# python version 1.0 DO NOT EDIT # # This python file has been generated by smidump version 0.5.0: # # smidump -f python ADSL2-LINE-TC-MIB FILENAME = "./libsmi-0.5.0/mibs/ietf/ADSL2-LINE-TC-MIB" MIB = { "moduleName" : "ADSL2-LINE-TC-MIB", "ADSL2-LINE-TC-MIB" : { "nodetype" : "module", "language" : "SMIv2", "organization" : """ADSLMIB Working Group""", "contact" : """WG-email: adslmib@ietf.org Info: https://www1.ietf.org/mailman/listinfo/adslmib Chair: Mike Sneed Sand Channel Systems Postal: P.O. Box 37324 Raleigh NC 27627-732 Email: sneedmike@hotmail.com Phone: +1 206 600 7022 Co-Chair & Co-editor: Menachem Dodge ECI Telecom Ltd. Postal: 30 Hasivim St. Petach Tikva 49517, Israel. Email: mbdodge@ieee.org Phone: +972 3 926 8421 Co-editor: Moti Morgenstern ECI Telecom Ltd. Postal: 30 Hasivim St. Petach Tikva 49517, Israel. Email: moti.morgenstern@ecitele.com Phone: +972 3 926 6258 Co-editor: Scott Baillie NEC Australia Postal: 649-655 Springvale Road, Mulgrave, Victoria 3170, Australia. Email: scott.baillie@nec.com.au Phone: +61 3 9264 3986 Co-editor: Umberto Bonollo NEC Australia Postal: 649-655 Springvale Road, Mulgrave, Victoria 3170, Australia. Email: umberto.bonollo@nec.com.au Phone: +61 3 9264 3385 """, "description" : """This MIB Module provides Textual Conventions to be used by the ADSL2-LINE-MIB module for the purpose of managing ADSL, ADSL2, and ADSL2+ lines. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC 4706: see the RFC itself for full legal notices.""", "revisions" : ( { "date" : "2006-10-04 00:00", "description" : """Initial version, published as RFC 4706.""", }, ), "identity node" : "adsl2TCMIB", }, "imports" : ( {"module" : "SNMPv2-SMI", "name" : "MODULE-IDENTITY"}, {"module" : "SNMPv2-SMI", "name" : "transmission"}, {"module" : "SNMPv2-TC", "name" : "TEXTUAL-CONVENTION"}, ), "typedefs" : { "Adsl2Unit" : { "basetype" : "Enumeration", "status" : "current", "atuc" : { "nodetype" : "namednumber", "number" : "1" }, "atur" : { "nodetype" : "namednumber", "number" : "2" }, "description" : """Identifies a transceiver as being either an ATU-C or an ATU-R. An ADSL line consists of two transceivers, an ATU-C and an ATU-R. Attributes with this syntax reference the two sides of a line. Specified as an INTEGER, the two values are: atuc(1) -- Central office ADSL terminal unit (ATU-C). atur(2) -- Remote ADSL terminal unit (ATU-R).""", }, "Adsl2Direction" : { "basetype" : "Enumeration", "status" : "current", "upstream" : { "nodetype" : "namednumber", "number" : "1" }, "downstream" : { "nodetype" : "namednumber", "number" : "2" }, "description" : """Identifies the direction of a band as being either upstream or downstream. Specified as an INTEGER, the two values are: upstream(1), and downstream(2).""", }, "Adsl2TransmissionModeType" : { "basetype" : "Bits", "status" : "current", "ansit1413" : { "nodetype" : "namednumber", "number" : "0" }, "etsi" : { "nodetype" : "namednumber", "number" : "1" }, "g9921PotsNonOverlapped" : { "nodetype" : "namednumber", "number" : "2" }, "g9921PotsOverlapped" : { "nodetype" : "namednumber", "number" : "3" }, "g9921IsdnNonOverlapped" : { "nodetype" : "namednumber", "number" : "4" }, "g9921isdnOverlapped" : { "nodetype" : "namednumber", "number" : "5" }, "g9921tcmIsdnNonOverlapped" : { "nodetype" : "namednumber", "number" : "6" }, "g9921tcmIsdnOverlapped" : { "nodetype" : "namednumber", "number" : "7" }, "g9922potsNonOverlapped" : { "nodetype" : "namednumber", "number" : "8" }, "g9922potsOverlapped" : { "nodetype" : "namednumber", "number" : "9" }, "g9922tcmIsdnNonOverlapped" : { "nodetype" : "namednumber