# frozen_string_literal: true # WARNING ABOUT GENERATED CODE # # This file is generated. See the contributing guide for more information: # https://github.com/aws/aws-sdk-ruby/blob/version-3/CONTRIBUTING.md # # WARNING ABOUT GENERATED CODE require 'seahorse/client/plugins/content_length.rb' require 'aws-sdk-core/plugins/credentials_configuration.rb' require 'aws-sdk-core/plugins/logging.rb' require 'aws-sdk-core/plugins/param_converter.rb' require 'aws-sdk-core/plugins/param_validator.rb' require 'aws-sdk-core/plugins/user_agent.rb' require 'aws-sdk-core/plugins/helpful_socket_errors.rb' require 'aws-sdk-core/plugins/retry_errors.rb' require 'aws-sdk-core/plugins/global_configuration.rb' require 'aws-sdk-core/plugins/regional_endpoint.rb' require 'aws-sdk-core/plugins/endpoint_discovery.rb' require 'aws-sdk-core/plugins/endpoint_pattern.rb' require 'aws-sdk-core/plugins/response_paging.rb' require 'aws-sdk-core/plugins/stub_responses.rb' require 'aws-sdk-core/plugins/idempotency_token.rb' require 'aws-sdk-core/plugins/jsonvalue_converter.rb' require 'aws-sdk-core/plugins/client_metrics_plugin.rb' require 'aws-sdk-core/plugins/client_metrics_send_plugin.rb' require 'aws-sdk-core/plugins/transfer_encoding.rb' require 'aws-sdk-core/plugins/http_checksum.rb' require 'aws-sdk-core/plugins/checksum_algorithm.rb' require 'aws-sdk-core/plugins/defaults_mode.rb' require 'aws-sdk-core/plugins/recursion_detection.rb' require 'aws-sdk-core/plugins/signature_v4.rb' require 'aws-sdk-core/plugins/protocols/json_rpc.rb' Aws::Plugins::GlobalConfiguration.add_identifier(:transfer) module Aws::Transfer # An API client for Transfer. To construct a client, you need to configure a `:region` and `:credentials`. # # client = Aws::Transfer::Client.new( # region: region_name, # credentials: credentials, # # ... # ) # # For details on configuring region and credentials see # the [developer guide](/sdk-for-ruby/v3/developer-guide/setup-config.html). # # See {#initialize} for a full list of supported configuration options. class Client < Seahorse::Client::Base include Aws::ClientStubs @identifier = :transfer set_api(ClientApi::API) add_plugin(Seahorse::Client::Plugins::ContentLength) add_plugin(Aws::Plugins::CredentialsConfiguration) add_plugin(Aws::Plugins::Logging) add_plugin(Aws::Plugins::ParamConverter) add_plugin(Aws::Plugins::ParamValidator) add_plugin(Aws::Plugins::UserAgent) add_plugin(Aws::Plugins::HelpfulSocketErrors) add_plugin(Aws::Plugins::RetryErrors) add_plugin(Aws::Plugins::GlobalConfiguration) add_plugin(Aws::Plugins::RegionalEndpoint) add_plugin(Aws::Plugins::EndpointDiscovery) add_plugin(Aws::Plugins::EndpointPattern) add_plugin(Aws::Plugins::ResponsePaging) add_plugin(Aws::Plugins::StubResponses) add_plugin(Aws::Plugins::IdempotencyToken) add_plugin(Aws::Plugins::JsonvalueConverter) add_plugin(Aws::Plugins::ClientMetricsPlugin) add_plugin(Aws::Plugins::ClientMetricsSendPlugin) add_plugin(Aws::Plugins::TransferEncoding) add_plugin(Aws::Plugins::HttpChecksum) add_plugin(Aws::Plugins::ChecksumAlgorithm) add_plugin(Aws::Plugins::DefaultsMode) add_plugin(Aws::Plugins::RecursionDetection) add_plugin(Aws::Plugins::SignatureV4) add_plugin(Aws::Plugins::Protocols::JsonRpc) # @overload initialize(options) # @param [Hash] options # @option options [required, Aws::CredentialProvider] :credentials # Your AWS credentials. This can be an instance of any one of the # following classes: # # * `Aws::Credentials` - Used for configuring static, non-refreshing # credentials. # # * `Aws::SharedCredentials` - Used for loading static credentials from a # shared file, such as `~/.aws/config`. # # * `Aws::AssumeRoleCredentials` - Used when you need to assume a role. # # * `Aws::AssumeRoleWebIdentityCredentials` - Used when you need to # assume a role after providing credentials via the web. # # * `Aws::SSOCredentials` - Used for loading credentials from AWS SSO using an # access token generated from `aws login`. # # * `Aws::ProcessCredentials` - Used for loading credentials from a # process that outputs to stdout. # # * `Aws::InstanceProfileCredentials` - Used for loading credentials # from an EC2 IMDS on an EC2 instance. # # * `Aws::ECSCredentials` - Used for loading credentials from # instances running in ECS. # # * `Aws::CognitoIdentityCredentials` - Used for loading credentials # from the Cognito Identity service. # # When `:credentials` are not configured directly, the following # locations will be searched for credentials: # # * `Aws.config[:credentials]` # * The `:access_key_id`, `:secret_access_key`, and `:session_token` options. # * ENV['AWS_ACCESS_KEY_ID'], ENV['AWS_SECRET_ACCESS_KEY'] # * `~/.aws/credentials` # * `~/.aws/config` # * EC2/ECS IMDS instance profile - When used by default, the timeouts # are very aggressive. Construct and pass an instance of # `Aws::InstanceProfileCredentails` or `Aws::ECSCredentials` to # enable retries and extended timeouts. Instance profile credential # fetching can be disabled by setting ENV['AWS_EC2_METADATA_DISABLED'] # to true. # # @option options [required, String] :region # The AWS region to connect to. The configured `:region` is # used to determine the service `:endpoint`. When not passed, # a default `:region` is searched for in the following locations: # # * `Aws.config[:region]` # * `ENV['AWS_REGION']` # * `ENV['AMAZON_REGION']` # * `ENV['AWS_DEFAULT_REGION']` # * `~/.aws/credentials` # * `~/.aws/config` # # @option options [String] :access_key_id # # @option options [Boolean] :active_endpoint_cache (false) # When set to `true`, a thread polling for endpoints will be running in # the background every 60 secs (default). Defaults to `false`. # # @option options [Boolean] :adaptive_retry_wait_to_fill (true) # Used only in `adaptive` retry mode. When true, the request will sleep # until there is sufficent client side capacity to retry the request. # When false, the request will raise a `RetryCapacityNotAvailableError` and will # not retry instead of sleeping. # # @option options [Boolean] :client_side_monitoring (false) # When `true`, client-side metrics will be collected for all API requests from # this client. # # @option options [String] :client_side_monitoring_client_id ("") # Allows you to provide an identifier for this client which will be attached to # all generated client side metrics. Defaults to an empty string. # # @option options [String] :client_side_monitoring_host ("127.0.0.1") # Allows you to specify the DNS hostname or IPv4 or IPv6 address that the client # side monitoring agent is running on, where client metrics will be published via UDP. # # @option options [Integer] :client_side_monitoring_port (31000) # Required for publishing client metrics. The port that the client side monitoring # agent is running on, where client metrics will be published via UDP. # # @option options [Aws::ClientSideMonitoring::Publisher] :client_side_monitoring_publisher (Aws::ClientSideMonitoring::Publisher) # Allows you to provide a custom client-side monitoring publisher class. By default, # will use the Client Side Monitoring Agent Publisher. # # @option options [Boolean] :convert_params (true) # When `true`, an attempt is made to coerce request parameters into # the required types. # # @option options [Boolean] :correct_clock_skew (true) # Used only in `standard` and adaptive retry modes. Specifies whether to apply # a clock skew correction and retry requests with skewed client clocks. # # @option options [String] :defaults_mode ("legacy") # See {Aws::DefaultsModeConfiguration} for a list of the # accepted modes and the configuration defaults that are included. # # @option options [Boolean] :disable_host_prefix_injection (false) # Set to true to disable SDK automatically adding host prefix # to default service endpoint when available. # # @option options [String] :endpoint # The client endpoint is normally constructed from the `:region` # option. You should only configure an `:endpoint` when connecting # to test or custom endpoints. This should be a valid HTTP(S) URI. # # @option options [Integer] :endpoint_cache_max_entries (1000) # Used for the maximum size limit of the LRU cache storing endpoints data # for endpoint discovery enabled operations. Defaults to 1000. # # @option options [Integer] :endpoint_cache_max_threads (10) # Used for the maximum threads in use for polling endpoints to be cached, defaults to 10. # # @option options [Integer] :endpoint_cache_poll_interval (60) # When :endpoint_discovery and :active_endpoint_cache is enabled, # Use this option to config the time interval in seconds for making # requests fetching endpoints information. Defaults to 60 sec. # # @option options [Boolean] :endpoint_discovery (false) # When set to `true`, endpoint discovery will be enabled for operations when available. # # @option options [Aws::Log::Formatter] :log_formatter (Aws::Log::Formatter.default) # The log formatter. # # @option options [Symbol] :log_level (:info) # The log level to send messages to the `:logger` at. # # @option options [Logger] :logger # The Logger instance to send log messages to. If this option # is not set, logging will be disabled. # # @option options [Integer] :max_attempts (3) # An integer representing the maximum number attempts that will be made for # a single request, including the initial attempt. For example, # setting this value to 5 will result in a request being retried up to # 4 times. Used in `standard` and `adaptive` retry modes. # # @option options [String] :profile ("default") # Used when loading credentials from the shared credentials file # at HOME/.aws/credentials. When not specified, 'default' is used. # # @option options [Proc] :retry_backoff # A proc or lambda used for backoff. Defaults to 2**retries * retry_base_delay. # This option is only used in the `legacy` retry mode. # # @option options [Float] :retry_base_delay (0.3) # The base delay in seconds used by the default backoff function. This option # is only used in the `legacy` retry mode. # # @option options [Symbol] :retry_jitter (:none) # A delay randomiser function used by the default backoff function. # Some predefined functions can be referenced by name - :none, :equal, :full, # otherwise a Proc that takes and returns a number. This option is only used # in the `legacy` retry mode. # # @see https://www.awsarchitectureblog.com/2015/03/backoff.html # # @option options [Integer] :retry_limit (3) # The maximum number of times to retry failed requests. Only # ~ 500 level server errors and certain ~ 400 level client errors # are retried. Generally, these are throttling errors, data # checksum errors, networking errors, timeout errors, auth errors, # endpoint discovery, and errors from expired credentials. # This option is only used in the `legacy` retry mode. # # @option options [Integer] :retry_max_delay (0) # The maximum number of seconds to delay between retries (0 for no limit) # used by the default backoff function. This option is only used in the # `legacy` retry mode. # # @option options [String] :retry_mode ("legacy") # Specifies which retry algorithm to use. Values are: # # * `legacy` - The pre-existing retry behavior. This is default value if # no retry mode is provided. # # * `standard` - A standardized set of retry rules across the AWS SDKs. # This includes support for retry quotas, which limit the number of # unsuccessful retries a client can make. # # * `adaptive` - An experimental retry mode that includes all the # functionality of `standard` mode along with automatic client side # throttling. This is a provisional mode that may change behavior # in the future. # # # @option options [String] :secret_access_key # # @option options [String] :session_token # # @option options [Boolean] :simple_json (false) # Disables request parameter conversion, validation, and formatting. # Also disable response data type conversions. This option is useful # when you want to ensure the highest level of performance by # avoiding overhead of walking request parameters and response data # structures. # # When `:simple_json` is enabled, the request parameters hash must # be formatted exactly as the DynamoDB API expects. # # @option options [Boolean] :stub_responses (false) # Causes the client to return stubbed responses. By default # fake responses are generated and returned. You can specify # the response data to return or errors to raise by calling # {ClientStubs#stub_responses}. See {ClientStubs} for more information. # # ** Please note ** When response stubbing is enabled, no HTTP # requests are made, and retries are disabled. # # @option options [Boolean] :use_dualstack_endpoint # When set to `true`, dualstack enabled endpoints (with `.aws` TLD) # will be used if available. # # @option options [Boolean] :use_fips_endpoint # When set to `true`, fips compatible endpoints will be used if available. # When a `fips` region is used, the region is normalized and this config # is set to `true`. # # @option options [Boolean] :validate_params (true) # When `true`, request parameters are validated before # sending the request. # # @option options [URI::HTTP,String] :http_proxy A proxy to send # requests through. Formatted like 'http://proxy.com:123'. # # @option options [Float] :http_open_timeout (15) The number of # seconds to wait when opening a HTTP session before raising a # `Timeout::Error`. # # @option options [Float] :http_read_timeout (60) The default # number of seconds to wait for response data. This value can # safely be set per-request on the session. # # @option options [Float] :http_idle_timeout (5) The number of # seconds a connection is allowed to sit idle before it is # considered stale. Stale connections are closed and removed # from the pool before making a request. # # @option options [Float] :http_continue_timeout (1) The number of # seconds to wait for a 100-continue response before sending the # request body. This option has no effect unless the request has # "Expect" header set to "100-continue". Defaults to `nil` which # disables this behaviour. This value can safely be set per # request on the session. # # @option options [Float] :ssl_timeout (nil) Sets the SSL timeout # in seconds. # # @option options [Boolean] :http_wire_trace (false) When `true`, # HTTP debug output will be sent to the `:logger`. # # @option options [Boolean] :ssl_verify_peer (true) When `true`, # SSL peer certificates are verified when establishing a # connection. # # @option