanism # The authentication mechanism you use to access the MongoDB source # endpoint. # # Valid values: DEFAULT, MONGODB\_CR, SCRAM\_SHA\_1 # # DEFAULT – For MongoDB version 2.x, use MONGODB\_CR. For MongoDB # version 3.x, use SCRAM\_SHA\_1. This attribute is not used when # authType=No. # @return [String] # # @!attribute [rw] nesting_level # Specifies either document or table mode. # # Valid values: NONE, ONE # # Default value is NONE. Specify NONE to use document mode. Specify # ONE to use table mode. # @return [String] # # @!attribute [rw] extract_doc_id # Specifies the document ID. Use this attribute when `NestingLevel` is # set to NONE. # # Default value is false. # @return [String] # # @!attribute [rw] docs_to_investigate # Indicates the number of documents to preview to determine the # document organization. Use this attribute when `NestingLevel` is set # to ONE. # # Must be a positive value greater than 0. Default value is 1000. # @return [String] # # @!attribute [rw] auth_source # The MongoDB database name. This attribute is not used when # `authType=NO`. # # The default is admin. # @return [String] # # @!attribute [rw] kms_key_id # The AWS KMS key identifier that is used to encrypt the content on # the replication instance. If you don't specify a value for the # `KmsKeyId` parameter, then AWS DMS uses your default encryption key. # AWS KMS creates the default encryption key for your AWS account. # Your AWS account has a different default encryption key for each AWS # Region. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/MongoDbSettings AWS API Documentation # class MongoDbSettings < Struct.new( :username, :password, :server_name, :port, :database_name, :auth_type, :auth_mechanism, :nesting_level, :extract_doc_id, :docs_to_investigate, :auth_source, :kms_key_id) include Aws::Structure end # @!attribute [rw] engine_version # The version of the replication engine. # @return [String] # # @!attribute [rw] replication_instance_class # The compute and memory capacity of the replication instance. # # Valid Values: `dms.t2.micro | dms.t2.small | dms.t2.medium | # dms.t2.large | dms.c4.large | dms.c4.xlarge | dms.c4.2xlarge | # dms.c4.4xlarge ` # @return [String] # # @!attribute [rw] storage_type # The type of storage used by the replication instance. # @return [String] # # @!attribute [rw] min_allocated_storage # The minimum amount of storage (in gigabytes) that can be allocated # for the replication instance. # @return [Integer] # # @!attribute [rw] max_allocated_storage # The minimum amount of storage (in gigabytes) that can be allocated # for the replication instance. # @return [Integer] # # @!attribute [rw] default_allocated_storage # The default amount of storage (in gigabytes) that is allocated for # the replication instance. # @return [Integer] # # @!attribute [rw] included_allocated_storage # The amount of storage (in gigabytes) that is allocated for the # replication instance. # @return [Integer] # # @!attribute [rw] availability_zones # List of Availability Zones for this replication instance. # @return [Array] # # @!attribute [rw] release_status # The value returned when the specified `EngineVersion` of the # replication instance is in Beta or test mode. This indicates some # features might not work as expected. # # AWS DMS supports `ReleaseStatus` in versions 3.1.4 and later. # # # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/OrderableReplicationInstance AWS API Documentation # class OrderableReplicationInstance < Struct.new( :engine_version, :replication_instance_class, :storage_type, :min_allocated_storage, :max_allocated_storage, :default_allocated_storage, :included_allocated_storage, :availability_zones, :release_status) include Aws::Structure end # @!attribute [rw] action # The type of pending maintenance action that is available for the # resource. # @return [String] # # @!attribute [rw] auto_applied_after_date # The date of the maintenance window when the action will be applied. # The maintenance action will be applied to the resource during its # first maintenance window after this date. If this date is specified, # any `next-maintenance` opt-in requests are ignored. # @return [Time] # # @!attribute [rw] forced_apply_date # The date when the maintenance action will be automatically applied. # The maintenance action will be applied to the resource on this date # regardless of the maintenance window for the resource. If this date # is specified, any `immediate` opt-in requests are ignored. # @return [Time] # # @!attribute [rw] opt_in_status # Indicates the type of opt-in request that has been received for the # resource. # @return [String] # # @!attribute [rw] current_apply_date # The effective date when the pending maintenance action will be # applied to the resource. This date takes into account opt-in # requests received from the `ApplyPendingMaintenanceAction` API, the # `AutoAppliedAfterDate`, and the `ForcedApplyDate`. This value is # blank if an opt-in request has not been received and nothing has # been specified as `AutoAppliedAfterDate` or `ForcedApplyDate`. # @return [Time] # # @!attribute [rw] description # A description providing more detail about the maintenance action. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/PendingMaintenanceAction AWS API Documentation # class PendingMaintenanceAction < Struct.new( :action, :auto_applied_after_date, :forced_apply_date, :opt_in_status, :current_apply_date, :description) include Aws::Structure end # @note When making an API call, you may pass RebootReplicationInstanceMessage # data as a hash: # # { # replication_instance_arn: "String", # required # force_failover: false, # } # # @!attribute [rw] replication_instance_arn # The Amazon Resource Name (ARN) of the replication instance. # @return [String] # # @!attribute [rw] force_failover # If this parameter is `true`, the reboot is conducted through a # Multi-AZ failover. (If the instance isn't configured for Multi-AZ, # then you can't specify `true`.) # @return [Boolean] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/RebootReplicationInstanceMessage AWS API Documentation # class RebootReplicationInstanceMessage < Struct.new( :replication_instance_arn, :force_failover) include Aws::Structure end # @!attribute [rw] replication_instance # The replication instance that is being rebooted. # @return [Types::ReplicationInstance] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/RebootReplicationInstanceResponse AWS API Documentation # class RebootReplicationInstanceResponse < Struct.new( :replication_instance) include Aws::Structure end # @note When making an API call, you may pass RedshiftSettings # data as a hash: # # { # accept_any_date: false, # after_connect_script: "String", # bucket_folder: "String", # bucket_name: "String", # connection_timeout: 1, # database_name: "String", # date_format: "String", # empty_as_null: false, # encryption_mode: "sse-s3", # accepts sse-s3, sse-kms # file_transfer_upload_streams: 1, # load_timeout: 1, # max_file_size: 1, # password: "SecretString", # port: 1, # remove_quotes: false, # replace_invalid_chars: "String", # replace_chars: "String", # server_name: "String", # service_access_role_arn: "String", # server_side_encryption_kms_key_id: "String", # time_format: "String", # trim_blanks: false, # truncate_columns: false, # username: "String", # write_buffer_size: 1, # } # # @!attribute [rw] accept_any_date # A value that indicates to allow any date format, including invalid # formats such as 00/00/00 00:00:00, to be loaded without generating # an error. You can choose `true` or `false` (the default). # # This parameter applies only to TIMESTAMP and DATE columns. Always # use ACCEPTANYDATE with the DATEFORMAT parameter. If the date format # for the data doesn't match the DATEFORMAT specification, Amazon # Redshift inserts a NULL value into that field. # @return [Boolean] # # @!attribute [rw] after_connect_script # Code to run after connecting. This parameter should contain the code # itself, not the name of a file containing the code. # @return [String] # # @!attribute [rw] bucket_folder # The location where the comma-separated value (.csv) files are stored # before being uploaded to the S3 bucket. # @return [String] # # @!attribute [rw] bucket_name # The name of the S3 bucket you want to use # @return [String] # # @!attribute [rw] connection_timeout # A value that sets the amount of time to wait (in milliseconds) # before timing out, beginning from when you initially establish a # connection. # @return [Integer] # # @!attribute [rw] database_name # The name of the Amazon Redshift data warehouse (service) that you # are working with. # @return [String] # # @!attribute [rw] date_format # The date format that you are using. Valid values are `auto` # (case-sensitive), your date format string enclosed in quotes, or # NULL. If this parameter is left unset (NULL), it defaults to a # format of 'YYYY-MM-DD'. Using `auto` recognizes most strings, even # some that aren't supported when you use a date format string. # # If your date and time values use formats different from each other, # set this to `auto`. # @return [String] # # @!attribute [rw] empty_as_null # A value that specifies whether AWS DMS should migrate empty CHAR and # VARCHAR fields as NULL. A value of `true` sets empty CHAR and # VARCHAR fields to null. The default is `false`. # @return [Boolean] # # @!attribute [rw] encryption_mode # The type of server-side encryption that you want to use for your # data. This encryption type is part of the endpoint settings or the # extra connections attributes for Amazon S3. You can choose either # `SSE_S3` (the default) or `SSE_KMS`. To use `SSE_S3`, create an AWS # Identity and Access Management (IAM) role with a policy that allows # `"arn:aws:s3:::*"` to use the following actions: `"s3:PutObject", # "s3:ListBucket"` # @return [String] # # @!attribute [rw] file_transfer_upload_streams # The number of threads used to upload a single file. This parameter # accepts a value from 1 through 64. It defaults to 10. # @return [Integer] # # @!attribute [rw] load_timeout # The amount of time to wait (in milliseconds) before timing out, # beginning from when you begin loading. # @return [Integer] # # @!attribute [rw] max_file_size # The maximum size (in KB) of any .csv file used to transfer data to # Amazon Redshift. This accepts a value from 1 through 1,048,576. It # defaults to 32,768 KB (32 MB). # @return [Integer] # # @!attribute [rw] password # The password for the user named in the `username` property. # @return [String] # # @!attribute [rw] port # The port number for Amazon Redshift. The default value is 5439. # @return [Integer] # # @!attribute [rw] remove_quotes # A value that specifies to remove surrounding quotation marks from # strings in the incoming data. All characters within the quotation # marks, including delimiters, are retained. Choose `true` to remove # quotation marks. The default is `false`. # @return [Boolean] # # @!attribute [rw] replace_invalid_chars # A list of characters that you want to replace. Use with # `ReplaceChars`. # @return [String] # # @!attribute [rw] replace_chars # A value that specifies to replaces the invalid characters specified # in `ReplaceInvalidChars`, substituting the specified characters # instead. The default is `"?"`. # @return [String] # # @!attribute [rw] server_name # The name of the Amazon Redshift cluster you are using. # @return [String] # # @!attribute [rw] service_access_role_arn # The Amazon Resource Name (ARN) of the IAM role that has access to # the Amazon Redshift service. # @return [String] # # @!attribute [rw] server_side_encryption_kms_key_id # The AWS KMS key ID. If you are using `SSE_KMS` for the # `EncryptionMode`, provide this key ID. The key that you use needs an # attached policy that enables IAM user permissions and allows use of # the key. # @return [String] # # @!attribute [rw] time_format # The time format that you want to use. Valid values are `auto` # (case-sensitive), `'timeformat_string'`, `'epochsecs'`, or # `'epochmillisecs'`. It defaults to 10. Using `auto` recognizes most # strings, even some that aren't supported when you use a time format # string. # # If your date and time values use formats different from each other, # set this parameter to `auto`. # @return [String] # # @!attribute [rw] trim_blanks # A value that specifies to remove the trailing white space characters # from a VARCHAR string. This parameter applies only to columns with a # VARCHAR data type. Choose `true` to remove unneeded white space. The # default is `false`. # @return [Boolean] # # @!attribute [rw] truncate_columns # A value that specifies to truncate data in columns to the # appropriate number of characters, so that the data fits in the # column. This parameter applies only to columns with a VARCHAR or # CHAR data type, and rows with a size of 4 MB or less. Choose `true` # to truncate data. The default is `false`. # @return [Boolean] # # @!attribute [rw] username # An Amazon Redshift user name for a registered user. # @return [String] # # @!attribute [rw] write_buffer_size # The size of the write buffer to use in rows. Valid values range from # 1 through 2,048. The default is 1,024. Use this setting to tune # performance. # @return [Integer] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/RedshiftSettings AWS API Documentation # class RedshiftSettings < Struct.new( :accept_any_date, :after_connect_script, :bucket_folder, :bucket_name, :connection_timeout, :database_name, :date_format, :empty_as_null, :encryption_mode, :file_transfer_upload_streams, :load_timeout, :max_file_size, :password, :port, :remove_quotes, :replace_invalid_chars, :replace_chars, :server_name, :service_access_role_arn, :server_side_encryption_kms_key_id, :time_format, :trim_blanks, :truncate_columns, :username, :write_buffer_size) include Aws::Structure end # @note When making an API call, you may pass RefreshSchemasMessage # data as a hash: # # { # endpoint_arn: "String", # required # replication_instance_arn: "String", # required # } # # @!attribute [rw] endpoint_arn # The Amazon Resource Name (ARN) string that uniquely identifies the # endpoint. # @return [String] # # @!attribute [rw] replication_instance_arn # The Amazon Resource Name (ARN) of the replication instance. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/RefreshSchemasMessage AWS API Documentation # class RefreshSchemasMessage < Struct.new( :endpoint_arn, :replication_instance_arn) include Aws::Structure end # @!attribute [rw] refresh_schemas_status # The status of the refreshed schema. # @return [Types::RefreshSchemasStatus] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/RefreshSchemasResponse AWS API Documentation # class RefreshSchemasResponse < Struct.new( :refresh_schemas_status) include Aws::Structure end # @!attribute [rw] endpoint_arn # The Amazon Resource Name (ARN) string that uniquely identifies the # endpoint. # @return [String] # # @!attribute [rw] replication_instance_arn # The Amazon Resource Name (ARN) of the replication instance. # @return [String] # # @!attribute [rw] status # The status of the schema. # @return [String] # # @!attribute [rw] last_refresh_date # The date the schema was last refreshed. # @return [Time] # # @!attribute [rw] last_failure_message # The last failure message for the schema. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/RefreshSchemasStatus AWS API Documentation # class RefreshSchemasStatus < Struct.new( :endpoint_arn, :replication_instance_arn, :status, :last_refresh_date, :last_failure_message) include Aws::Structure end # @note When making an API call, you may pass ReloadTablesMessage # data as a hash: # # { # replication_task_arn: "String", # required # tables_to_reload: [ # required # { # schema_name: "String", # table_name: "String", # }, # ], # reload_option: "data-reload", # accepts data-reload, validate-only # } # # @!attribute [rw] replication_task_arn # The Amazon Resource Name (ARN) of the replication task. # @return [String] # # @!attribute [rw] tables_to_reload # The name and schema of the table to be reloaded. # @return [Array] # # @!attribute [rw] reload_option # Options for reload. Specify `data-reload` to reload the data and # re-validate it if validation is enabled. Specify `validate-only` to # re-validate the table. This option applies only when validation is # enabled for the task. # # Valid values: data-reload, validate-only # # Default value is data-reload. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/ReloadTablesMessage AWS API Documentation # class ReloadTablesMessage < Struct.new( :replication_task_arn, :tables_to_reload, :reload_option) include Aws::Structure end # @!attribute [rw] replication_task_arn # The Amazon Resource Name (ARN) of the replication task. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/ReloadTablesResponse AWS API Documentation # class ReloadTablesResponse < Struct.new( :replication_task_arn) include Aws::Structure end # Removes one or more tags from an AWS DMS resource. # # @note When making an API call, you may pass RemoveTagsFromResourceMessage # data as a hash: # # { # resource_arn: "String", # required # tag_keys: ["String"], # required # } # # @!attribute [rw] resource_arn # An AWS DMS resource from which you want to remove tag(s). The value # for this parameter is an Amazon Resource Name (ARN). # @return [String] # # @!attribute [rw] tag_keys # The tag key (name) of the tag to be removed. # @return [Array] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/RemoveTagsFromResourceMessage AWS API Documentation # class RemoveTagsFromResourceMessage < Struct.new( :resource_arn, :tag_keys) include Aws::Structure end # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/RemoveTagsFromResourceResponse AWS API Documentation # class RemoveTagsFromResourceResponse < Aws::EmptyStructure; end # @!attribute [rw] replication_instance_identifier # The replication instance identifier. This parameter is stored as a # lowercase string. # # Constraints: # # * Must contain from 1 to 63 alphanumeric characters or hyphens. # # * First character must be a letter. # # * Cannot end with a hyphen or contain two consecutive hyphens. # # Example: `myrepinstance` # @return [String] # # @!attribute [rw] replication_instance_class # The compute and memory capacity of the replication instance. # # Valid Values: `dms.t2.micro | dms.t2.small | dms.t2.medium | # dms.t2.large | dms.c4.large | dms.c4.xlarge | dms.c4.2xlarge | # dms.c4.4xlarge ` # @return [String] # # @!attribute [rw] replication_instance_status # The status of the replication instance. # @return [String] # # @!attribute [rw] allocated_storage # The amount of storage (in gigabytes) that is allocated for the # replication instance. # @return [Integer] # # @!attribute [rw] instance_create_time # The time the replication instance was created. # @return [Time] # # @!attribute [rw] vpc_security_groups # The VPC security group for the instance. # @return [Array] # # @!attribute [rw] availability_zone # The Availability Zone for the instance. # @return [String] # # @!attribute [rw] replication_subnet_group # The subnet group for the replication instance. # @return [Types::ReplicationSubnetGroup] # # @!attribute [rw] preferred_maintenance_window # The maintenance window times for the replication instance. # @return [String] # # @!attribute [rw] pending_modified_values # The pending modification values. # @return [Types::ReplicationPendingModifiedValues] # # @!attribute [rw] multi_az # Specifies whether the replication instance is a Multi-AZ deployment. # You cannot set the `AvailabilityZone` parameter if the Multi-AZ # parameter is set to `true`. # @return [Boolean] # # @!attribute [rw] engine_version # The engine version number of the replication instance. # @return [String] # # @!attribute [rw] auto_minor_version_upgrade # Boolean value indicating if minor version upgrades will be # automatically applied to the instance. # @return [Boolean] # # @!attribute [rw] kms_key_id # An AWS KMS key identifier that is used to encrypt the data on the # replication instance. # # If you don't specify a value for the `KmsKeyId` parameter, then AWS # DMS uses your default encryption key. # # AWS KMS creates the default encryption key for your AWS account. # Your AWS account has a different default encryption key for each AWS # Region. # @return [String] # # @!attribute [rw] replication_instance_arn # The Amazon Resource Name (ARN) of the replication instance. # @return [String] # # @!attribute [rw] replication_instance_public_ip_address # The public IP address of the replication instance. # @return [String] # # @!attribute [rw] replication_instance_private_ip_address # The private IP address of the replication instance. # @return [String] # # @!attribute [rw] replication_instance_public_ip_addresses # One or more public IP addresses for the replication instance. # @return [Array] # # @!attribute [rw] replication_instance_private_ip_addresses # One or more private IP addresses for the replication instance. # @return [Array] # # @!attribute [rw] publicly_accessible # Specifies the accessibility options for the replication instance. A # value of `true` represents an instance with a public IP address. A # value of `false` represents an instance with a private IP address. # The default value is `true`. # @return [Boolean] # # @!attribute [rw] secondary_availability_zone # The availability zone of the standby replication instance in a # Multi-AZ deployment. # @return [String] # # @!attribute [rw] free_until # The expiration date of the free replication instance that is part of # the Free DMS program. # @return [Time] # # @!attribute [rw] dns_name_servers # The DNS name servers for the replication instance. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/ReplicationInstance AWS API Documentation # class ReplicationInstance < Struct.new( :replication_instance_identifier, :replication_instance_class, :replication_instance_status, :allocated_storage, :instance_create_time, :vpc_security_groups, :availability_zone, :replication_subnet_group, :preferred_maintenance_window, :pending_modified_values, :multi_az, :engine_version, :auto_minor_version_upgrade, :kms_key_id, :replication_instance_arn, :replication_instance_public_ip_address, :replication_instance_private_ip_address, :replication_instance_public_ip_addresses, :replication_instance_private_ip_addresses, :publicly_accessible, :secondary_availability_zone, :free_until, :dns_name_servers) include Aws::Structure end # Contains metadata for a replication instance task log. # # @!attribute [rw] replication_task_name # The name of the replication task. # @return [String] # # @!attribute [rw] replication_task_arn # The Amazon Resource Name (ARN) of the replication task. # @return [String] # # @!attribute [rw] replication_instance_task_log_size # The size, in bytes, of the replication task log. # @return [Integer] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/ReplicationInstanceTaskLog AWS API Documentation # class ReplicationInstanceTaskLog < Struct.new( :replication_task_name, :replication_task_arn, :replication_instance_task_log_size) include Aws::Structure end # @!attribute [rw] replication_instance_class # The compute and memory capacity of the replication instance. # # Valid Values: `dms.t2.micro | dms.t2.small | dms.t2.medium | # dms.t2.large | dms.c4.large | dms.c4.xlarge | dms.c4.2xlarge | # dms.c4.4xlarge ` # @return [String] # # @!attribute [rw] allocated_storage # The amount of storage (in gigabytes) that is allocated for the # replication instance. # @return [Integer] # # @!attribute [rw] multi_az # Specifies whether the replication instance is a Multi-AZ deployment. # You cannot set the `AvailabilityZone` parameter if the Multi-AZ # parameter is set to `true`. # @return [Boolean] # # @!attribute [rw] engine_version # The engine version number of the replication instance. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/ReplicationPendingModifiedValues AWS API Documentation # class ReplicationPendingModifiedValues < Struct.new( :replication_instance_class, :allocated_storage, :multi_az, :engine_version) include Aws::Structure end # @!attribute [rw] replication_subnet_group_identifier # The identifier of the replication instance subnet group. # @return [String] # # @!attribute [rw] replication_subnet_group_description # A description for the replication subnet group. # @return [String] # # @!attribute [rw] vpc_id # The ID of the VPC. # @return [String] # # @!attribute [rw] subnet_group_status # The status of the subnet group. # @return [String] # # @!attribute [rw] subnets # The subnets that are in the subnet group. # @return [Array] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/ReplicationSubnetGroup AWS API Documentation # class ReplicationSubnetGroup < Struct.new( :replication_subnet_group_identifier, :replication_subnet_group_description, :vpc_id, :subnet_group_status, :subnets) include Aws::Structure end # The replication subnet group does not cover enough Availability Zones # (AZs). Edit the replication subnet group and add more AZs. # # @!attribute [rw] message # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/ReplicationSubnetGroupDoesNotCoverEnoughAZs AWS API Documentation # class ReplicationSubnetGroupDoesNotCoverEnoughAZs < Struct.new( :message) include Aws::Structure end # @!attribute [rw] replication_task_identifier # The user-assigned replication task identifier or name. # # Constraints: # # * Must contain from 1 to 255 alphanumeric characters or hyphens. # # * First character must be a letter. # # * Cannot end with a hyphen or contain two consecutive hyphens. # @return [String] # # @!attribute [rw] source_endpoint_arn # The Amazon Resource Name (ARN) string that uniquely identifies the # endpoint. # @return [String] # # @!attribute [rw] target_endpoint_arn # The Amazon Resource Name (ARN) string that uniquely identifies the # endpoint. # @return [String] # # @!attribute [rw] replication_instance_arn # The Amazon Resource Name (ARN) of the replication instance. # @return [String] # # @!attribute [rw] migration_type # The type of migration. # @return [String] # # @!attribute [rw] table_mappings # Table mappings specified in the task. # @return [String] # # @!attribute [rw] replication_task_settings # The settings for the replication task. # @return [String] # # @!attribute [rw] status # The status of the replication task. # @return [String] # # @!attribute [rw] last_failure_message # The last error (failure) message generated for the replication # instance. # @return [String] # # @!attribute [rw] stop_reason # The reason the replication task was stopped. # @return [String] # # @!attribute [rw] replication_task_creation_date # The date the replication task was created. # @return [Time] # # @!attribute [rw] replication_task_start_date # The date the replication task is scheduled to start. # @return [Time] # # @!attribute [rw] cdc_start_position # Indicates when you want a change data capture (CDC) operation to # start. Use either `CdcStartPosition` or `CdcStartTime` to specify # when you want the CDC operation to start. Specifying both values # results in an error. # # The value can be in date, checkpoint, or LSN/SCN format. # # Date Example: --cdc-start-position “2018-03-08T12:12:12” # # Checkpoint Example: --cdc-start-position # "checkpoint:V1#27#mysql-bin-changelog.157832:1975:-1:2002:677883278264080:mysql-bin-changelog.157832:1876#0#0#*#0#93" # # LSN Example: --cdc-start-position “mysql-bin-changelog.000024:373” # @return [String] # # @!attribute [rw] cdc_stop_position # Indicates when you want a change data capture (CDC) operation to # stop. The value can be either server time or commit time. # # Server