", "number" : "10" }, "g9922tcmIsdnOverlapped" : { "nodetype" : "namednumber", "number" : "11" }, "g9921tcmIsdnSymmetric" : { "nodetype" : "namednumber", "number" : "12" }, "reserved1" : { "nodetype" : "namednumber", "number" : "13" }, "reserved2" : { "nodetype" : "namednumber", "number" : "14" }, "reserved3" : { "nodetype" : "namednumber", "number" : "15" }, "reserved4" : { "nodetype" : "namednumber", "number" : "16" }, "reserved5" : { "nodetype" : "namednumber", "number" : "17" }, "g9923PotsNonOverlapped" : { "nodetype" : "namednumber", "number" : "18" }, "g9923PotsOverlapped" : { "nodetype" : "namednumber", "number" : "19" }, "g9923IsdnNonOverlapped" : { "nodetype" : "namednumber", "number" : "20" }, "g9923isdnOverlapped" : { "nodetype" : "namednumber", "number" : "21" }, "reserved6" : { "nodetype" : "namednumber", "number" : "22" }, "reserved7" : { "nodetype" : "namednumber", "number" : "23" }, "g9924potsNonOverlapped" : { "nodetype" : "namednumber", "number" : "24" }, "g9924potsOverlapped" : { "nodetype" : "namednumber", "number" : "25" }, "reserved8" : { "nodetype" : "namednumber", "number" : "26" }, "reserved9" : { "nodetype" : "namednumber", "number" : "27" }, "g9923AnnexIAllDigNonOverlapped" : { "nodetype" : "namednumber", "number" : "28" }, "g9923AnnexIAllDigOverlapped" : { "nodetype" : "namednumber", "number" : "29" }, "g9923AnnexJAllDigNonOverlapped" : { "nodetype" : "namednumber", "number" : "30" }, "g9923AnnexJAllDigOverlapped" : { "nodetype" : "namednumber", "number" : "31" }, "g9924AnnexIAllDigNonOverlapped" : { "nodetype" : "namednumber", "number" : "32" }, "g9924AnnexIAllDigOverlapped" : { "nodetype" : "namednumber", "number" : "33" }, "g9923AnnexLMode1NonOverlapped" : { "nodetype" : "namednumber", "number" : "34" }, "g9923AnnexLMode2NonOverlapped" : { "nodetype" : "namednumber", "number" : "35" }, "g9923AnnexLMode3Overlapped" : { "nodetype" : "namednumber", "number" : "36" }, "g9923AnnexLMode4Overlapped" : { "nodetype" : "namednumber", "number" : "37" }, "g9923AnnexMPotsNonOverlapped" : { "nodetype" : "namednumber", "number" : "38" }, "g9923AnnexMPotsOverlapped" : { "nodetype" : "namednumber", "number" : "39" }, "g9925PotsNonOverlapped" : { "nodetype" : "namednumber", "number" : "40" }, "g9925PotsOverlapped" : { "nodetype" : "namednumber", "number" : "41" }, "g9925IsdnNonOverlapped" : { "nodetype" : "namednumber", "number" : "42" }, "g9925isdnOverlapped" : { "nodetype" : "namednumber", "number" : "43" }, "reserved10" : { "nodetype" : "namednumber", "number" : "44" }, "reserved11" : { "nodetype" : "namednumber", "number" : "45" }, "g9925AnnexIAllDigNonOverlapped" : { "nodetype" : "namednumber", "number" : "46" }, "g9925AnnexIAllDigOverlapped" : { "nodetype" : "namednumber", "number" : "47" }, "g9925AnnexJAllDigNonOverlapped" : { "nodetype" : "namednumber", "number" : "48" }, "g9925AnnexJAllDigOverlapped" : { "nodetype" : "namednumber", "number" : "49" }, "g9925AnnexMPotsNonOverlapped" : { "nodetype" : "namednumber", "number" : "50" }, "g9925AnnexMPotsOverlapped" : { "nodetype" : "namednumber", "number" : "51" }, "reserved12" : { "nodetype" : "namednumber", "number" : "52" }, "reserved13" : { "nodetype" : "namednumber", "number" : "53" }, "reserved14" : { "nodetype" : "namednumber", "number" : "54" }, "reserved15" : { "nodetype" : "namednumber", "number" : "55" }, "description" : """A set of ADSL2 line transmission modes, with one bit per mode. The notes (F) and (L) denote Full-Rate and Lite/splitterless, respectively: Bit 00 : Regional Std. (ANSI T1.413) (F) Bit 01 : Regional Std. (ETSI DTS/TM06006) (F) Bit 02 : G.992.1 