options [String] :ssl_ca_bundle Full path to the SSL # certificate authority bundle file that should be used when # verifying peer certificates. If you do not pass # `:ssl_ca_bundle` or `:ssl_ca_directory` the the system default # will be used if available. # # @option options [String] :ssl_ca_directory Full path of the # directory that contains the unbundled SSL certificate # authority files for verifying peer certificates. If you do # not pass `:ssl_ca_bundle` or `:ssl_ca_directory` the the # system default will be used if available. # def initialize(*args) super end # @!group API Operations # Used by administrators to choose which groups in the directory should # have access to upload and download files over the enabled protocols # using Amazon Web Services Transfer Family. For example, a Microsoft # Active Directory might contain 50,000 users, but only a small fraction # might need the ability to transfer files to the server. An # administrator can use `CreateAccess` to limit the access to the # correct set of users who need this ability. # # @option params [String] :home_directory # The landing directory (folder) for a user when they log in to the # server using the client. # # A `HomeDirectory` example is `/bucket_name/home/mydirectory`. # # @option params [String] :home_directory_type # The type of landing directory (folder) you want your users' home # directory to be when they log into the server. If you set it to # `PATH`, the user will see the absolute Amazon S3 bucket or EFS paths # as is in their file transfer protocol clients. If you set it # `LOGICAL`, you need to provide mappings in the `HomeDirectoryMappings` # for how you want to make Amazon S3 or EFS paths visible to your users. # # @option params [Array] :home_directory_mappings # Logical directory mappings that specify what Amazon S3 or Amazon EFS # paths and keys should be visible to your user and how you want to make # them visible. You must specify the `Entry` and `Target` pair, where # `Entry` shows how the path is made visible and `Target` is the actual # Amazon S3 or Amazon EFS path. If you only specify a target, it is # displayed as is. You also must ensure that your Amazon Web Services # Identity and Access Management (IAM) role provides access to paths in # `Target`. This value can only be set when `HomeDirectoryType` is set # to *LOGICAL*. # # The following is an `Entry` and `Target` pair example. # # `[ \{ "Entry": "/directory1", "Target": # "/bucket_name/home/mydirectory" \} ]` # # In most cases, you can use this value instead of the session policy to # lock down your user to the designated home directory ("`chroot`"). # To do this, you can set `Entry` to `/` and set `Target` to the # `HomeDirectory` parameter value. # # The following is an `Entry` and `Target` pair example for `chroot`. # # `[ \{ "Entry": "/", "Target": "/bucket_name/home/mydirectory" \} ]` # # @option params [String] :policy # A session policy for your user so that you can use the same IAM role # across multiple users. This policy scopes down user access to portions # of their Amazon S3 bucket. Variables that you can use inside this # policy include `$\{Transfer:UserName\}`, # `$\{Transfer:HomeDirectory\}`, and `$\{Transfer:HomeBucket\}`. # # This only applies when the domain of `ServerId` is S3. EFS does not # use session policies. # # For session policies, Amazon Web Services Transfer Family stores the # policy as a JSON blob, instead of the Amazon Resource Name (ARN) of # the policy. You save the policy as a JSON blob and pass it in the # `Policy` argument. # # For an example of a session policy, see [Example session policy][1]. # # For more information, see [AssumeRole][2] in the *Amazon Web Services # Security Token Service API Reference*. # # # # # # [1]: https://docs.aws.amazon.com/transfer/latest/userguide/session-policy.html # [2]: https://docs.aws.amazon.com/STS/latest/APIReference/API_AssumeRole.html # # @option params [Types::PosixProfile] :posix_profile # The full POSIX identity, including user ID (`Uid`), group ID (`Gid`), # and any secondary groups IDs (`SecondaryGids`), that controls your # users' access to your Amazon EFS file systems. The POSIX permissions # that are set on files and directories in your file system determine # the level of access your users get when transferring files into and # out of your Amazon EFS file systems. # # @option params [required, String] :role # Specifies the Amazon Resource Name (ARN) of the IAM role that controls # your users' access to your Amazon S3 bucket or EFS file system. The # policies attached to this role determine the level of access that you # want to provide your users when transferring files into and out of # your Amazon S3 bucket or EFS file system. The IAM role should also # contain a trust relationship that allows the server to access your # resources when servicing your users' transfer requests. # # @option params [required, String] :server_id # A system-assigned unique identifier for a server instance. This is the # specific server that you added your user to. # # @option params [required, String] :external_id # A unique identifier that is required to identify specific groups # within your directory. The users of the group that you associate have # access to your Amazon S3 or Amazon EFS resources over the enabled # protocols using Amazon Web Services Transfer Family. If you know the # group name, you can view the SID values by running the following # command using Windows PowerShell. # # `Get-ADGroup -Filter \{samAccountName -like "YourGroupName*"\} # -Properties * | Select SamAccountName,ObjectSid` # # In that command, replace *YourGroupName* with the name of your Active # Directory group. # # The regex used to validate this parameter is a string of characters # consisting of uppercase and lowercase alphanumeric characters with no # spaces. You can also include underscores or any of the following # characters: =,.@:/- # # @return [Types::CreateAccessResponse] Returns a {Seahorse::Client::Response response} object which responds to the following methods: # # * {Types::CreateAccessResponse#server_id #server_id} => String # * {Types::CreateAccessResponse#external_id #external_id} => String # # @example Request syntax with placeholder values # # resp = client.create_access({ # home_directory: "HomeDirectory", # home_directory_type: "PATH", # accepts PATH, LOGICAL # home_directory_mappings: [ # { # entry: "MapEntry", # required # target: "MapTarget", # required # }, # ], # policy: "Policy", # posix_profile: { # uid: 1, # required # gid: 1, # required # secondary_gids: [1], # }, # role: "Role", # required # server_id: "ServerId", # required # external_id: "ExternalId", # required # }) # # @example Response structure # # resp.server_id #=> String # resp.external_id #=> String # # @see http://docs.aws.amazon.com/goto/WebAPI/transfer-2018-11-05/CreateAccess AWS API Documentation # # @overload create_access(params = {}) # @param [Hash] params ({}) def create_access(params = {}, options = {}) req = build_request(:create_access, params) req.send_request(options) end # Instantiates an auto-scaling virtual server based on the selected file # transfer protocol in Amazon Web Services. When you make updates to # your file transfer protocol-enabled server or when you work with # users, use the service-generated `ServerId` property that is assigned # to the newly created server. # # @option params [String] :certificate # The Amazon Resource Name (ARN) of the Amazon Web Services Certificate # Manager (ACM) certificate. Required when `Protocols` is set to `FTPS`. # # To request a new public certificate, see [Request a public # certificate][1] in the Amazon Web Services Certificate Manager # User Guide. # # To import an existing certificate into ACM, see [Importing # certificates into ACM][2] in the Amazon Web Services Certificate # Manager User Guide. # # To request a private certificate to use FTPS through private IP # addresses, see [Request a private certificate][3] in the Amazon # Web Services Certificate Manager User Guide. # # Certificates with the following cryptographic algorithms and key sizes # are supported: # # * 2048-bit RSA (RSA\_2048) # # * 4096-bit RSA (RSA\_4096) # # * Elliptic Prime Curve 256 bit (EC\_prime256v1) # # * Elliptic Prime Curve 384 bit (EC\_secp384r1) # # * Elliptic Prime Curve 521 bit (EC\_secp521r1) # # The certificate must be a valid SSL/TLS X.509 version 3 certificate # with FQDN or IP address specified and information about the issuer. # # # # # # [1]: https://docs.aws.amazon.com/acm/latest/userguide/gs-acm-request-public.html # [2]: https://docs.aws.amazon.com/acm/latest/userguide/import-certificate.html # [3]: https://docs.aws.amazon.com/acm/latest/userguide/gs-acm-request-private.html # # @option params [String] :domain # The domain of the storage system that is used for file transfers. # There are two domains available: Amazon Simple Storage Service (Amazon # S3) and Amazon Elastic File System (Amazon EFS). The default value is # S3. # # After the server is created, the domain cannot be changed. # # # # @option params [Types::EndpointDetails] :endpoint_details # The virtual private cloud (VPC) endpoint settings that are configured # for your server. When you host your endpoint within your VPC, you can # make it accessible only to resources within your VPC, or you can # attach Elastic IP addresses and make it accessible to clients over the # internet. Your VPC's default security groups are automatically # assigned to your endpoint. # # @option params [String] :endpoint_type # The type of endpoint that you want your server to use. You can choose # to make your server's endpoint publicly accessible (PUBLIC) or host # it inside your VPC. With an endpoint that is hosted in a VPC, you can # restrict access to your server and resources only within your VPC or # choose to make it internet facing by attaching Elastic IP addresses # directly to it. # # After May 19, 2021, you won't be able to create a server using # `EndpointType=VPC_ENDPOINT` in your Amazon Web Services account if # your account hasn't already done so before May 19, 2021. If you have # already created servers with `EndpointType=VPC_ENDPOINT` in your # Amazon Web Services account on or before May 19, 2021, you will not be # affected. After this date, use `EndpointType`=`VPC`. # # For more information, see # https://docs.aws.amazon.com/transfer/latest/userguide/create-server-in-vpc.html#deprecate-vpc-endpoint. # # It is recommended that you use `VPC` as the `EndpointType`. With this # endpoint type, you have the option to directly associate up to three # Elastic IPv4 addresses (BYO IP included) with your server's endpoint # and use VPC security groups to restrict traffic by the client's # public IP address. This is not possible with `EndpointType` set to # `VPC_ENDPOINT`. # # # # @option params [String] :host_key # The RSA private key as generated by the `ssh-keygen -N "" -m PEM -f # my-new-server-key` command. # # If you aren't planning to migrate existing users from an existing # SFTP-enabled server to a new server, don't update the host key. # Accidentally changing a server's host key can be disruptive. # # For more information, see [Change the host key for your SFTP-enabled # server][1] in the *Amazon Web Services Transfer Family User Guide*. # # # # [1]: https://docs.aws.amazon.com/transfer/latest/userguide/edit-server-config.html#configuring-servers-change-host-key # # @option params [Types::IdentityProviderDetails] :identity_provider_details # Required when `IdentityProviderType` is set to `AWS_DIRECTORY_SERVICE` # or `API_GATEWAY`. Accepts an array containing all of the information # required to use a directory in `AWS_DIRECTORY_SERVICE` or invoke a # customer-supplied authentication API, including the API Gateway URL. # Not required when `IdentityProviderType` is set to `SERVICE_MANAGED`. # # @option params [String] :identity_provider_type # Specifies the mode of authentication for a server. The default value # is `SERVICE_MANAGED`, which allows you to store and access user # credentials within the Amazon Web Services Transfer Family service. # # Use `AWS_DIRECTORY_SERVICE` to provide access to Active Directory # groups in Amazon Web Services Managed Active Directory or Microsoft # Active Directory in your on-premises environment or in Amazon Web # Services using AD Connectors. This option also requires you to provide # a Directory ID using the `IdentityProviderDetails` parameter. # # Use the `API_GATEWAY` value to integrate with an identity provider of # your choosing. The `API_GATEWAY` setting requires you to provide an # API Gateway endpoint URL to call for authentication using the # `IdentityProviderDetails` parameter. # # Use the `AWS_LAMBDA` value to directly use a Lambda function as your # identity provider. If you choose this value, you must specify the ARN # for the lambda function in the `Function` parameter for the # `IdentityProviderDetails` data type. # # @option params [String] :logging_role # Specifies the Amazon Resource Name (ARN) of the Amazon Web Services # Identity and Access Management (IAM) role that allows a server to turn # on Amazon CloudWatch logging for Amazon S3 or Amazon EFS events. When # set, user activity can be viewed in your CloudWatch logs. # # @option params [String] :post_authentication_login_banner # Specify a string to display when users connect to a server. This # string is displayed after the user authenticates. # # The SFTP protocol does not support post-authentication display # banners. # # # # @option params [String] :pre_authentication_login_banner # Specify a string to display when users connect to a server. This # string is displayed before the user authenticates. For example, the # following banner displays details about using the system. # # `This system is for the use of authorized users only. Individuals # using this computer system without authority, or in excess of their # authority, are subject to having all of their activities on this # system monitored and recorded by system personnel.