time example: --cdc-stop-position # “server\_time:3018-02-09T12:12:12” # # Commit time example: --cdc-stop-position “commit\_time: # 3018-02-09T12:12:12 “ # @return [String] # # @!attribute [rw] recovery_checkpoint # Indicates the last checkpoint that occurred during a change data # capture (CDC) operation. You can provide this value to the # `CdcStartPosition` parameter to start a CDC operation that begins at # that checkpoint. # @return [String] # # @!attribute [rw] replication_task_arn # The Amazon Resource Name (ARN) of the replication task. # @return [String] # # @!attribute [rw] replication_task_stats # The statistics for the task, including elapsed time, tables loaded, # and table errors. # @return [Types::ReplicationTaskStats] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/ReplicationTask AWS API Documentation # class ReplicationTask < Struct.new( :replication_task_identifier, :source_endpoint_arn, :target_endpoint_arn, :replication_instance_arn, :migration_type, :table_mappings, :replication_task_settings, :status, :last_failure_message, :stop_reason, :replication_task_creation_date, :replication_task_start_date, :cdc_start_position, :cdc_stop_position, :recovery_checkpoint, :replication_task_arn, :replication_task_stats) include Aws::Structure end # The task assessment report in JSON format. # # @!attribute [rw] replication_task_identifier # The replication task identifier of the task on which the task # assessment was run. # @return [String] # # @!attribute [rw] replication_task_arn # The Amazon Resource Name (ARN) of the replication task. # @return [String] # # @!attribute [rw] replication_task_last_assessment_date # The date the task assessment was completed. # @return [Time] # # @!attribute [rw] assessment_status # The status of the task assessment. # @return [String] # # @!attribute [rw] assessment_results_file # The file containing the results of the task assessment. # @return [String] # # @!attribute [rw] assessment_results # The task assessment results in JSON format. # @return [String] # # @!attribute [rw] s3_object_url # The URL of the S3 object containing the task assessment results. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/ReplicationTaskAssessmentResult AWS API Documentation # class ReplicationTaskAssessmentResult < Struct.new( :replication_task_identifier, :replication_task_arn, :replication_task_last_assessment_date, :assessment_status, :assessment_results_file, :assessment_results, :s3_object_url) include Aws::Structure end # @!attribute [rw] full_load_progress_percent # The percent complete for the full load migration task. # @return [Integer] # # @!attribute [rw] elapsed_time_millis # The elapsed time of the task, in milliseconds. # @return [Integer] # # @!attribute [rw] tables_loaded # The number of tables loaded for this task. # @return [Integer] # # @!attribute [rw] tables_loading # The number of tables currently loading for this task. # @return [Integer] # # @!attribute [rw] tables_queued # The number of tables queued for this task. # @return [Integer] # # @!attribute [rw] tables_errored # The number of errors that have occurred during this task. # @return [Integer] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/ReplicationTaskStats AWS API Documentation # class ReplicationTaskStats < Struct.new( :full_load_progress_percent, :elapsed_time_millis, :tables_loaded, :tables_loading, :tables_queued, :tables_errored) include Aws::Structure end # The resource you are attempting to create already exists. # # @!attribute [rw] message # @return [String] # # @!attribute [rw] resource_arn # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/ResourceAlreadyExistsFault AWS API Documentation # class ResourceAlreadyExistsFault < Struct.new( :message, :resource_arn) include Aws::Structure end # The resource could not be found. # # @!attribute [rw] message # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/ResourceNotFoundFault AWS API Documentation # class ResourceNotFoundFault < Struct.new( :message) include Aws::Structure end # @!attribute [rw] resource_identifier # The Amazon Resource Name (ARN) of the DMS resource that the pending # maintenance action applies to. For information about creating an # ARN, see [ Constructing an Amazon Resource Name (ARN) for AWS # DMS][1] in the DMS documentation. # # # # [1]: https://docs.aws.amazon.com/dms/latest/userguide/CHAP_Introduction.AWS.ARN.html # @return [String] # # @!attribute [rw] pending_maintenance_action_details # Detailed information about the pending maintenance action. # @return [Array] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/ResourcePendingMaintenanceActions AWS API Documentation # class ResourcePendingMaintenanceActions < Struct.new( :resource_identifier, :pending_maintenance_action_details) include Aws::Structure end # The quota for this resource quota has been exceeded. # # @!attribute [rw] message # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/ResourceQuotaExceededFault AWS API Documentation # class ResourceQuotaExceededFault < Struct.new( :message) include Aws::Structure end # Settings for exporting data to Amazon S3. # # @note When making an API call, you may pass S3Settings # data as a hash: # # { # service_access_role_arn: "String", # external_table_definition: "String", # csv_row_delimiter: "String", # csv_delimiter: "String", # bucket_folder: "String", # bucket_name: "String", # compression_type: "none", # accepts none, gzip # encryption_mode: "sse-s3", # accepts sse-s3, sse-kms # server_side_encryption_kms_key_id: "String", # data_format: "csv", # accepts csv, parquet # encoding_type: "plain", # accepts plain, plain-dictionary, rle-dictionary # dict_page_size_limit: 1, # row_group_length: 1, # data_page_size: 1, # parquet_version: "parquet-1-0", # accepts parquet-1-0, parquet-2-0 # enable_statistics: false, # include_op_for_full_load: false, # cdc_inserts_only: false, # timestamp_column_name: "String", # } # # @!attribute [rw] service_access_role_arn # The Amazon Resource Name (ARN) used by the service access IAM role. # @return [String] # # @!attribute [rw] external_table_definition # The external table definition. # @return [String] # # @!attribute [rw] csv_row_delimiter # The delimiter used to separate rows in the source files. The default # is a carriage return (`\n`). # @return [String] # # @!attribute [rw] csv_delimiter # The delimiter used to separate columns in the source files. The # default is a comma. # @return [String] # # @!attribute [rw] bucket_folder # An optional parameter to set a folder name in the S3 bucket. If # provided, tables are created in the path ` # bucketFolder/schema_name/table_name/`. If this parameter is not # specified, then the path used is ` schema_name/table_name/`. # @return [String] # # @!attribute [rw] bucket_name # The name of the S3 bucket. # @return [String] # # @!attribute [rw] compression_type # An optional parameter to use GZIP to compress the