POTS non-overlapped (F) Bit 03 : G.992.1 POTS overlapped (F) Bit 04 : G.992.1 ISDN non-overlapped (F) Bit 05 : G.992.1 ISDN overlapped (F) Bit 06 : G.992.1 TCM-ISDN non-overlapped (F) Bit 07 : G.992.1 TCM-ISDN overlapped (F) Bit 08 : G.992.2 POTS non-overlapped (L) Bit 09 : G.992.2 POTS overlapped (L) Bit 10 : G.992.2 with TCM-ISDN non-overlapped (L) Bit 11 : G.992.2 with TCM-ISDN overlapped (L) Bit 12 : G.992.1 TCM-ISDN symmetric (F) -- not in G.997.1 Bit 13-17: Reserved Bit 18 : G.992.3 POTS non-overlapped (F) Bit 19 : G.992.3 POTS overlapped (F) Bit 20 : G.992.3 ISDN non-overlapped (F) Bit 21 : G.992.3 ISDN overlapped (F) Bit 22-23: Reserved Bit 24 : G.992.4 POTS non-overlapped (L) Bit 25 : G.992.4 POTS overlapped (L) Bit 26-27: Reserved Bit 28 : G.992.3 Annex I All-Digital non-overlapped (F) Bit 29 : G.992.3 Annex I All-Digital overlapped (F) Bit 30 : G.992.3 Annex J All-Digital non-overlapped (F) Bit 31 : G.992.3 Annex J All-Digital overlapped (F) Bit 32 : G.992.4 Annex I All-Digital non-overlapped (L) Bit 33 : G.992.4 Annex I All-Digital overlapped (L) Bit 34 : G.992.3 Annex L POTS non-overlapped, mode 1, wide U/S (F) Bit 35 : G.992.3 Annex L POTS non-overlapped, mode 2, narrow U/S(F) Bit 36 : G.992.3 Annex L POTS overlapped, mode 3, wide U/S (F) Bit 37 : G.992.3 Annex L POTS overlapped, mode 4, narrow U/S (F) Bit 38 : G.992.3 Annex M POTS non-overlapped (F) Bit 39 : G.992.3 Annex M POTS overlapped (F) Bit 40 : G.992.5 POTS non-overlapped (F) Bit 41 : G.992.5 POTS overlapped (F) Bit 42 : G.992.5 ISDN non-overlapped (F) Bit 43 : G.992.5 ISDN overlapped (F) Bit 44-45: Reserved Bit 46 : G.992.5 Annex I All-Digital non-overlapped (F) Bit 47 : G.992.5 Annex I All-Digital overlapped (F) Bit 48 : G.992.5 Annex J All-Digital non-overlapped (F) Bit 49 : G.992.5 Annex J All-Digital overlapped (F) Bit 50 : G.992.5 Annex M POTS non-overlapped (F) Bit 51 : G.992.5 Annex M POTS overlapped (F) Bit 52-55: Reserved""", }, "Adsl2RaMode" : { "basetype" : "Enumeration", "status" : "current", "manual" : { "nodetype" : "namednumber", "number" : "1" }, "raInit" : { "nodetype" : "namednumber", "number" : "2" }, "dynamicRa" : { "nodetype" : "namednumber", "number" : "3" }, "description" : """Specifies the rate adaptation behavior for the line. The three possible behaviors are: manual(1) - No Rate-Adaptation. The initialization process attempts to synchronize to a specified rate. raInit(2) - Rate-Adaptation during initialization process only, which attempts to synchronize to a rate between minimum and maximum specified values. dynamicRa(3) - Dynamic Rate-Adaptation during initialization process as well as during SHOWTIME.""", }, "Adsl2InitResult" : { "basetype" : "Enumeration", "status" : "current", "noFail" : { "nodetype" : "namednumber", "number" : "0" }, "configError" : { "nodetype" : "namednumber", "number" : "1" }, "configNotFeasible" : { "nodetype" : "namednumber", "number" : "2" }, "commFail" : { "nodetype" : "namednumber", "number" : "3" }, "noPeerAtu" : { "nodetype" : "namednumber", "number" : "4" }, "otherCause" : { "nodetype" : "namednumber", "number" : "5" }, "description" : """Specifies the result of a full initialization attempt; the six possible result values are: noFail(0) - Successful initialization. configError(1) - Configuration failure. configNotFeasible(2) - Configuration details not supported. commFail(3) - Communication failure. noPeerAtu(4) - Peer ATU not detected. otherCause(5) - Other initialization failure reason. The values used are as defined in ITU-T G.997.1, paragraph 