` # # @option params [Array] :protocols # Specifies the file transfer protocol or protocols over which your file # transfer protocol client can connect to your server's endpoint. The # available protocols are: # # * `SFTP` (Secure Shell (SSH) File Transfer Protocol): File transfer # over SSH # # * `FTPS` (File Transfer Protocol Secure): File transfer with TLS # encryption # # * `FTP` (File Transfer Protocol): Unencrypted file transfer # # If you select `FTPS`, you must choose a certificate stored in Amazon # Web Services Certificate Manager (ACM) which is used to identify your # server when clients connect to it over FTPS. # # If `Protocol` includes either `FTP` or `FTPS`, then the `EndpointType` # must be `VPC` and the `IdentityProviderType` must be # `AWS_DIRECTORY_SERVICE` or `API_GATEWAY`. # # If `Protocol` includes `FTP`, then `AddressAllocationIds` cannot be # associated. # # If `Protocol` is set only to `SFTP`, the `EndpointType` can be set to # `PUBLIC` and the `IdentityProviderType` can be set to # `SERVICE_MANAGED`. # # # # @option params [Types::ProtocolDetails] :protocol_details # The protocol settings that are configured for your server. # # Use the `PassiveIp` parameter to indicate passive mode (for FTP and # FTPS protocols). Enter a single dotted-quad IPv4 address, such as the # external IP address of a firewall, router, or load balancer. # # Use the `TlsSessionResumptionMode` parameter to determine whether or # not your Transfer server resumes recent, negotiated sessions through a # unique session ID. # # @option params [String] :security_policy_name # Specifies the name of the security policy that is attached to the # server. # # @option params [Array] :tags # Key-value pairs that can be used to group and search for servers. # # @option params [Types::WorkflowDetails] :workflow_details # Specifies the workflow ID for the workflow to assign and the execution # role used for executing the workflow. # # @return [Types::CreateServerResponse] Returns a {Seahorse::Client::Response response} object which responds to the following methods: # # * {Types::CreateServerResponse#server_id #server_id} => String # # @example Request syntax with placeholder values # # resp = client.create_server({ # certificate: "Certificate", # domain: "S3", # accepts S3, EFS # endpoint_details: { # address_allocation_ids: ["AddressAllocationId"], # subnet_ids: ["SubnetId"], # vpc_endpoint_id: "VpcEndpointId", # vpc_id: "VpcId", # security_group_ids: ["SecurityGroupId"], # }, # endpoint_type: "PUBLIC", # accepts PUBLIC, VPC, VPC_ENDPOINT # host_key: "HostKey", # identity_provider_details: { # url: "Url", # invocation_role: "Role", # directory_id: "DirectoryId", # function: "Function", # }, # identity_provider_type: "SERVICE_MANAGED", # accepts SERVICE_MANAGED, API_GATEWAY, AWS_DIRECTORY_SERVICE, AWS_LAMBDA # logging_role: "Role", # post_authentication_login_banner: "PostAuthenticationLoginBanner", # pre_authentication_login_banner: "PreAuthenticationLoginBanner", # protocols: ["SFTP"], # accepts SFTP, FTP, FTPS # protocol_details: { # passive_ip: "PassiveIp", # tls_session_resumption_mode: "DISABLED", # accepts DISABLED, ENABLED, ENFORCED # }, # security_policy_name: "SecurityPolicyName", # tags: [ # { # key: "TagKey", # required # value: "TagValue", # required # }, # ], # workflow_details: { # on_upload: [ # required # { # workflow_id: "WorkflowId", # required # execution_role: "Role", # required # }, # ], # }, # }) # # @example Response structure # # resp.server_id #=> String # # @see http://docs.aws.amazon.com/goto/WebAPI/transfer-2018-11-05/CreateServer AWS API Documentation # # @overload create_server(params = {}) # @param [Hash] params ({}) def create_server(params = {}, options = {}) req = build_request(:create_server, params) req.send_request(options) end # Creates a user and associates them with an existing file transfer # protocol-enabled server. You can only create and associate users with # servers that have the `IdentityProviderType` set to `SERVICE_MANAGED`. # Using parameters for `CreateUser`, you can specify the user name, set # the home directory, store the user's public key, and assign the # user's Amazon Web Services Identity and Access Management (IAM) role. # You can also optionally add a session policy, and assign metadata with # tags that can be used to group and search for users. # # @option params [String] :home_directory # The landing directory (folder) for a user when they log in to the # server using the client. # # A `HomeDirectory` example is `/bucket_name/home/mydirectory`. # # @option params [String] :home_directory_type # The type of landing directory (folder) you want your users' home # directory to be when they log into the server. If you set it to # `PATH`, the user will see the absolute Amazon S3 bucket or EFS paths # as is in their file transfer protocol clients. If you set it # `LOGICAL`, you need to provide mappings in the `HomeDirectoryMappings` # for how you want to make Amazon S3 or EFS paths visible to your users. # # @option params [Array] :home_directory_mappings # Logical directory mappings that specify what Amazon S3 or Amazon EFS # paths and keys should be visible to your user and how you want to make # them visible. You must specify the `Entry` and `Target` pair, where # `Entry` shows how the path is made visible and `Target` is the actual # Amazon S3 or Amazon EFS path. If you only specify a target, it is # displayed as is. You also must ensure that your Amazon Web Services # Identity and Access Management (IAM) role provides access to paths in # `Target`. This value can only be set when `HomeDirectoryType` is set # to *LOGICAL*. # # The following is an `Entry` and `Target` pair example. # # `[ \{ "Entry": "/directory1", "Target": # "/bucket_name/home/mydirectory" \} ]` # # In most cases, you can use this value instead of the session policy to # lock your user down to the designated home directory ("`chroot`"). # To do this, you can set `Entry` to `/` and set `Target` to the # HomeDirectory parameter value. # # The following is an `Entry` and `Target` pair example for `chroot`. # # `[ \{ "Entry": "/", "Target": "/bucket_name/home/mydirectory" \} ]` # # @option params [String] :policy # A session policy for your user so that you can use the same IAM role # across multiple users. This policy scopes down user access to portions # of their Amazon S3 bucket. Variables that you can use inside this # policy include `$\{Transfer:UserName\}`, # `$\{Transfer:HomeDirectory\}`, and `$\{Transfer:HomeBucket\}`. # # This only applies when the domain of `ServerId` is S3. EFS does not # use session policies. # # For session policies, Amazon Web Services Transfer Family stores the # policy as a JSON blob, instead of the Amazon Resource Name (ARN) of # the policy. You save the policy as a JSON blob and pass it in the # `Policy` argument. # # For an example of a session policy, see [Example session policy][1]. # # For more information, see [AssumeRole][2] in the *Amazon Web Services # Security Token Service API Reference*. # # # # # # [1]: https://docs.aws.amazon.com/transfer/latest/userguide/session-policy.html # [2]: https://docs.aws.amazon.com/STS/latest/APIReference/API_AssumeRole.html # # @option params [Types::PosixProfile] :posix_profile # Specifies the full POSIX identity, including user ID (`Uid`), group ID # (`Gid`), and any secondary groups IDs (`SecondaryGids`), that controls # your users' access to your Amazon EFS file systems. The POSIX # permissions that are set on files and directories in Amazon EFS # determine the level of access your users get when transferring files # into and out of your Amazon EFS file systems. # # @option params [required, String] :role # Specifies the Amazon Resource Name (ARN) of the IAM role that controls # your users' access to your Amazon S3 bucket or EFS file system. The # policies attached to this role determine the level of access that you # want to provide your users when transferring files into and out of # your Amazon S3 bucket or EFS file system. The IAM role should also # contain a trust relationship that allows the server to access your # resources when servicing your users' transfer requests. # # @option params [required, String] :server_id # A system-assigned unique identifier for a server instance. This is the # specific server that you added your user to. # # @option params [String] :ssh_public_key_body # The public portion of the Secure Shell (SSH) key used to authenticate # the user to the server. # # Currently, Transfer Family does not accept elliptical curve keys (keys # beginning with `ecdsa`). # # # # @option params [Array] :tags # Key-value pairs that can be used to group and search for users. Tags # are metadata attached to users for any purpose. # # @option params [required, String] :user_name # A unique string that identifies a user and is associated with a # `ServerId`. This user name must be a minimum of 3 and a maximum of 100 # characters long. The following are valid characters: a-z, A-Z, 0-9, # underscore '\_', hyphen '-', period '.', and at sign '@'. The # user name can't start with a hyphen, period, or at sign. # # @return [Types::CreateUserResponse] Returns a {Seahorse::Client::Response response} object which responds to the following methods: # # * {Types::CreateUserResponse#server_id #server_id} => String # * {Types::CreateUserResponse#user_name #user_name} => String # # @example Request syntax with placeholder values # # resp = client.create_user({ # home_directory: "HomeDirectory", # home_directory_type: "PATH", # accepts PATH, LOGICAL # home_directory_mappings: [ # { # entry: "MapEntry", # required # target: "MapTarget", # required # }, # ], # policy: "Policy", # posix_profile: { # uid: 1, # required # gid: 1, # required # secondary_gids: [1], # }, # role: "Role", # required # server_id: "ServerId", # required # ssh_public_key_body: "SshPublicKeyBody", # tags: [ # { # key: "TagKey", # required # value: "TagValue", # required # }, # ], # user_name: "UserName", # required # }) # # @example Response structure # # resp.server_id #=> String # resp.user_name #=> String # # @see http://docs.aws.amazon.com/goto/WebAPI/transfer-2018-11-05/CreateUser AWS API Documentation # # @overload create_user(params = {}) # @param [Hash] params ({}) def create_user(params = {}, options = {}) req = build_request(:create_user, params) req.send_request(options) end # Allows you to create a workflow with specified steps and step details # the workflow invokes after file transfer completes. After creating a # workflow, you can associate the workflow created with any transfer # servers by specifying the `workflow-details` field in `CreateServer` # and `UpdateServer` operations. # # @option params [String] :description # A textual description for the workflow. # # @option params [required, Array] :steps # Specifies the details for the steps that are in the specified # workflow. # # The `TYPE` specifies which of the following actions is being taken for # this step. # # * *COPY*\: copy the file to another location # # * *CUSTOM*\: custom step with a lambda target # # * *DELETE*\: delete the file # # * *TAG*\: add a tag to the file # # Currently, copying and tagging are supported only on S3. # # # # For file location, you specify either the S3 bucket and key, or the # EFS filesystem ID and path. # # @option params [Array] :on_exception_steps # Specifies the steps (actions) to take if errors are encountered during # execution of the workflow. # # For custom steps, the lambda function needs to send `FAILURE` to the # call back API to kick off the exception steps. Additionally, if the # lambda does not send `SUCCESS` before it times out, the exception # steps are executed. # # # # @option params [Array] :tags # Key-value pairs that can be used to group and search for workflows. # Tags are metadata attached to workflows for any purpose. # # @return [Types::CreateWorkflowResponse] Returns a {Seahorse::Client::Response response} object which responds to the following methods: # # * {Types::CreateWorkflowResponse#workflow_id #workflow_id} => String # # @example Request syntax with placeholder values # # resp = client.create_workflow({ # description: "WorkflowDescription", # steps: [ # required # { # type: "COPY", # accepts COPY, CUSTOM, TAG, DELETE # copy_step_details: { # name: "WorkflowStepName", # destination_file_location: { # s3_file_location: { # bucket: "S3Bucket", # key: "S3Key", # }, # efs_file_location: { # file_system_id: "EfsFileSystemId", # path: "EfsPath", # }, # }, # overwrite_existing: "TRUE", # accepts TRUE, FALSE # source_file_location: "SourceFileLocation", # }, # custom_step_details: { # name: "WorkflowStepName", # target: "CustomStepTarget", # timeout_seconds: 1, # source_file_location: "SourceFileLocation", # }, # delete_step_details: { # name: "WorkflowStepName", # source_file_location: "SourceFileLocation", # }, # tag_step_details: { # name: "WorkflowStepName", # tags: [ # { # key: "S3TagKey", # required # value: "S3TagValue", # required # }, # ], # source_file_location: "SourceFileLocation", # }, # }, # ], # on_exception_steps: [ # { # type: "COPY", # accepts COPY, CUSTOM, TAG, DELETE # copy_step_details: { # name: "WorkflowStepName", # destination_file_location: { # s3_file_location: { # bucket: "S3Bucket", # key: "S3Key", # }, # efs_file_location: { # file_system_id: "EfsFileSystemId", # path: "EfsPath", # }, # }, # overwrite_existing: "TRUE", # accepts TRUE, FALSE # source_file_location: "SourceFileLocation", # }, # custom_step_details: { # name: "WorkflowStepName", # target: "CustomStepTarget", # timeout_seconds: 1, # source_file_location: "SourceFileLocation", # }, # delete_step_details: { # name: "WorkflowStepName", # source_file_location: "SourceFileLocation", # }, # tag_step_details: { # name: "WorkflowStepName", # tags: [ # { # key: "S3TagKey", # required # value: "S3TagValue", # required # }, # ], # source_file_location: "SourceFileLocation", # }, # }, # ], # tags: [ # { # key: "TagKey", # required # value: "TagValue", # required # }, # ], # }) # # @example Response structure # # resp.workflow_id #=> String # # @see http://docs.aws.amazon.com/goto/WebAPI/transfer-2018-11-05/CreateWorkflow AWS API Documentation # # @overload create_workflow(params = {}) # @param [Hash] params ({}) def create_workflow(params = {}, options = {}) req = build_request(:create_workflow, params) req.send_request(options) end # Allows you to delete the access specified in the `ServerID` and # `ExternalID` parameters. # # @option params [required, String] :server_id # A system-assigned unique identifier for a server that has this user # assigned. # # @option params [required, String] :external_id # A unique identifier that is required to identify specific groups # within your directory. The users of the group that you associate have # access to your Amazon S3 or Amazon EFS resources over the enabled # protocols using Amazon Web Services Transfer Family. If you know the # group name, you can view the SID values by running the following # command using Windows PowerShell. # # `Get-ADGroup -Filter \{samAccountName -like "YourGroupName*"\} # -Properties * | Select SamAccountName,ObjectSid` # # In that command, replace *YourGroupName* with the name of your Active # Directory group. # # The regex used to validate this parameter is a string of characters # consisting of uppercase and lowercase alphanumeric characters with no # spaces. You can also include underscores or any of the following # characters: =,.