target files. Set # to GZIP to compress the target files. Set to NONE (the default) or # do not use to leave the files uncompressed. Applies to both .csv and # .parquet file formats. # @return [String] # # @!attribute [rw] encryption_mode # The type of server-side encryption that you want to use for your # data. This encryption type is part of the endpoint settings or the # extra connections attributes for Amazon S3. You can choose either # `SSE_S3` (the default) or `SSE_KMS`. To use `SSE_S3`, you need an # AWS Identity and Access Management (IAM) role with permission to # allow `"arn:aws:s3:::dms-*"` to use the following actions: # # * `s3:CreateBucket` # # * `s3:ListBucket` # # * `s3:DeleteBucket` # # * `s3:GetBucketLocation` # # * `s3:GetObject` # # * `s3:PutObject` # # * `s3:DeleteObject` # # * `s3:GetObjectVersion` # # * `s3:GetBucketPolicy` # # * `s3:PutBucketPolicy` # # * `s3:DeleteBucketPolicy` # @return [String] # # @!attribute [rw] server_side_encryption_kms_key_id # If you are using `SSE_KMS` for the `EncryptionMode`, provide the AWS # KMS key ID. The key that you use needs an attached policy that # enables AWS Identity and Access Management (IAM) user permissions # and allows use of the key. # # Here is a CLI example: `aws dms create-endpoint # --endpoint-identifier value --endpoint-type target --engine-name s3 # --s3-settings # ServiceAccessRoleArn=value,BucketFolder=value,BucketName=value,EncryptionMode=SSE_KMS,ServerSideEncryptionKmsKeyId=value # ` # @return [String] # # @!attribute [rw] data_format # The format of the data that you want to use for output. You can # choose one of the following: # # * `csv`\: This is a row-based file format with comma-separated # values (.csv). # # * `parquet`\: Apache Parquet (.parquet) is a columnar storage file # format that features efficient compression and provides faster # query response. # @return [String] # # @!attribute [rw] encoding_type # The type of encoding you are using: # # * `RLE_DICTIONARY` uses a combination of bit-packing and run-length # encoding to store repeated values more efficiently. This is the # default. # # * `PLAIN` doesn't use encoding at all. Values are stored as they # are. # # * `PLAIN_DICTIONARY` builds a dictionary of the values encountered # in a given column. The dictionary is stored in a dictionary page # for each column chunk. # @return [String] # # @!attribute [rw] dict_page_size_limit # The maximum size of an encoded dictionary page of a column. If the # dictionary page exceeds this, this column is stored using an # encoding type of `PLAIN`. This parameter defaults to 1024 * 1024 # bytes (1 MiB), the maximum size of a dictionary page before it # reverts to `PLAIN` encoding. This size is used for .parquet file # format only. # @return [Integer] # # @!attribute [rw] row_group_length # The number of rows in a row group. A smaller row group size provides # faster reads. But as the number of row groups grows, the slower # writes become. This parameter defaults to 10,000 rows. This number # is used for .parquet file format only. # # If you choose a value larger than the maximum, `RowGroupLength` is # set to the max row group length in bytes (64 * 1024 * 1024). # @return [Integer] # # @!attribute [rw] data_page_size # The size of one data page in bytes. This parameter defaults to 1024 # * 1024 bytes (1 MiB). This number is used for .parquet file format # only. # @return [Integer] # # @!attribute [rw] parquet_version # The version of the Apache Parquet format that you want to use: # `parquet_1_0` (the default) or `parquet_2_0`. # @return [String] # # @!attribute [rw] enable_statistics # A value that enables statistics for Parquet pages and row groups. # Choose `true` to enable statistics, `false` to disable. Statistics # include `NULL`, `DISTINCT`, `MAX`, and `MIN` values. This parameter # defaults to `true`. This value is used for .parquet file format # only. # @return [Boolean] # # @!attribute [rw] include_op_for_full_load # A value that enables a full load to write INSERT operations to the # comma-separated value (.csv) output files only to indicate how the # rows were added to the source database. # # AWS DMS supports `IncludeOpForFullLoad` in versions 3.1.4 and later. # # # # For full load, records can only be inserted. By default (the `false` # setting), no information is recorded in these output files for a # full load to indicate that the rows were inserted at the source # database. If `IncludeOpForFullLoad` is set to `true` or `y`, the # INSERT is recorded as an I annotation in the first field of the .csv # file. This allows the format of your target records from a full load # to be consistent with the target records from a CDC load. # # This setting works together with `CdcInsertsOnly` for output to .csv # files only. For more information about how these settings work # together, see [Indicating Source DB Operations in Migrated S3 # Data][1] in the *AWS Database Migration Service User Guide.*. # # # # # # [1]: https://docs.aws.amazon.com/dms/latest/userguide/CHAP_Target.S3.html#CHAP_Target.S3.Configuring.InsertOps # @return [Boolean] # # @!attribute [rw] cdc_inserts_only # A value that enables a change data capture (CDC) load to write only # INSERT operations to .csv or columnar storage (.parquet) output # files. By default (the `false` setting), the first field in a .csv # or .parquet record contains the letter I (INSERT), U (UPDATE), or D # (DELETE). These values indicate whether the row was inserted, # updated, or deleted at the source database for a CDC load to the # target. # # If `cdcInsertsOnly` is set to `true` or `y`, only INSERTs from the # source database are migrated to the .csv or .parquet file. For .csv # format only, how these INSERTs are recorded depends on the value of # `IncludeOpForFullLoad`. If `IncludeOpForFullLoad` is set to `true`, # the first field of every CDC record is set to I to indicate the # INSERT operation at the source. If `IncludeOpForFullLoad` is set to # `false`, every CDC record is written without a first field to # indicate the INSERT operation at the source. For more information # about how these settings work together, see [Indicating Source DB # Operations in Migrated S3 Data][1] in the *AWS Database Migration # Service User Guide.*. # # AWS DMS supports this interaction between `CdcInsertsOnly` and # `IncludeOpForFullLoad` in versions 3.1.4 and later. # # # # # # [1]: https://docs.aws.amazon.com/dms/latest/userguide/CHAP_Target.S3.html#CHAP_Target.S3.Configuring.InsertOps # @return [Boolean] # # @!attribute [rw] timestamp_column_name # A value that includes a timestamp column in the Amazon S3 target # endpoint data. AWS DMS includes an additional column in the migrated # data when you set `timestampColumnName` to a non-blank value. # # AWS DMS supports `TimestampColumnName` in versions 3.1.4 and later. # # # # For a full load, each row of the timestamp column contains a # timestamp for when the data was transferred from the source to the # target by DMS. For a CDC load, each row of the timestamp column # contains the timestamp for the commit of that row in the source # database. The format for the timestamp column value is `yyyy-MM-dd # HH:mm:ss.SSSSSS`. For CDC, the microsecond precision depends on the # commit timestamp supported by DMS for the source database. When the # `AddColumnName` setting is set to `true`, DMS also includes the name # for the timestamp column that you set as the nonblank value of # `timestampColumnName`. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/S3Settings AWS API Documentation # class S3Settings < Struct.new( :service_access_role_arn, :external_table_definition, :csv_row_delimiter, :csv_delimiter, :bucket_folder, :bucket_name, :compression_type, :encryption_mode, :server_side_encryption_kms_key_id, :data_format, :encoding_type, :dict_page_size_limit, :row_group_length, :data_page_size, :parquet_version, :enable_statistics, :include_op_for_full_load, :cdc_inserts_only, :timestamp_column_name) include Aws::Structure end # The SNS topic is invalid. # # @!attribute [rw] message # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/SNSInvalidTopicFault AWS API Documentation # class SNSInvalidTopicFault < Struct.new( :message) include Aws::Structure end # You are not authorized for the SNS subscription. # # @!attribute [rw] message # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/SNSNoAuthorizationFault AWS API Documentation # class SNSNoAuthorizationFault < Struct.new( :message) include Aws::Structure end # @note When making an API call, you may pass StartReplicationTaskAssessmentMessage # data as a hash: # # { # replication_task_arn: "String", # required # } # # @!attribute [rw] replication_task_arn # The Amazon Resource Name (ARN) of the replication task. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/StartReplicationTaskAssessmentMessage AWS API Documentation # class StartReplicationTaskAssessmentMessage < Struct.new( :replication_task_arn) include Aws::Structure end # @!attribute [rw] replication_task # The assessed replication task. # @return [Types::ReplicationTask] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/StartReplicationTaskAssessmentResponse AWS API Documentation # class StartReplicationTaskAssessmentResponse < Struct.new( :replication_task) include Aws::Structure end # @note When making an API call, you may pass StartReplicationTaskMessage # data as a hash: # # { # replication_task_arn: "String", # required # start_replication_task_type: "start-replication", # required, accepts start-replication, resume-processing, reload-target # cdc_start_time: Time.now, # cdc_start_position: "String", # cdc_stop_position: "String", # } # # @!attribute [rw] replication_task_arn # The Amazon Resource Name (ARN) of the replication task to be # started. # @return [String] # # @!attribute [rw] start_replication_task_type # The type of replication task. # @return [String] # # @!attribute [rw] cdc_start_time # Indicates the start time for a change data capture (CDC) operation. # Use either CdcStartTime or CdcStartPosition to specify when you want # a CDC operation to start. Specifying both values results in an # error. # # Timestamp Example: --cdc-start-time “2018-03-08T12:12:12” # @return [Time] # # @!attribute [rw] cdc_start_position # Indicates when you want a change data capture (CDC) operation to # start. Use either CdcStartPosition or CdcStartTime to specify when # you want a CDC operation to start. Specifying both values results in # an error. # # The value can be in date, checkpoint, or LSN/SCN format. # # Date Example: --cdc-start-position “2018-03-08T12:12:12” # # Checkpoint Example: --cdc-start-position # "checkpoint:V1#27#mysql-bin-changelog.157832:1975:-1:2002:677883278264080:mysql-bin-changelog.157832:1876#0#0#*#0#93" # # LSN Example: --cdc-start-position “mysql-bin-changelog.000024:373” # @return [String] # # @!attribute [rw] cdc_stop_position # Indicates when you want a change data capture (CDC) operation to # stop. The value can be either server time or commit time. # # Server time example: --cdc-stop-position # “server\_time:3018-02-09T12:12:12” # # Commit time example: --cdc-stop-position “commit\_time: # 3018-02-09T12:12:12 “ # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/StartReplicationTaskMessage AWS API Documentation # class StartReplicationTaskMessage < Struct.new( :replication_task_arn, :start_replication_task_type, :cdc_start_time, :cdc_start_position, :cdc_stop_position) include Aws::Structure end # @!attribute [rw] replication_task # The replication task started. # @return [Types::ReplicationTask] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/StartReplicationTaskResponse AWS API Documentation # class StartReplicationTaskResponse < Struct.new( :replication_task) include Aws::Structure end # @note When making an API call, you may pass StopReplicationTaskMessage # data as a hash: # # { # replication_task_arn: "String", # required # } # # @!attribute [rw] replication_task_arn # The Amazon Resource Name(ARN) of the replication task to be stopped. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/StopReplicationTaskMessage AWS API Documentation # class StopReplicationTaskMessage < Struct.new( :replication_task_arn) include Aws::Structure end # @!attribute [rw] replication_task # The replication task stopped. # @return [Types::ReplicationTask] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/StopReplicationTaskResponse AWS API Documentation # class StopReplicationTaskResponse < Struct.new( :replication_task) include Aws::Structure end # The storage quota has been exceeded. # # @!attribute [rw] message # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/StorageQuotaExceededFault AWS API Documentation # class StorageQuotaExceededFault < Struct.new( :message) include Aws::Structure end # @!attribute [rw] subnet_identifier # The subnet identifier. # @return [String] # # @!attribute [rw] subnet_availability_zone # The Availability Zone of the subnet. # @return [Types::AvailabilityZone] # # @!attribute [rw] subnet_status # The status of the subnet. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/Subnet AWS API Documentation # class Subnet < Struct.new( :subnet_identifier, :subnet_availability_zone, :subnet_status) include Aws::Structure end # The specified subnet is already in use. # # @!attribute [rw] message # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/SubnetAlreadyInUse AWS API Documentation # class SubnetAlreadyInUse < Struct.new( :message) include Aws::Structure end # @!attribute [rw] engine_name # The database engine name. Valid values, depending on the # EndpointType, include mysql, oracle, postgres, mariadb, aurora, # aurora-postgresql, redshift, s3, db2, azuredb, sybase, dynamodb, # mongodb, and sqlserver. # @return [String] # # @!attribute [rw] supports_cdc # Indicates if Change Data Capture (CDC) is supported. # @return [Boolean] # # @!attribute [rw] endpoint_type # The type of endpoint. Valid values are `source` and `target`. # @return [String] # # @!attribute [rw] engine_display_name # The expanded name for the engine name. For example, if the # `EngineName` parameter is "aurora," this value would be "Amazon # Aurora MySQL." # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/SupportedEndpointType AWS API Documentation # class SupportedEndpointType < Struct.new( :engine_name, :supports_cdc, :endpoint_type, :engine_display_name) include Aws::Structure end # @!attribute [rw] schema_name # The schema name. # @return [String] # # @!attribute [rw] table_name # The name of the table. # @return [String] # # @!attribute [rw] inserts # The number of insert actions performed on a table. # @return [Integer] # # @!attribute [rw] deletes # The number of delete actions performed on a table. # @return [Integer] # # @!attribute [rw] updates # The number of update actions performed on a table. # @return [Integer] # # @!attribute [rw] ddls # The Data Definition Language (DDL) used to build and modify the # structure of your tables. # @return [Integer] # # @!attribute [rw] full_load_rows # The number of rows added during the Full Load operation. # @return [Integer] # # @!attribute [rw] full_load_condtnl_chk_failed_rows # The number of rows that failed conditional checks during the Full # Load operation (valid only for DynamoDB as a target migrations). # @return [Integer] # # @!attribute [rw] full_load_error_rows # The number of rows that failed to load during the Full Load # operation (valid only for DynamoDB as a target migrations). # @return [Integer] # # @!attribute [rw] last_update_time # The last time the table was updated. # @return [Time] # # @!attribute [rw] table_state # The state of the tables described. # # Valid states: Table does not exist \| Before load \| Full load \| # Table completed \| Table cancelled \| Table error \| Table all \| # Table updates \| Table is being reloaded # @return [String] # # @!attribute [rw] validation_pending_records # The number of records that have yet to be validated. # @return [Integer] # # @!attribute [rw] validation_failed_records # The number of records that failed validation. # @return [Integer] # # @!attribute [rw] validation_suspended_records # The number of records that could not be validated. # @return [Integer] # # @!attribute [rw] validation_state # The validation state of the table. # # The parameter can have the following values # # * Not enabled—Validation is not enabled for the table in the # migration task. # # * Pending records—Some records in the table are waiting for # validation. # # * Mismatched records—Some records in the table do not match between # the source and target. # # * Suspended records—Some records in the table could not be # validated. # # * No primary key—The table could not be validated because it had no # primary key. # # * Table error—The table was not validated because it was in an error # state and some data was not migrated. # # * Validated—All rows in the table were validated. If the table is # updated, the status can change from Validated. # # * Error—The table could not be validated because of an unexpected # error. # @return [String] # # @!attribute [rw] validation_state_details # Additional details about the state of validation. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/TableStatistics AWS API Documentation # class TableStatistics < Struct.new( :schema_name, :table_name, :inserts, :deletes, :updates, :ddls, :full_load_rows, :full_load_condtnl_chk_failed_rows, :full_load_error_rows, :last_update_time, :table_state, :validation_pending_records, :validation_failed_records, :validation_suspended_records, :validation_state, :validation_state_details) include Aws::Structure end # @note When making an API call, you may pass TableToReload # data as a hash: # # { # schema_name: "String", # table_name: "String", # } # # @!attribute [rw] schema_name # The schema name of the table to be reloaded. # @return [String] # # @!attribute [rw] table_name # The table name of the table to be reloaded. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/TableToReload AWS API Documentation # class TableToReload < Struct.new( :schema_name, :table_name) include Aws::Structure end # @note When making an API call, you may pass Tag # data as a hash: # # { # key: "String", # value: "String", # } # # @!attribute [rw] key # A key is the required name of the tag. The string value can be from # 1 to 128 Unicode characters in length and cannot be prefixed with # "aws:" or "dms:". The string can only contain only the set of # Unicode letters, digits, white-space, '\_', '.', '/', '=', # '+', '-' (Java regex: # "^(\[\\\\p\\\{L\\}\\\\p\\\{Z\\}\\\\p\\\{N\\}\_.:/=+\\\\-\]*)$"). # @return [String] # # @!attribute [rw] value # A value is the optional value of the tag. The string value can be # from 1 to 256 Unicode characters in length and cannot be prefixed # with "aws:" or "dms:". The string can only contain only the set # of Unicode letters, digits, white-space, '\_', '.', '/', # '=', '+', '-' (Java regex: # "^(\[\\\\p\\\{L\\}\\\\p\\\{Z\\}\\\\p\\\{N\\}\_.:/=+\\\\-\]*)$"). # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/Tag AWS API Documentation # class Tag < Struct.new( :key, :value) include Aws::Structure end # @note When making an API call, you may pass TestConnectionMessage # data as a hash: # # { # replication_instance_arn: "String", # required # endpoint_arn: "String", # required # } # # @!attribute [rw] replication_instance_arn # The Amazon Resource Name (ARN) of the replication instance. # @return [String] # # @!attribute [rw] endpoint_arn # The Amazon Resource Name (ARN) string that uniquely identifies the # endpoint. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/TestConnectionMessage AWS API Documentation # class TestConnectionMessage < Struct.new( :replication_instance_arn, :endpoint_arn) include Aws::Structure end # @!attribute [rw] connection # The connection tested. # @return [Types::Connection] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/TestConnectionResponse AWS API Documentation # class TestConnectionResponse < Struct.new( :connection) include Aws::Structure end # An upgrade dependency is preventing the database migration. # # @!attribute [rw] message # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/UpgradeDependencyFailureFault AWS API Documentation # class UpgradeDependencyFailureFault < Struct.new( :message) include Aws::Structure end # @!attribute [rw] vpc_security_group_id # The VPC security group Id. # @return [String] # # @!attribute [rw] status # The status of the VPC security group. # @return [String] # # @see http://docs.aws.amazon.com/goto/WebAPI/dms-2016-01-01/VpcSecurityGroupMembership AWS API Documentation # class VpcSecurityGroupMembership < Struct.new( :vpc_security_group_id, :status) include Aws::Structure end end end