7.5.1.3""", }, "Adsl2OperationModes" : { "basetype" : "Enumeration", "status" : "current", "defMode" : { "nodetype" : "namednumber", "number" : "1" }, "adsl" : { "nodetype" : "namednumber", "number" : "2" }, "g9923PotsNonOverlapped" : { "nodetype" : "namednumber", "number" : "8" }, "g9923PotsOverlapped" : { "nodetype" : "namednumber", "number" : "9" }, "g9923IsdnNonOverlapped" : { "nodetype" : "namednumber", "number" : "10" }, "g9923isdnOverlapped" : { "nodetype" : "namednumber", "number" : "11" }, "g9924potsNonOverlapped" : { "nodetype" : "namednumber", "number" : "14" }, "g9924potsOverlapped" : { "nodetype" : "namednumber", "number" : "15" }, "g9923AnnexIAllDigNonOverlapped" : { "nodetype" : "namednumber", "number" : "18" }, "g9923AnnexIAllDigOverlapped" : { "nodetype" : "namednumber", "number" : "19" }, "g9923AnnexJAllDigNonOverlapped" : { "nodetype" : "namednumber", "number" : "20" }, "g9923AnnexJAllDigOverlapped" : { "nodetype" : "namednumber", "number" : "21" }, "g9924AnnexIAllDigNonOverlapped" : { "nodetype" : "namednumber", "number" : "22" }, "g9924AnnexIAllDigOverlapped" : { "nodetype" : "namednumber", "number" : "23" }, "g9923AnnexLMode1NonOverlapped" : { "nodetype" : "namednumber", "number" : "24" }, "g9923AnnexLMode2NonOverlapped" : { "nodetype" : "namednumber", "number" : "25" }, "g9923AnnexLMode3Overlapped" : { "nodetype" : "namednumber", "number" : "26" }, "g9923AnnexLMode4Overlapped" : { "nodetype" : "namednumber", "number" : "27" }, "g9923AnnexMPotsNonOverlapped" : { "nodetype" : "namednumber", "number" : "28" }, "g9923AnnexMPotsOverlapped" : { "nodetype" : "namednumber", "number" : "29" }, "g9925PotsNonOverlapped" : { "nodetype" : "namednumber", "number" : "30" }, "g9925PotsOverlapped" : { "nodetype" : "namednumber", "number" : "31" }, "g9925IsdnNonOverlapped" : { "nodetype" : "namednumber", "number" : "32" }, "g9925isdnOverlapped" : { "nodetype" : "namednumber", "number" : "33" }, "g9925AnnexIAllDigNonOverlapped" : { "nodetype" : "namednumber", "number" : "36" }, "g9925AnnexIAllDigOverlapped" : { "nodetype" : "namednumber", "number" : "37" }, "g9925AnnexJAllDigNonOverlapped" : { "nodetype" : "namednumber", "number" : "38" }, "g9925AnnexJAllDigOverlapped" : { "nodetype" : "namednumber", "number" : "39" }, "g9925AnnexMPotsNonOverlapped" : { "nodetype" : "namednumber", "number" : "40" }, "g9925AnnexMPotsOverlapped" : { "nodetype" : "namednumber", "number" : "41" }, "description" : """The ADSL2 management model specified includes an ADSL Mode attribute that identifies an instance of ADSL Mode-Specific PSD Configuration object in the ADSL Line Profile. The following classes of ADSL operating mode are defined. The notes (F) and (L) denote Full-Rate and Lite/splitterless respectively: +-------+--------------------------------------------------+ | Value | ADSL operation mode description | +-------+--------------------------------------------------+ 1 - The default/generic PSD configuration. Default configuration will be used when no other matching mode-specific configuration can be found. 2 - ADSL family. The attributes included in the Mode- Specific PSD Configuration are irrelevant for ITU-T G.992.1 and G.992.2 ADSL modes. Hence, it is possible to map those modes to this generic class. 3-7 - Unused. Reserved for future ITU-T specification. 8 - G.992.3 POTS non-overlapped (F) 9 - G.992.3 POTS overlapped (F) 10 - G.992.3 ISDN non-overlapped (F) 11 - G.992.3 ISDN overlapped (F) 12-13 - Unused. Reserved for future ITU-T specification. 14 - G.992.4 POTS non-overlapped (L) 15 - G.992.4 POTS overlapped (L) 16-17 - Unused. Reserved for future ITU-T specification. 