@:/- # # @return [Struct] Returns an empty {Seahorse::Client::Response response}. # # @example Request syntax with placeholder values # # resp = client.delete_access({ # server_id: "ServerId", # required # external_id: "ExternalId", # required # }) # # @see http://docs.aws.amazon.com/goto/WebAPI/transfer-2018-11-05/DeleteAccess AWS API Documentation # # @overload delete_access(params = {}) # @param [Hash] params ({}) def delete_access(params = {}, options = {}) req = build_request(:delete_access, params) req.send_request(options) end # Deletes the file transfer protocol-enabled server that you specify. # # No response returns from this operation. # # @option params [required, String] :server_id # A unique system-assigned identifier for a server instance. # # @return [Struct] Returns an empty {Seahorse::Client::Response response}. # # @example Request syntax with placeholder values # # resp = client.delete_server({ # server_id: "ServerId", # required # }) # # @see http://docs.aws.amazon.com/goto/WebAPI/transfer-2018-11-05/DeleteServer AWS API Documentation # # @overload delete_server(params = {}) # @param [Hash] params ({}) def delete_server(params = {}, options = {}) req = build_request(:delete_server, params) req.send_request(options) end # Deletes a user's Secure Shell (SSH) public key. # # @option params [required, String] :server_id # A system-assigned unique identifier for a file transfer # protocol-enabled server instance that has the user assigned to it. # # @option params [required, String] :ssh_public_key_id # A unique identifier used to reference your user's specific SSH key. # # @option params [required, String] :user_name # A unique string that identifies a user whose public key is being # deleted. # # @return [Struct] Returns an empty {Seahorse::Client::Response response}. # # @example Request syntax with placeholder values # # resp = client.delete_ssh_public_key({ # server_id: "ServerId", # required # ssh_public_key_id: "SshPublicKeyId", # required # user_name: "UserName", # required # }) # # @see http://docs.aws.amazon.com/goto/WebAPI/transfer-2018-11-05/DeleteSshPublicKey AWS API Documentation # # @overload delete_ssh_public_key(params = {}) # @param [Hash] params ({}) def delete_ssh_public_key(params = {}, options = {}) req = build_request(:delete_ssh_public_key, params) req.send_request(options) end # Deletes the user belonging to a file transfer protocol-enabled server # you specify. # # No response returns from this operation. # # When you delete a user from a server, the user's information is lost. # # # # @option params [required, String] :server_id # A system-assigned unique identifier for a server instance that has the # user assigned to it. # # @option params [required, String] :user_name # A unique string that identifies a user that is being deleted from a # server. # # @return [Struct] Returns an empty {Seahorse::Client::Response response}. # # @example Request syntax with placeholder values # # resp = client.delete_user({ # server_id: "ServerId", # required # user_name: "UserName", # required # }) # # @see http://docs.aws.amazon.com/goto/WebAPI/transfer-2018-11-05/DeleteUser AWS API Documentation # # @overload delete_user(params = {}) # @param [Hash] params ({}) def delete_user(params = {}, options = {}) req = build_request(:delete_user, params) req.send_request(options) end # Deletes the specified workflow. # # @option params [required, String] :workflow_id # A unique identifier for the workflow. # # @return [Struct] Returns an empty {Seahorse::Client::Response response}. # # @example Request syntax with placeholder values # # resp = client.delete_workflow({ # workflow_id: "WorkflowId", # required # }) # # @see http://docs.aws.amazon.com/goto/WebAPI/transfer-2018-11-05/DeleteWorkflow AWS API Documentation # # @overload delete_workflow(params = {}) # @param [Hash] params ({}) def delete_workflow(params = {}, options = {}) req = build_request(:delete_workflow, params) req.send_request(options) end # Describes the access that is assigned to the specific file transfer # protocol-enabled server, as identified by its `ServerId` property and # its `ExternalID`. # # The response from this call returns the properties of the access that # is associated with the `ServerId` value that was specified. # # @option params [required, String] :server_id # A system-assigned unique identifier for a server that has this access # assigned. # # @option params [required, String] :external_id # A unique identifier that is required to identify specific groups # within your directory. The users of the group that you associate have # access to your Amazon S3 or Amazon EFS resources over the enabled # protocols using Amazon Web Services Transfer Family. If you know the # group name, you can view the SID values by running the following # command using Windows PowerShell. # # `Get-ADGroup -Filter \{samAccountName -like "YourGroupName*"\} # -Properties * | Select SamAccountName,ObjectSid` # # In that command, replace *YourGroupName* with the name of your Active # Directory group. # # The regex used to validate this parameter is a string of characters # consisting of uppercase and lowercase alphanumeric characters with no # spaces. You can also include underscores or any of the following # characters: =,.@:/- # # @return [Types::DescribeAccessResponse] Returns a {Seahorse::Client::Response response} object which responds to the following methods: # # * {Types::DescribeAccessResponse#server_id #server_id} => String # * {Types::DescribeAccessResponse#access #access} => Types::DescribedAccess # # @example Request syntax with placeholder values # # resp = client.describe_access({ # server_id: "ServerId", # required # external_id: "ExternalId", # required # }) # # @example Response structure # # resp.server_id #=> String # resp.access.home_directory #=> String # resp.access.home_directory_mappings #=> Array # resp.access.home_directory_mappings[0].entry #=> String # resp.access.home_directory_mappings[0].target #=> String # resp.access.home_directory_type #=> String, one of "PATH", "LOGICAL" # resp.access.policy #=> String # resp.access.posix_profile.uid #=> Integer # resp.access.posix_profile.gid #=> Integer # resp.access.posix_profile.secondary_gids #=> Array # resp.access.posix_profile.secondary_gids[0] #=> Integer # resp.access.role #=> String # resp.access.external_id #=> String # # @see http://docs.aws.amazon.com/goto/WebAPI/transfer-2018-11-05/DescribeAccess AWS API Documentation # # @overload describe_access(params = {}) # @param [Hash] params ({}) def describe_access(params = {}, options = {}) req = build_request(:describe_access, params) req.send_request(options) end # You can use `DescribeExecution` to check the details of the execution # of the specified workflow. # # @option params [required, String] :execution_id # A unique identifier for the execution of a workflow. # # @option params [required, String] :workflow_id # A unique identifier for the workflow. # # @return [Types::DescribeExecutionResponse] Returns a {Seahorse::Client::Response response} object which responds to the following methods: # # * {Types::DescribeExecutionResponse#workflow_id #workflow_id} => String # * {Types::DescribeExecutionResponse#execution #execution} => Types::DescribedExecution # # @example Request syntax with placeholder values # # resp = client.describe_execution({ # execution_id: "ExecutionId", # required # workflow_id: "WorkflowId", # required # }) # # @example Response structure # # resp.workflow_id #=> String # resp.execution.execution_id #=> String # resp.execution.initial_file_location.s3_file_location.bucket #=> String # resp.execution.initial_file_location.s3_file_location.key #=> String # resp.execution.initial_file_location.s3_file_location.version_id #=> String # resp.execution.initial_file_location.s3_file_location.etag #=> String # resp.execution.initial_file_location.efs_file_location.file_system_id #=> String # resp.execution.initial_file_location.efs_file_location.path #=> String # resp.execution.service_metadata.user_details.user_name #=> String # resp.execution.service_metadata.user_details.server_id #=> String # resp.execution.service_metadata.user_details.session_id #=> String # resp.execution.execution_role #=> String # resp.execution.logging_configuration.logging_role #=> String # resp.execution.logging_configuration.log_group_name #=> String # resp.execution.posix_profile.uid #=> Integer # resp.execution.posix_profile.gid #=> Integer # resp.execution.posix_profile.secondary_gids #=> Array # resp.execution.posix_profile.secondary_gids[0] #=> Integer # resp.execution.status #=> String, one of "IN_PROGRESS", "COMPLETED", "EXCEPTION", "HANDLING_EXCEPTION" # resp.execution.results.steps #=> Array # resp.execution.results.steps[0].step_type #=> String, one of "COPY", "CUSTOM", "TAG", "DELETE" # resp.execution.results.steps[0].outputs #=> String # resp.execution.results.steps[0].error.type #=> String, one of "PERMISSION_DENIED", "CUSTOM_STEP_FAILED", "THROTTLED", "ALREADY_EXISTS", "NOT_FOUND", "BAD_REQUEST", "TIMEOUT", "INTERNAL_SERVER_ERROR" # resp.execution.results.steps[0].error.message #=> String # resp.execution.results.on_exception_steps #=> Array # resp.execution.results.on_exception_steps[0].step_type #=> String, one of "COPY", "CUSTOM", "TAG", "DELETE" # resp.execution.results.on_exception_steps[0].outputs #=> String # resp.execution.results.on_exception_steps[0].error.type #=> String, one of "PERMISSION_DENIED", "CUSTOM_STEP_FAILED", "THROTTLED", "ALREADY_EXISTS", "NOT_FOUND", "BAD_REQUEST", "TIMEOUT", "INTERNAL_SERVER_ERROR" # resp.execution.results.on_exception_steps[0].error.message #=> String # # @see http://docs.aws.amazon.com/goto/WebAPI/transfer-2018-11-05/DescribeExecution AWS API Documentation # # @overload describe_execution(params = {}) # @param [Hash] params ({}) def describe_execution(params = {}, options = {}) req = build_request(:describe_execution, params) req.send_request(options) end # Describes the security policy that is attached to your file transfer # protocol-enabled server. The response contains a description of the # security policy's properties. For more information about security # policies, see [Working with security policies][1]. # # # # [1]: https://docs.aws.amazon.com/transfer/latest/userguide/security-policies.html # # @option params [required, String] :security_policy_name # Specifies the name of the security policy that is attached to the # server. # # @return [Types::DescribeSecurityPolicyResponse] Returns a {Seahorse::Client::Response response} object which responds to the following methods: # # * {Types::DescribeSecurityPolicyResponse#security_policy #security_policy} => Types::DescribedSecurityPolicy # # @example Request syntax with placeholder values # # resp = client.describe_security_policy({ # security_policy_name: "SecurityPolicyName", # required # }) # # @example Response structure # # resp.security_policy.fips #=> Boolean # resp.security_policy.security_policy_name #=> String # resp.security_policy.ssh_ciphers #=> Array # resp.security_policy.ssh_ciphers[0] #=> String # resp.security_policy.ssh_kexs #=> Array # resp.security_policy.ssh_kexs[0] #=> String # resp.security_policy.ssh_macs #=> Array # resp.security_policy.ssh_macs[0] #=> String # resp.security_policy.tls_ciphers #=> Array # resp.security_policy.tls_ciphers[0] #=> String # # @see http://docs.aws.amazon.com/goto/WebAPI/transfer-2018-11-05/DescribeSecurityPolicy AWS API Documentation # # @overload describe_security_policy(params = {}) # @param [Hash] params ({}) def describe_security_policy(params = {}, options = {}) req = build_request(:describe_security_policy, params) req.send_request(options) end # Describes a file transfer protocol-enabled server that you specify by # passing the `ServerId` parameter. # # The response contains a description of a server's properties. When # you set `EndpointType` to VPC, the response will contain the # `EndpointDetails`. # # @option params [required, String] :server_id # A system-assigned unique identifier for a server. # # @return [Types::DescribeServerResponse] Returns a {Seahorse::Client::Response response} object which responds to the following methods: # # * {Types::DescribeServerResponse#server #server} => Types::DescribedServer # # @example Request syntax with placeholder values # # resp = client.describe_server({ # server_id: "ServerId", # required # }) # # @example Response structure # # resp.server.arn #=> String # resp.server.certificate #=> String # resp.server.protocol_details.passive_ip #=> String # resp.server.protocol_details.tls_session_resumption_mode #=> String, one of "DISABLED", "ENABLED", "ENFORCED" # resp.server.domain #=> String, one of "S3", "EFS" # resp.server.endpoint_details.address_allocation_ids #=> Array # resp.server.endpoint_details.address_allocation_ids[0] #=> String # resp.server.endpoint_details.subnet_ids #=> Array # resp.server.endpoint_details.subnet_ids[0] #=> String # resp.server.endpoint_details.vpc_endpoint_id #=> String # resp.server.endpoint_details.vpc_id #=> String # resp.server.endpoint_details.security_group_ids #=> Array # resp.server.endpoint_details.security_group_ids[0] #=> String # resp.server.endpoint_type #=> String, one of "PUBLIC", "VPC", "VPC_ENDPOINT" # resp.server.host_key_fingerprint #=> String # resp.server.identity_provider_details.url #=> String # resp.server.identity_provider_details.invocation_role #=> String # resp.server.identity_provider_details.directory_id #=> String # resp.server.identity_provider_details.function #=> String # resp.server.identity_provider_type #=> String, one of "SERVICE_MANAGED", "API_GATEWAY", "AWS_DIRECTORY_SERVICE", "AWS_LAMBDA" # resp.server.logging_role #=> String # resp.server.post_authentication_login_banner #=> String # resp.server.pre_authentication_login_banner #=> String # resp.server.protocols #=> Array # resp.server.protocols[0] #=> String, one of "SFTP", "FTP", "FTPS" # resp.server.security_policy_name #=> String # resp.server.server_id #=> String # resp.server.state #=> String, one of "OFFLINE", "ONLINE", "STARTING", "STOPPING", "START_FAILED", "STOP_FAILED" # resp.server.tags #=> Array # resp.server.tags[0].key #=> String # resp.server.tags[0].value #=> String # resp.server.user_count #=> Integer # resp.server.workflow_details.on_upload #=> Array # resp.server.workflow_details.on_upload[0].workflow_id #=> String # resp.server.workflow_details.on_upload[0].execution_role #=> String # # # The following waiters are defined for this operation (see {Client#wait_until} for detailed usage): # # * server_offline # * server_online # # @see http://docs.aws.amazon.com/goto/WebAPI/transfer-2018-11-05/DescribeServer AWS API Documentation # # @overload describe_server(params = {}) # @param [Hash] params ({}) def describe_server(params = {}, options = {}) req = build_request(:describe_server, params) req.send_request(options) end # Describes the user assigned to the specific file transfer # protocol-enabled server, as identified by its `ServerId` property. # # The response from this call returns the properties of the user # associated with the `ServerId` value that was specified. # # @option params [required, String] :server_id # A system-assigned unique identifier for a server that has this user # assigned. # # @option params [required, String] :user_name # The name of the user assigned to one or more servers. User names are # part of the sign-in credentials to use the Amazon Web Services # Transfer Family service and perform file transfer tasks. # # @return [Types::DescribeUserResponse] Returns a {Seahorse::Client::Response response} object which responds to the following methods: # # * {Types::DescribeUserResponse#server_id #server_id} => String # * {Types::DescribeUserResponse#user #user} => Types::DescribedUser # # @example Request syntax with placeholder values # # resp = client.describe_user({ # server_id: "ServerId", # required # user_name: "UserName", # required # }) # # @example Response structure # # resp.server_id #=> String # resp.user.arn #=> String # resp.user.home_directory #=> String # resp.user.home_directory_mappings #=> Array # resp.user.home_directory_mappings[0].entry #=> String # resp.user.home_directory_mappings[0].target #=> String # resp.user.home_directory_type #=> String, one of "PATH", "LOGICAL" # resp.user.policy #=> String # resp.user.posix_profile.uid #=> Integer # resp.user.posix_profile.gid #=> Integer # resp.user.posix_profile.secondary_gids #=> Array # resp.user.posix_profile.secondary_gids[0] #=> Integer # resp.user.role #=> String # resp.user.ssh_public_keys #=> Array # resp.user.ssh_public_keys[0].date_imported #=> Time # resp.user.ssh_public_keys[0].ssh_public_key_body #=> String # resp.user.ssh_public_keys[0].ssh_public_key_id #=> String # resp.user.tags #=> Array # resp.user.tags[0].key #=> String # resp.user.tags[0].value #=> String # resp.user.user_name #=> String # # @see http://docs.aws.amazon.com/goto/WebAPI/transfer-2018-11-05/DescribeUser AWS API Documentation # # @overload describe_user(params = {}) # @param [Hash] params ({}) def describe_user(params = {}, options = {}) req = build_request(:describe_user, params) req.send_request(options) end # Describes the specified workflow. # # @option params [required, String] :workflow_id # A unique identifier for the workflow. # # @return [Types::DescribeWorkflowResponse] Returns a {Seahorse::Client::Response response} object which responds to the following methods: # # * {Types::DescribeWorkflowResponse#workflow #workflow} => Types::DescribedWorkflow # # @example Request syntax with placeholder values # # resp = client.describe_workflow({ # workflow_id: "WorkflowId", # required # }) # # @example Response structure # # resp.workflow.arn #=> String # resp.workflow.description #=> String # resp.workflow.steps #=> Array # resp.workflow.steps[0].type #=> String, one of "COPY", "CUSTOM", "TAG", "DELETE" # resp.workflow.steps[0].copy_step_details.name #=> String # resp.workflow.steps[0].copy_step_details.destination_file_location.s3_file_location.bucket #=> String # resp.workflow.steps[0].copy_step_details.destination_file_location.s3_file_location.key #=> String # resp.workflow.steps[0].copy_step_details.destination_file_location.efs_file_location.file_system_id #=> String # resp.workflow.steps[0].copy_step_details.destination_file_location.efs_file_location.path #=> String # resp.workflow.steps[0].copy_step_details.overwrite_existing #=> String, one of "TRUE", "FALSE" # resp.workflow.steps[0].copy_step_details.source_file_location #=> String # resp.workflow.steps[0].custom_step_details.name #=> String # resp.workflow.steps[0].custom_step_details.target #=> String # resp.workflow.steps[0].custom_step_details.timeout_seconds #=> Integer # resp.workflow.steps[0].custom_step_details.source_file_location #=> String # resp.workflow.steps[0].delete_step_details.name #=> String # resp.workflow.steps[0].delete_step_details.source_file_location #=> String # resp.workflow.steps[0].tag_step_details.name #=> String # resp.workflow.steps[0].tag_step_details.tags #=> Array # resp.workflow.steps[0].tag_step_details.tags[0].key #=> String # resp.workflow.steps[0].tag_step_details.tags[0].value #=> String # resp.workflow.steps[0].tag_step_details.source_file_location #=> String # resp.workflow.on_exception_steps #=> Array # resp.workflow.on_exception_steps[0].type #=> String, one of "COPY", "CUSTOM", "TAG", "DELETE" # resp.workflow.on_exception_steps[0].copy_step_details.name #=> String # resp.workflow.on_exception_steps[0].copy_step_details.destination_file_location.s3_file_location.bucket #=> String # resp.workflow.on_exception_steps[0].copy_step_details.destination_file_location.s3_file_location.key #=> String # resp.workflow.on_exception_steps[0].copy_step_details.destination_file_location.efs_file_location.file_system_id #=> String # resp.workflow.on_exception_steps[0].copy_step_details.destination_file_location.efs_file_location.path #=> String # resp.workflow.on_exception_steps[0].copy_step_details.overwrite_existing #=> String, one of "TRUE", "FALSE" # resp.workflow.on_exception_steps[0].copy_step_details.source_file_location #=> String # resp.workflow.on_exception_steps[0].custom_step_details.name #=> String # resp.workflow.on_exception_steps[0].custom_step_details.target #=> String # resp.workflow.on_exception_steps[0].custom_step_details.timeout_seconds #=> Integer # resp.workflow.on_exception_steps[0].custom_step_details.source_file_location #=> String # resp.workflow.on_exception_steps[0].delete_step_details.name #=> String # resp.workflow.on_exception_steps[0].delete_step_details.source_file_location #=> String # resp.workflow.on_exception_steps[0].tag_step_details.name #=> String # resp.workflow.on_exception_steps[0].tag_step_details.tags #=> Array # resp.workflow.on_exception_steps[0].tag_step_details.tags[0].key #=> String # resp.workflow.on_exception_steps[0].tag_step_details.tags[0].value #=> String # resp.workflow.on_exception_steps[0].tag_step_details.source_file_location #=> String # resp.workflow.workflow_id #=> String # resp.workflow.tags #=> Array # resp.workflow.tags[0].key #=> String # resp.workflow.tags[0].value #=> String # # @see http://docs.aws.amazon.com/goto/WebAPI/transfer-2018-11-05/DescribeWorkflow AWS API Documentation # # @overload describe_workflow(params = {}) # @param [Hash] params ({}) def describe_workflow(params = {}, options = {}) req = build_request(:describe_workflow, params) req.send_request(options) end # Adds a Secure Shell (SSH) public key to a user account identified by a # `UserName` value assigned to the specific file transfer # protocol-enabled server, identified by `ServerId`. # # The response returns the `UserName` value, the `ServerId` value, and # the name of the `SshPublicKeyId`. # # @option params [required, String] :server_id # A system-assigned unique identifier for a server. # # @option params [required, String] :ssh_public_key_body # The public key portion of an SSH key pair. # # @option params [required, String] :user_name # The name of the user account that is assigned to one or more servers. # # @return [Types::ImportSshPublicKeyResponse] Returns a {Seahorse::Client::Response response} object which responds to the following methods: # # * {Types::ImportSshPublicKeyResponse#server_id #server_id} => String # * {Types::ImportSshPublicKeyResponse#ssh_public_key_id #ssh_public_key_id} => String # * {Types::ImportSshPublicKeyResponse#user_name #user_name} => String # # @example Request syntax with placeholder values # # resp = client.import_ssh_public_key({ # server_id: "ServerId", # required # ssh_public_key_body: "SshPublicKeyBody", # required # user_name: "UserName", # required # }) # # @example Response structure # # resp.server_id #=> String # resp.ssh_public_key_id #=> String # resp.user_name #=> String # # @see http://docs.aws.amazon.com/goto/WebAPI/transfer-2018-11-05/ImportSshPublicKey AWS API Documentation # # @overload import_ssh_public_key(params = {}) # @param [Hash] params ({}) def import_ssh_public_key(params = {}, options = {}) req = build_request(:import_ssh_public_key, params) req.send_request(options) end # Lists the details for all the accesses you have on your server. # # @option params [Integer] :max_results # Specifies the maximum number of access SIDs to return. # # @option params [String] :next_token # When you can get additional results from the `ListAccesses` call, a # `NextToken` parameter is returned in the output. You can then pass in # a subsequent command to the `NextToken` parameter to continue listing # additional accesses. # # @option params [required, String] :server_id # A system-assigned unique identifier for a server that has users # assigned to it. # # @return [Types::ListAccessesResponse] Returns a {Seahorse::Client::Response response} object which responds to the following methods: # # * {Types::ListAccessesResponse#next_token #next_token} => String # * {Types::ListAccessesResponse#server_id #server_id} => String # * {Types::ListAccessesResponse#accesses #accesses} => Array<Types::ListedAccess> # # The returned {Seahorse::Client::Response response} is a pageable response and is Enumerable. For details on usage see {Aws::PageableResponse PageableResponse}. # # @example Request syntax with placeholder values # # resp = client.list_accesses({ # max_results: 1, # next_token: "NextToken", # server_id: "ServerId", # required # }) # # @example Response structure # # resp.next_token #=> String # resp.server_id #=> String # resp.accesses #=> Array # resp.accesses[0].home_directory #=> String # resp.accesses[0].home_directory_type #=> String, one of "PATH", "LOGICAL" # resp.accesses[0].role #=> String # resp.accesses[0].external_id #=> String # # @see http://docs.aws.amazon.com/goto/WebAPI/transfer-2018-11-05/ListAccesses AWS API Documentation # # @overload list_accesses(params = {}) # @param [Hash] params ({}) def list_accesses(params = {}, options = {}) req = build_request(:list_accesses, params) req.send_request(options) end # Lists all executions for the specified workflow. # # @option params [Integer] :max_results # Specifies the aximum number of executions to return. # # @option params [String] :next_token # `ListExecutions` returns the `NextToken` parameter in the output. You # can then pass the `NextToken` parameter in a subsequent command to # continue listing additional executions. # # This is useful for pagination, for instance. If you have 100 # executions for a workflow, you might only want to list first 10. If # so, callthe API by specifing the `max-results`\: # # `aws transfer list-executions --max-results 10` # # This returns details for the first 10 executions, as well as the # pointer (`NextToken`) to the eleventh execution. You can now call the # API again, suppling the `NextToken` value you received: # # `aws transfer list-executions --max-results 10 --next-token # $somePointerReturnedFromPreviousListResult` # # This call returns the next 10 executions, the 11th through the 20th. # You can then repeat the call until the details for all 100 executions # have been returned. # # @option params [required, String] :workflow_id # A unique identifier for the workflow. # # @return [Types::ListExecutionsResponse] Returns a {Seahorse::Client::Response response} object which responds to the following methods: # # * {Types::ListExecutionsResponse#next_token #next_token} => String # * {Types::ListExecutionsResponse#workflow_id #workflow_id} => String # * {Types::ListExecutionsResponse#executions #executions} => Array<Types::ListedExecution> # # The returned {Seahorse::Client::Response response} is a pageable response and is Enumerable. For details on usage see {Aws::PageableResponse PageableResponse}. # # @example Request syntax with placeholder values # # resp = client.list_executions({ # max_results: 1, # next_token: "NextToken", # workflow_id: "WorkflowId", # required # }) # # @example Response structure # # resp.next_token #=> String # resp.workflow_id #=> String # resp.executions #=> Array # resp.executions[0].execution_id #=> String # resp.executions[0].initial_file_location.s3_file_location.bucket #=> String # resp.executions[0].initial_file_location.s3_file_location.key #=> String # resp.executions[0].initial_file_location.s3_file_location.version_id #=> String # resp.executions[0].initial_file_location.s3_file_location.etag #=> String # resp.executions[0].initial_file_location.efs_file_location.file_system_id #=> String # resp.executions[0].initial_file_location.efs_file_location.path #=> String # resp.executions[0].service_metadata.user_details.user_name #=> String # resp.executions[0].service_metadata.user_details.server_id #=> String # resp.executions[0].service_metadata.user_details.session_id #=> String # resp.executions[0].status #=> String, one of "IN_PROGRESS", "COMPLETED", "EXCEPTION", "HANDLING_EXCEPTION" # # @see http://docs.aws.amazon.com/goto/WebAPI/transfer-2018-11-05/ListExecutions AWS API Documentation # # @overload list_executions(params = {}) # @param [Hash] params ({}) def list_executions(params = {}, options = {}) req = build_request(:list_executions, params) req.send_request(options) end # Lists the security policies that are attached to your file transfer # protocol-enabled servers. # # @option params [Integer] :max_results # Specifies the number of security policies to return as a response to # the `ListSecurityPolicies` query. # # @option params [String] :next_token # When additional results are obtained from the `ListSecurityPolicies` # command, a `NextToken` parameter is returned in the output. You can # then pass the `NextToken` parameter in a subsequent command to # continue listing additional security policies. # # @return [Types::ListSecurityPoliciesResponse] Returns a {Seahorse::Client::Response response} object which responds to the following methods: # # * {Types::ListSecurityPoliciesResponse#next_token #next_token} => String # * {Types::ListSecurityPoliciesResponse#security_policy_names #security_policy_names} => Array<String> # # The returned {Seahorse::Client::Response response} is a pageable response and is Enumerable. For details on usage see {Aws::PageableResponse PageableResponse}. # # @example Request syntax with placeholder values # # resp = client.list_security_policies({ # max_results: 1, # next_token: "NextToken", # }) # # @example Response structure # # resp.next_token #=> String # resp.security_policy_names #=> Array # resp.security_policy_names[0] #=> String # # @see http://docs.aws.amazon.com/goto/WebAPI/transfer-2018-11-05/ListSecurityPolicies AWS API Documentation # # @overload list_security_policies(params = {}) # @param [Hash] params ({}) def list_security_policies(params = {}, options = {}) req = build_request(:list_security_policies, params) req.send_request(options) end # Lists the file transfer protocol-enabled servers that are associated # with your Amazon Web Services account. # # @option params [Integer] :max_results # Specifies the number of servers to return as a response to the # `ListServers` query. # # @option params [String] :next_token # When additional results are obtained from the `ListServers` command, a # `NextToken` parameter is returned in the output. You can then pass the # `NextToken` parameter in a subsequent command to continue listing # additional servers. # # @return [Types::ListServersResponse] Returns a {Seahorse::Client::Response response} object which responds to the following methods: # # * {Types::ListServersResponse#next_token #next_token} => String # * {Types::ListServersResponse#servers #servers} => Array<Types::ListedServer> # # The returned {Seahorse::Client::Response response} is a pageable response and is Enumerable. For details on usage see {Aws::PageableResponse PageableResponse}. # # @example Request syntax with placeholder values # # resp = client.list_servers({ # max_results: 1, # next_token: "NextToken", # }) # # @example Response structure # # resp.next_token #=> String # resp.servers #=> Array # resp.servers[0].arn #=> String # resp.servers[0].domain #=> String, one of "S3", "EFS" # resp.servers[0].identity_provider_type #=> String, one of "SERVICE_MANAGED", "API_GATEWAY", "AWS_DIRECTORY_SERVICE", "AWS_LAMBDA" # resp.servers[0].endpoint_type #=> String, one of "PUBLIC", "VPC", "VPC_ENDPOINT" # resp.servers[0].logging_role #=> String # resp.servers[0].server_id #=> String # resp.servers[0].state #=> String, one of "OFFLINE", "ONLINE", "STARTING", "STOPPING", "START_FAILED", "STOP_FAILED" # resp.servers[0].user_count #=> Integer # # @see http://docs.aws.amazon.com/goto/WebAPI/transfer-2018-11-05/ListServers AWS API Documentation # # @overload list_servers(params = {}) # @param [Hash] params ({}) def list_servers(params = {}, options = {}) req = build_request(:list_servers, params) req.send_request(options) end # Lists all of the tags associated with the Amazon Resource Name (ARN) # that you specify. The resource can be a user, server, or role. # # @option params [required, String] :arn # Requests the tags associated with a particular Amazon Resource Name # (ARN). An ARN is an identifier for a specific Amazon Web Services # resource, such as a server, user, or role. # # @option params [Integer] :max_results # Specifies the number of tags to return as a response to the # `ListTagsForResource` request. # # @option params [String] :next_token # When you request additional results from the `ListTagsForResource` # operation, a `NextToken` parameter is returned in the input. You can # then pass in a subsequent command to the `NextToken` parameter to # continue listing additional tags. # # @return [Types::ListTagsForResourceResponse] Returns a {Seahorse::Client::Response response} object which responds to the following methods: # # * {Types::ListTagsForResourceResponse#arn #arn} => String # * {Types::ListTagsForResourceResponse#next_token #next_token} => String # * {Types::ListTagsForResourceResponse#tags #tags} => Array<Types::Tag> # # The returned {Seahorse::Client::Response response} is a pageable response and is Enumerable. For details on usage see {Aws::PageableResponse PageableResponse}. # # @example Request syntax with placeholder values # # resp = client.list_tags_for_resource({ # arn: "Arn", # required # max_results: 1, # next_token: "NextToken", # }) # # @example Response structure # # resp.arn #=> String # resp.next_token #=> String # resp.tags #=> Array # resp.tags[0].key #=> String # resp.tags[0].value #=> String # # @see http://docs.aws.amazon.com/goto/WebAPI/transfer-2018-11-05/ListTagsForResource AWS API Documentation # # @overload list_tags_for_resource(params = {}) # @param [Hash] params ({}) def list_tags_for_resource(params = {}, options = {}) req = build_request(:list_tags_for_resource, params) req.send_request(options) end # Lists the users for a file transfer protocol-enabled server that you # specify by passing the `ServerId` parameter. # # @option params [Integer] :max_results # Specifies the number of users to return as a response to the # `ListUsers` request. # # @option params [String] :next_token # When you can get additional results from the `ListUsers` call, a # `NextToken` parameter is returned in the output. You can then pass in # a subsequent command to the `NextToken` parameter to continue listing # additional users. # # @option params [required, String] :server_id # A system-assigned unique identifier for a server that has users # assigned to it. # # @return [Types::ListUsersResponse] Returns a {Seahorse::Client::Response response} object which responds to the following methods: # # * {Types::ListUsersResponse#next_token #next_token} => String # * {Types::ListUsersResponse#server_id #server_id} => String # * {Types::ListUsersResponse#users #users} => Array<Types::ListedUser> # # The returned {Seahorse::Client::Response response} is a pageable response and is Enumerable. For details on usage see {Aws::PageableResponse PageableResponse}. # # @example Request syntax with placeholder values # # resp = client.list_users({ # max_results: 1, # next_token: "NextToken", # server_id: "ServerId", # required # }) # # @example Response structure # # resp.next_token #=> String # resp.server_id #=> String # resp.users #=> Array # resp.users[0].arn #=> String # resp.users[0].home_directory #=> String # resp.users[0].home_directory_type #=> String, one of "PATH", "LOGICAL" # resp.users[0].role #=> String # resp.users[0].ssh_public_key_count #=> Integer # resp.users[0].user_name #=> String # # @see http://docs.aws.amazon.com/goto/WebAPI/transfer-2018-11-05/ListUsers AWS API Documentation # # @overload list_users(params = {}) # @param [Hash] params ({}) def list_users(params = {}, options = {}) req = build_request(:list_users, params) req.send_request(options) end # Lists all of your workflows. # # @option params [Integer] :max_results # Specifies the maximum number of workflows to return. # # @option params [String] :next_token # `ListWorkflows` returns the `NextToken` parameter in the output. You # can then pass the `NextToken` parameter in a subsequent command to # continue listing additional workflows. # # @return [Types::ListWorkflowsResponse] Returns a {Seahorse::Client::Response response} object which responds to the following methods: # # * {Types::ListWorkflowsResponse#next_token #next_token} => String # * {Types::ListWorkflowsResponse#workflows #workflows} => Array<Types::ListedWorkflow> # # The returned {Seahorse::Client::Response response} is a pageable response and is Enumerable. For details on usage see {Aws::PageableResponse PageableResponse}. # # @example Request syntax with placeholder values # # resp = client.list_workflows({ # max_results: 1, # next_token: "NextToken", # }) # # @example Response structure # # resp.next_token #=> String # resp.workflows #=> Array # resp.workflows[0].workflow_id #=> String # resp.workflows[0].description #=> String # resp.workflows[0].arn #=> String # # @see http://docs.aws.amazon.com/goto/WebAPI/transfer-2018-11-05/ListWorkflows AWS API Documentation # # @overload list_workflows(params = {}) # @param [Hash] params ({}) def list_workflows(params = {}, options = {}) req = build_request(:list_workflows, params) req.send_request(options) end # Sends a callback for asynchronous custom steps. # # The `ExecutionId`, `WorkflowId`, and `Token` are passed to the target # resource during execution of a custom step of a workflow. You must # include those with their callback as well as providing a status. # # @option params [required, String] :workflow_id # A unique identifier for the workflow. # # @option params [required, String] :execution_id # A unique identifier for the execution of a workflow. # # @option params [required, String] :token # Used to distinguish between multiple callbacks for multiple Lambda # steps within the same execution. # # @option params [required, String] :status # Indicates whether the specified step succeeded or failed. # # @return [Struct] Returns an empty {Seahorse::Client::Response response}. # # @example Request syntax with placeholder values # # resp = client.send_workflow_step_state({ # workflow_id: "WorkflowId", # required # execution_id: "ExecutionId", # required # token: "CallbackToken", # required # status: "SUCCESS", # required, accepts SUCCESS, FAILURE # }) # # @see http://docs.aws.amazon.com/goto/WebAPI/transfer-2018-11-05/SendWorkflowStepState AWS API Documentation # # @overload send_workflow_step_state(params = {}) # @param [Hash] params ({}) def send_workflow_step_state(params = {}, options = {}) req = build_request(:send_workflow_step_state, params) req.send_request(options) end # Changes the state of a file transfer protocol-enabled server from # `OFFLINE` to `ONLINE`. It has no impact on a server that is already # `ONLINE`. An `ONLINE` server can accept and process file transfer # jobs. # # The state of `STARTING` indicates that the server is in an # intermediate state, either not fully able to respond, or not fully # online. The values of `START_FAILED` can indicate an error condition. # # No response is returned from this call. # # @option params [required, String] :server_id # A system-assigned unique identifier for a server that you start. # # @return [Struct] Returns an empty {Seahorse::Client::Response response}. # # @example Request syntax with placeholder values # # resp = client.start_server({ # server_id: "ServerId", # required # }) # # @see http://docs.aws.amazon.com/goto/WebAPI/transfer-2018-11-05/StartServer AWS API Documentation # # @overload start_server(params = {}) # @param [Hash] params ({}) def start_server(params = {}, options = {}) req = build_request(:start_server, params) req.send_request(options) end # Changes the state of a file transfer protocol-enabled server from # `ONLINE` to `OFFLINE`. An `OFFLINE` server cannot accept and process # file transfer jobs. Information tied to your server, such as server # and user properties, are not affected by stopping your server. # # Stopping the server will not reduce or impact your file transfer # protocol endpoint billing; you must delete the server to stop being # billed. # # # # The state of `STOPPING` indicates that the server is in an # intermediate state, either not fully able to respond, or not fully # offline. The values of `STOP_FAILED` can indicate an error condition. # # No response is returned from this call. # # @option params [required, String] :server_id # A system-assigned unique identifier for a server that you stopped. # # @return [Struct] Returns an empty {Seahorse::Client::Response response}. # # @example Request syntax with placeholder values # # resp = client.stop_server({ # server_id: "ServerId", # required # }) # # @see http://docs.aws.amazon.com/goto/WebAPI/transfer-2018-11-05/StopServer AWS API Documentation # # @overload stop_server(params = {}) # @param [Hash] params ({}) def stop_server(params = {}, options = {}) req = build_request(:stop_server, params) req.send_request(options) end # Attaches a key-value pair to a resource, as identified by its Amazon # Resource Name (ARN). Resources are users, servers, roles, and other # entities. # # There is no response returned from this call. # # @option params [required, String] :arn # An Amazon Resource Name (ARN) for a specific Amazon Web Services # resource, such as a server, user, or role. # # @option params [required, Array] :tags # Key-value pairs assigned to ARNs that you can use to group and search # for resources by type. You can attach this metadata to user accounts # for any purpose. # # @return [Struct] Returns an empty {Seahorse::Client::Response response}. # # @example Request syntax with placeholder values # # resp = client.tag_resource({ # arn: "Arn", # required # tags: [ # required # { # key: "TagKey", # required # value: "TagValue", # required # }, # ], # }) # # @see http://docs.aws.amazon.com/goto/WebAPI/transfer-2018-11-05/TagResource AWS API Documentation # # @overload tag_resource(params = {}) # @param [Hash] params ({}) def tag_resource(params = {}, options = {}) req = build_request(:tag_resource, params) req.send_request(options) end # If the `IdentityProviderType` of a file transfer protocol-enabled # server is `AWS_DIRECTORY_SERVICE` or `API_Gateway`, tests whether your # identity provider is set up successfully. We highly recommend that you # call this operation to test your authentication method as soon as you # create your server. By doing so, you can troubleshoot issues with the # identity provider integration to ensure that your users can # successfully use the service. # # The `ServerId` and `UserName` parameters are required. The # `ServerProtocol`, `SourceIp`, and `UserPassword` are all optional. # # You cannot use `TestIdentityProvider` if the `IdentityProviderType` of # your server is `SERVICE_MANAGED`. # # # # * If you provide any incorrect values for any parameters, the # `Response` field is empty. # # * If you provide a server ID for a server that uses service-managed # users, you get an error: # # ` An error occurred (InvalidRequestException) when calling the # TestIdentityProvider operation: s-server-ID not configured for # external auth ` # # * If you enter a Server ID for the `--server-id` parameter that does # not identify an actual Transfer server, you receive the following # error: # # `An error occurred (ResourceNotFoundException) when calling the # TestIdentityProvider operation: Unknown server` # # @option params [required, String] :server_id # A system-assigned identifier for a specific server. That server's # user authentication method is tested with a user name and password. # # @option params [String] :server_protocol # The type of file transfer protocol to be tested. # # The available protocols are: # # * Secure Shell (SSH) File Transfer Protocol (SFTP) # # * File Transfer Protocol Secure (FTPS) # # * File Transfer Protocol (FTP) # # @option params [String] :source_ip # The source IP address of the user account to be tested. # # @option params [required, String] :user_name # The name of the user account to be tested. # # @option params [String] :user_password # The password of the user account to be tested. # # @return [Types::TestIdentityProviderResponse] Returns a {Seahorse::Client::Response response} object which responds to the following methods: # # * {Types::TestIdentityProviderResponse#response #response} => String # * {Types::TestIdentityProviderResponse#status_code #status_code} => Integer # * {Types::TestIdentityProviderResponse#message #message} => String # * {Types::TestIdentityProviderResponse#url #url} => String # # @example Request syntax with placeholder values # # resp = client.test_identity_provider({ # server_id: "ServerId", # required # server_protocol: "SFTP", # accepts SFTP, FTP, FTPS # source_ip: "SourceIp", # user_name: "UserName", # required # user_password: "UserPassword", # }) # # @example Response structure # # resp.response #=> String # resp.status_code #=> Integer # resp.message #=> String # resp.url #=> String # # @see http://docs.aws.amazon.com/goto/WebAPI/transfer-2018-11-05/TestIdentityProvider AWS API Documentation # # @overload test_identity_provider(params = {}) # @param [Hash] params ({}) def test_identity_provider(params = {}, options = {}) req = build_request(:test_identity_provider, params) req.send_request(options) end # Detaches a key-value pair from a resource, as identified by its Amazon # Resource Name (ARN). Resources are users, servers, roles, and other # entities. # # No response is returned from this call. # # @option params [required, String] :arn # The value of the resource that will have the tag removed. An Amazon # Resource Name (ARN) is an identifier for a specific Amazon Web # Services resource, such as a server, user, or role. # # @option params [required, Array] :tag_keys # TagKeys are key-value pairs assigned to ARNs that can be used to group # and search for resources by type. This metadata can be attached to # resources for any purpose. # # @return [Struct] Returns an empty {Seahorse::Client::Response response}. # # @example Request syntax with placeholder values # # resp = client.untag_resource({ # arn: "Arn", # required # tag_keys: ["TagKey"], # required # }) # # @see http://docs.aws.amazon.com/goto/WebAPI/transfer-2018-11-05/UntagResource AWS API Documentation # # @overload untag_resource(params = {}) # @param [Hash] params ({}) def untag_resource(params = {}, options = {}) req = build_request(:untag_resource, params) req.send_request(options) end # Allows you to update parameters for the access specified in the # `ServerID` and `ExternalID` parameters. # # @option params [String] :home_directory # The landing directory (folder) for a user when they log in to the # server using the client. # # A `HomeDirectory` example is `/bucket_name/home/mydirectory`. # # @option params [String] :home_directory_type # The type of landing directory (folder) you want your users' home # directory to be when they log into the server. If you set it to # `PATH`, the user will see the absolute Amazon S3 bucket or EFS paths # as is in their file transfer protocol clients. If you set it # `LOGICAL`, you need to provide mappings in the `HomeDirectoryMappings` # for how you want to make Amazon S3 or EFS paths visible to your users. # # @option params [Array] :home_directory_mappings # Logical directory mappings that specify what Amazon S3 or Amazon EFS # paths and keys should be visible to your user and how you want to make # them visible. You must specify the `Entry` and `Target` pair, where # `Entry` shows how the path is made visible and `Target` is the actual # Amazon S3 or Amazon EFS path. If you only specify a target, it is # displayed as is. You also must ensure that your Amazon Web Services # Identity and Access Management (IAM) role provides access to paths in # `Target`. This value can only be set when `HomeDirectoryType` is set # to *LOGICAL*. # # The following is an `Entry` and `Target` pair example. # # `[ \{ "Entry": "/directory1", "Target": # "/bucket_name/home/mydirectory" \} ]` # # In most cases, you can use this value instead of the session policy to # lock down your user to the designated home directory ("`chroot`"). # To do this, you can set `Entry` to `/` and set `Target` to the # `HomeDirectory` parameter value. # # The following is an `Entry` and `Target` pair example for `chroot`. # # `[ \{ "Entry": "/", "Target": "/bucket_name/home/mydirectory" \} ]` # # @option params [String] :policy # A session policy for your user so that you can use the same IAM role # across multiple users. This policy scopes down user access to portions # of their Amazon S3 bucket. Variables that you can use inside this # policy include `$\{Transfer:UserName\}`, # `$\{Transfer:HomeDirectory\}`, and `$\{Transfer:HomeBucket\}`. # # This only applies when the domain of `ServerId` is S3. EFS does not # use session policies. # # For session policies, Amazon Web Services Transfer Family stores the # policy as a JSON blob, instead of the Amazon Resource Name (ARN) of # the policy. You save the policy as a JSON blob and pass it in the # `Policy` argument. # # For an example of a session policy, see [Example session policy][1]. # # For more information, see [AssumeRole][2] in the *Amazon Web # ServicesSecurity Token Service API Reference*. # # # # # # [1]: https://docs.aws.amazon.com/transfer/latest/userguide/session-policy.html # [2]: https://docs.aws.amazon.com/STS/latest/APIReference/API_AssumeRole.html # # @option params [Types::PosixProfile] :posix_profile # The full POSIX identity, including user ID (`Uid`), group ID (`Gid`), # and any secondary groups IDs (`SecondaryGids`), that controls your # users' access to your Amazon EFS file systems. The POSIX permissions # that are set on files and directories in your file system determine # the level of access your users get when transferring files into and # out of your Amazon EFS file systems. # # @option params [String] :role # Specifies the Amazon Resource Name (ARN) of the IAM role that controls # your users' access to your Amazon S3 bucket or EFS file system. The # policies attached to this role determine the level of access that you # want to provide your users when transferring files into and out of # your Amazon S3 bucket or EFS file system. The IAM role should also # contain a trust relationship that allows the server to access your # resources when servicing your users' transfer requests. # # @option params [required, String] :server_id # A system-assigned unique identifier for a server instance. This is the # specific server that you added your user to. # # @option params [required, String] :external_id # A unique identifier that is required to identify specific groups # within your directory. The users of the group that you associate have # access to your Amazon S3 or Amazon EFS resources over the enabled # protocols using Amazon Web Services Transfer Family. If you know the # group name, you can view the SID values by running the following # command using Windows PowerShell. # # `Get-ADGroup -Filter \{samAccountName -like "YourGroupName*"\} # -Properties * | Select SamAccountName,ObjectSid` # # In that command, replace *YourGroupName* with the name of your Active # Directory group. # # The regex used to validate this parameter is a string of characters # consisting of uppercase and lowercase alphanumeric characters with no # spaces. You can also include underscores or any of the following # characters: =,.@:/- # # @return [Types::UpdateAccessResponse] Returns a {Seahorse::Client::Response response} object which responds to the following methods: # # * {Types::UpdateAccessResponse#server_id #server_id} => String # * {Types::UpdateAccessResponse#external_id #external_id} => String # # @example Request syntax with placeholder values # # resp = client.update_access({ # home_directory: "HomeDirectory", # home_directory_type: "PATH", # accepts PATH, LOGICAL # home_directory_mappings: [ # { # entry: "MapEntry", # required # target: "MapTarget", # required # }, # ], # policy: "Policy", # posix_profile: { # uid: 1, # required # gid: 1, # required # secondary_gids: [1], # }, # role: "Role", # server_id: "ServerId", # required # external_id: "ExternalId", # required # }) # # @example Response structure # # resp.server_id #=> String # resp.external_id #=> String # # @see http://docs.aws.amazon.com/goto/WebAPI/transfer-2018-11-05/UpdateAccess AWS API Documentation # # @overload update_access(params = {}) # @param [Hash] params ({}) def update_access(params = {}, options = {}) req = build_request(:update_access, params) req.send_request(options) end # Updates the file transfer protocol-enabled server's properties after # that server has been created. # # The `UpdateServer` call returns the `ServerId` of the server you # updated. # # @option params [String] :certificate # The Amazon Resource Name (ARN) of the Amazon Web ServicesCertificate # Manager (ACM) certificate. Required when `Protocols` is set to `FTPS`. # # To request a new public certificate, see [Request a public # certificate][1] in the Amazon Web ServicesCertificate Manager User # Guide. # # To import an existing certificate into ACM, see [Importing # certificates into ACM][2] in the Amazon Web ServicesCertificate # Manager User Guide. # # To request a private certificate to use FTPS through private IP # addresses, see [Request a private certificate][3] in the Amazon # Web ServicesCertificate Manager User Guide. # # Certificates with the following cryptographic algorithms and key sizes # are supported: # # * 2048-bit RSA (RSA\_2048) # # * 4096-bit RSA (RSA\_4096) # # * Elliptic Prime Curve 256 bit (EC\_prime256v1) # # * Elliptic Prime Curve 384 bit (EC\_secp384r1) # # * Elliptic Prime Curve 521 bit (EC\_secp521r1) # # The certificate must be a valid SSL/TLS X.509 version 3 certificate # with FQDN or IP address specified and information about the issuer. # # # # # # [1]: https://docs.aws.amazon.com/acm/latest/userguide/gs-acm-request-public.html # [2]: https://docs.aws.amazon.com/acm/latest/userguide/import-certificate.html # [3]: https://docs.aws.amazon.com/acm/latest/userguide/gs-acm-request-private.html # # @option params [Types::ProtocolDetails] :protocol_details # The protocol settings that are configured for your server. # # Use the `PassiveIp` parameter to indicate passive mode (for FTP and # FTPS protocols). Enter a single dotted-quad IPv4 address, such as the # external IP address of a firewall, router, or load balancer. # # Use the `TlsSessionResumptionMode` parameter to determine whether or # not your Transfer server resumes recent, negotiated sessions through a # unique session ID. # # @option params [Types::EndpointDetails] :endpoint_details # The virtual private cloud (VPC) endpoint settings that are configured # for your server. When you host your endpoint within your VPC, you can # make it accessible only to resources within your VPC, or you can # attach Elastic IP addresses and make it accessible to clients over the # internet. Your VPC's default security groups are automatically # assigned to your endpoint. # # @option params [String] :endpoint_type # The type of endpoint that you want your server to use. You can choose # to make your server's endpoint publicly accessible (PUBLIC) or host # it inside your VPC. With an endpoint that is hosted in a VPC, you can # restrict access to your server and resources only within your VPC or # choose to make it internet facing by attaching Elastic IP addresses # directly to it. # # After May 19, 2021, you won't be able to create a server using # `EndpointType=VPC_ENDPOINT` in your Amazon Web Servicesaccount if your # account hasn't already done so before May 19, 2021. If you have # already created servers with `EndpointType=VPC_ENDPOINT` in your # Amazon Web Servicesaccount on or before May 19, 2021, you will not be # affected. After this date, use `EndpointType`=`VPC`. # # For more information, see # https://docs.aws.amazon.com/transfer/latest/userguide/create-server-in-vpc.html#deprecate-vpc-endpoint. # # It is recommended that you use `VPC` as the `EndpointType`. With this # endpoint type, you have the option to directly associate up to three # Elastic IPv4 addresses (BYO IP included) with your server's endpoint # and use VPC security groups to restrict traffic by the client's # public IP address. This is not possible with `EndpointType` set to # `VPC_ENDPOINT`. # # # # @option params [String] :host_key # The RSA private key as generated by `ssh-keygen -N "" -m PEM -f # my-new-server-key`. # # If you aren't planning to migrate existing users from an existing # server to a new server, don't update the host key. Accidentally # changing a server's host key can be disruptive. # # For more information, see [Change the host key for your SFTP-enabled # server][1] in the *Amazon Web ServicesTransfer Family User Guide*. # # # # [1]: https://docs.aws.amazon.com/transfer/latest/userguide/edit-server-config.html#configuring-servers-change-host-key # # @option params [Types::IdentityProviderDetails] :identity_provider_details # An array containing all of the information required to call a # customer's authentication API method. # # @option params [String] :logging_role # Specifies the Amazon Resource Name (ARN) of the Amazon Web Services # Identity and Access Management (IAM) role that allows a server to turn # on Amazon CloudWatch logging for Amazon S3 or Amazon EFS events. When # set, user activity can be viewed in your CloudWatch logs. # # @option params [String] :post_authentication_login_banner # Specify a string to display when users connect to a server. This # string is displayed after the user authenticates. # # The SFTP protocol does not support post-authentication display # banners. # # # # @option params [String] :pre_authentication_login_banner # Specify a string to display when users connect to a server. This # string is displayed before the user authenticates. For example, the # following banner displays details about using the system. # # `This system is for the use of authorized users only. Individuals # using this computer system without authority, or in excess of their # authority, are subject to having all of their activities on this # system monitored and recorded by system personnel.` # # @option params [Array] :protocols # Specifies the file transfer protocol or protocols over which your file # transfer protocol client can connect to your server's endpoint. The # available protocols are: # # * Secure Shell (SSH) File Transfer Protocol (SFTP): File transfer over # SSH # # * File Transfer Protocol Secure (FTPS): File transfer with TLS # encryption # # * File Transfer Protocol (FTP): Unencrypted file transfer # # If you select `FTPS`, you must choose a certificate stored in Amazon # Web ServicesCertificate Manager (ACM) which will be used to identify # your server when clients connect to it over FTPS. # # If `Protocol` includes either `FTP` or `FTPS`, then the `EndpointType` # must be `VPC` and the `IdentityProviderType` must be # `AWS_DIRECTORY_SERVICE` or `API_GATEWAY`. # # If `Protocol` includes `FTP`, then `AddressAllocationIds` cannot be # associated. # # If `Protocol` is set only to `SFTP`, the `EndpointType` can be set to # `PUBLIC` and the `IdentityProviderType` can be set to # `SERVICE_MANAGED`. # # # # @option params [String] :security_policy_name # Specifies the name of the security policy that is attached to the # server. # # @option params [required, String] :server_id # A system-assigned unique identifier for a server instance that the # user account is assigned to. # # @option params [Types::WorkflowDetails] :workflow_details # Specifies the workflow ID for the workflow to assign and the execution # role used for executing the workflow. # # To remove an associated workflow from a server, you can provide an # empty `OnUpload` object, as in the following example. # # `aws transfer update-server --server-id s-01234567890abcdef # --workflow-details '\{"OnUpload":[]\}'` # # @return [Types::UpdateServerResponse] Returns a {Seahorse::Client::Response response} object which responds to the following methods: # # * {Types::UpdateServerResponse#server_id #server_id} => String # # @example Request syntax with placeholder values # # resp = client.update_server({ # certificate: "Certificate", # protocol_details: { # passive_ip: "PassiveIp", # tls_session_resumption_mode: "DISABLED", # accepts DISABLED, ENABLED, ENFORCED # }, # endpoint_details: { # address_allocation_ids: ["AddressAllocationId"], # subnet_ids: ["SubnetId"], # vpc_endpoint_id: "VpcEndpointId", # vpc_id: "VpcId", # security_group_ids: ["SecurityGroupId"], # }, # endpoint_type: "PUBLIC", # accepts PUBLIC, VPC, VPC_ENDPOINT # host_key: "HostKey", # identity_provider_details: { # url: "Url", # invocation_role: "Role", # directory_id: "DirectoryId", # function: "Function", # }, # logging_role: "NullableRole", # post_authentication_login_banner: "PostAuthenticationLoginBanner", # pre_authentication_login_banner: "PreAuthenticationLoginBanner", # protocols: ["SFTP"], # accepts SFTP, FTP, FTPS # security_policy_name: "SecurityPolicyName", # server_id: "ServerId", # required # workflow_details: { # on_upload: [ # required # { # workflow_id: "WorkflowId", # required # execution_role: "Role", # required # }, # ], # }, # }) # # @example Response structure # # resp.server_id #=> String # # @see http://docs.aws.amazon.com/goto/WebAPI/transfer-2018-11-05/UpdateServer AWS API Documentation # # @overload update_server(params = {}) # @param [Hash] params ({}) def update_server(params = {}, options = {}) req = build_request(:update_server, params) req.send_request(options) end # Assigns new properties to a user. Parameters you pass modify any or # all of the following: the home directory, role, and policy for the # `UserName` and `ServerId` you specify. # # The response returns the `ServerId` and the `UserName` for the updated # user. # # @option params [String] :home_directory # The landing directory (folder) for a user when they log in to the # server using the client. # # A `HomeDirectory` example is `/bucket_name/home/mydirectory`. # # @option params [String] :home_directory_type # The type of landing directory (folder) you want your users' home # directory to be when they log into the server. If you set it to # `PATH`, the user will see the absolute Amazon S3 bucket or EFS paths # as is in their file transfer protocol clients. If you set it # `LOGICAL`, you need to provide mappings in the `HomeDirectoryMappings` # for how you want to make Amazon S3 or EFS paths visible to your users. # # @option params [Array] :home_directory_mappings # Logical directory mappings that specify what Amazon S3 or Amazon EFS # paths and keys should be visible to your user and how you want to make # them visible. You must specify the `Entry` and `Target` pair, where # `Entry` shows how the path is made visible and `Target` is the actual # Amazon S3 or Amazon EFS path. If you only specify a target, it is # displayed as is. You also must ensure that your Amazon Web Services # Identity and Access Management (IAM) role provides access to paths in # `Target`. This value can only be set when `HomeDirectoryType` is set # to *LOGICAL*. # # The following is an `Entry` and `Target` pair example. # # `[ \{ "Entry": "/directory1", "Target": # "/bucket_name/home/mydirectory" \} ]` # # In most cases, you can use this value instead of the session policy to # lock down your user to the designated home directory ("`chroot`"). # To do this, you can set `Entry` to '/' and set `Target` to the # HomeDirectory parameter value. # # The following is an `Entry` and `Target` pair example for `chroot`. # # `[ \{ "Entry": "/", "Target": "/bucket_name/home/mydirectory" \} ]` # # @option params [String] :policy # A session policy for your user so that you can use the same IAM role # across multiple users. This policy scopes down user access to portions # of their Amazon S3 bucket. Variables that you can use inside this # policy include `$\{Transfer:UserName\}`, # `$\{Transfer:HomeDirectory\}`, and `$\{Transfer:HomeBucket\}`. # # This only applies when the domain of `ServerId` is S3. EFS does not # use session policies. # # For session policies, Amazon Web Services Transfer Family stores the # policy as a JSON blob, instead of the Amazon Resource Name (ARN) of # the policy. You save the policy as a JSON blob and pass it in the # `Policy` argument. # # For an example of a session policy, see [Creating a session # policy][1]. # # For more information, see [AssumeRole][2] in the *Amazon Web Services # Security Token Service API Reference*. # # # # # # [1]: https://docs.aws.amazon.com/transfer/latest/userguide/session-policy # [2]: https://docs.aws.amazon.com/STS/latest/APIReference/API_AssumeRole.html # # @option params [Types::PosixProfile] :posix_profile # Specifies the full POSIX identity, including user ID (`Uid`), group ID # (`Gid`), and any secondary groups IDs (`SecondaryGids`), that controls # your users' access to your Amazon Elastic File Systems (Amazon EFS). # The POSIX permissions that are set on files and directories in your # file system determines the level of access your users get when # transferring files into and out of your Amazon EFS file systems. # # @option params [String] :role # Specifies the Amazon Resource Name (ARN) of the IAM role that controls # your users' access to your Amazon S3 bucket or EFS file system. The # policies attached to this role determine the level of access that you # want to provide your users when transferring files into and out of # your Amazon S3 bucket or EFS file system. The IAM role should also # contain a trust relationship that allows the server to access your # resources when servicing your users' transfer requests. # # @option params [required, String] :server_id # A system-assigned unique identifier for a server instance that the # user account is assigned to. # # @option params [required, String] :user_name # A unique string that identifies a user and is associated with a server # as specified by the `ServerId`. This user name must be a minimum of 3 # and a maximum of 100 characters long. The following are valid # characters: a-z, A-Z, 0-9, underscore '\_', hyphen '-', period # '.', and at sign '@'. The user name can't start with a hyphen, # period, or at sign. # # @return [Types::UpdateUserResponse] Returns a {Seahorse::Client::Response response} object which responds to the following methods: # # * {Types::UpdateUserResponse#server_id #server_id} => String # * {Types::UpdateUserResponse#user_name #user_name} => String # # @example Request syntax with placeholder values # # resp = client.update_user({ # home_directory: "HomeDirectory", # home_directory_type: "PATH", # accepts PATH, LOGICAL # home_directory_mappings: [ # { # entry: "MapEntry", # required # target: "MapTarget", # required # }, # ], # policy: "Policy", # posix_profile: { # uid: 1, # required # gid: 1, # required # secondary_gids: [1], # }, # role: "Role", # server_id: "ServerId", # required # user_name: "UserName", # required # }) # # @example Response structure # # resp.server_id #=> String # resp.user_name #=> String # # @see http://docs.aws.amazon.com/goto/WebAPI/transfer-2018-11-05/UpdateUser AWS API Documentation # # @overload update_user(params = {}) # @param [Hash] params ({}) def update_user(params = {}, options = {}) req = build_request(:update_user, params) req.send_request(options) end # @!endgroup # @param params ({}) # @api private def build_request(operation_name, params = {}) handlers = @handlers.for(operation_name) context = Seahorse::Client::RequestContext.new( operation_name: operation_name, operation: config.api.operation(operation_name), client: self, params: params, config: config) context[:gem_name] = 'aws-sdk-transfer' context[:gem_version] = '1.53.0' Seahorse::Client::Request.new(handlers, context) end # Polls an API operation until a resource enters a desired state. # # ## Basic Usage # # A waiter will call an API operation until: # # * It is successful # * It enters a terminal state # * It makes the maximum number of attempts # # In between attempts, the waiter will sleep. # # # polls in a loop, sleeping between attempts # client.wait_until(waiter_name, params) # # ## Configuration # # You can configure the maximum number of polling attempts, and the # delay (in seconds) between each polling attempt. You can pass # configuration as the final arguments hash. # # # poll for ~25 seconds # client.wait_until(waiter_name, params, { # max_attempts: 5, # delay: 5, # }) # # ## Callbacks # # You can be notified before each polling attempt and before each # delay. If you throw `:success` or `:failure` from these callbacks, # it will terminate the waiter. # # started_at = Time.now # client.wait_until(waiter_name, params, { # # # disable max attempts # max_attempts: nil, # # # poll for 1 hour, instead of a number of attempts # before_wait: -> (attempts, response) do # throw :failure if Time.now - started_at > 3600 # end # }) # # ## Handling Errors # # When a waiter is unsuccessful, it will raise an error. # All of the failure errors extend from # {Aws::Waiters::Errors::WaiterFailed}. # # begin # client.wait_until(...) # rescue Aws::Waiters::Errors::WaiterFailed # # resource did not enter the desired state in time # end # # ## Valid Waiters # # The following table lists the valid waiter names, the operations they call, # and the default `:delay` and `:max_attempts` values. # # | waiter_name | params | :delay | :max_attempts | # | -------------- | ------------------------ | -------- | ------------- | # | server_offline | {Client#describe_server} | 30 | 120 | # | server_online | {Client#describe_server} | 30 | 120 | # # @raise [Errors::FailureStateError] Raised when the waiter terminates # because the waiter has entered a state that it will not transition # out of, preventing success. # # @raise [Errors::TooManyAttemptsError] Raised when the configured # maximum number of attempts have been made, and the waiter is not # yet successful. # # @raise [Errors::UnexpectedError] Raised when an error is encounted # while polling for a resource that is not expected. # # @raise [Errors::NoSuchWaiterError] Raised when you request to wait # for an unknown state. # # @return [Boolean] Returns `true` if the waiter was successful. # @param [Symbol] waiter_name # @param [Hash] params ({}) # @param [Hash] options ({}) # @option options [Integer] :max_attempts # @option options [Integer] :delay # @option options [Proc] :before_attempt # @option options [Proc] :before_wait def wait_until(waiter_name, params = {}, options = {}) w = waiter(waiter_name, options) yield(w.waiter) if block_given? # deprecated w.wait(params) end # @api private # @deprecated def waiter_names waiters.keys end private # @param [Symbol] waiter_name # @param [Hash] options ({}) def waiter(waiter_name, options = {}) waiter_class = waiters[waiter_name] if waiter_class waiter_class.new(options.merge(client: self)) else raise Aws::Waiters::Errors::NoSuchWaiterError.new(waiter_name, waiters.keys) end end def waiters { server_offline: Waiters::ServerOffline, server_online: Waiters::ServerOnline } end class << self # @api private attr_reader :identifier # @api private def errors_module Errors end end end end