18 - G.992.3 Annex I All-Digital non-overlapped (F) 19 - G.992.3 Annex I All-Digital overlapped (F) 20 - G.992.3 Annex J All-Digital non-overlapped (F) 21 - G.992.3 Annex J All-Digital overlapped (F) 22 - G.992.4 Annex I All-Digital non-overlapped (L) 23 - G.992.4 Annex I All-Digital overlapped (L) 24 - G.992.3 Annex L POTS non-overlapped, mode 1, wide U/S (F) 25 - G.992.3 Annex L POTS non-overlapped, mode 2, narrow U/S(F) 26 - G.992.3 Annex L POTS overlapped, mode 3, wide U/S (F) 27 - G.992.3 Annex L POTS overlapped, mode 4, narrow U/S (F) 28 - G.992.3 Annex M POTS non-overlapped (F) 29 - G.992.3 Annex M POTS overlapped (F) 30 - G.992.5 POTS non-overlapped (F) 31 - G.992.5 POTS overlapped (F) 32 - G.992.5 ISDN non-overlapped (F) 33 - G.992.5 ISDN overlapped (F) 34-35 - Unused. Reserved for future ITU-T specification. 36 - G.992.5 Annex I All-Digital non-overlapped (F) 37 - G.992.5 Annex I All-Digital overlapped (F) 38 - G.992.5 Annex J All-Digital non-overlapped (F) 39 - G.992.5 Annex J All-Digital overlapped (F) 40 - G.992.5 Annex M POTS non-overlapped (F) 41 - G.992.5 Annex M POTS overlapped (F)""", }, "Adsl2PowerMngState" : { "basetype" : "Enumeration", "status" : "current", "l0" : { "nodetype" : "namednumber", "number" : "1" }, "l1" : { "nodetype" : "namednumber", "number" : "2" }, "l2" : { "nodetype" : "namednumber", "number" : "3" }, "l3" : { "nodetype" : "namednumber", "number" : "4" }, "description" : """Attributes with this syntax uniquely identify each power management state defined for the ADSL/ADSL2 or ADSL2+ link. The possible values are: l0(1) - L0 - Full power management state. l1(2) - L1 - Low power management state (for G.992.2). l2(3) - L2 - Low power management state (for G.992.3, G.992.4, and G.992.5). l3(4) - L3 - Idle power management state.""", }, "Adsl2ConfPmsForce" : { "basetype" : "Enumeration", "status" : "current", "l3toL0" : { "nodetype" : "namednumber", "number" : "0" }, "l0toL2" : { "nodetype" : "namednumber", "number" : "2" }, "l0orL2toL3" : { "nodetype" : "namednumber", "number" : "3" }, "description" : """Attributes with this syntax are configuration parameters that reference the desired power management state for the ADSL/ADSL2 or ADSL2+ link: l3toL0(0) - Perform a transition from L3 to L0 (Full power management state). l0toL2(2) - Perform a transition from L0 to L2 (Low power management state). l0orL2toL3(3) - Perform a transition into L3 (Idle power management state). The values used are as defined in ITU-T G.997.1, paragraph 7.3.1.1.3""", }, "Adsl2LConfProfPmMode" : { "basetype" : "Bits", "status" : "current", "allowTransitionsToIdle" : { "nodetype" : "namednumber", "number" : "0" }, "allowTransitionsToLowPower" : { "nodetype" : "namednumber", "number" : "1" }, "description" : """Attributes with this syntax are configuration parameters that reference the power modes/states into which the ATU-C or ATU-R may autonomously transit. It is a BITS structure that allows control of the following transit options: allowTransitionsToIdle(0) - XTU may autonomously transit to idle (L3) state. allowTransitionsToLowPower(1) - XTU may autonomously transit to low-power (L2) state.""", }, "Adsl2LineLdsf" : { "basetype" : "Enumeration", "status" : "current", "inhibit" : { "nodetype" : "namednumber", "number" : "0" }, "force" : { "nodetype" : "namednumber", "number" : "1" }, "description" : """Attributes with this syntax are configuration parameters that control the Loop Diagnostic mode for the ADSL/ADSL2 or ADSL2+ link. The possible values are: inhibit(0) - Inhibit Loop Diagnostic mode. force(1) - Force/Initiate Loop Diagnostic mode. The values used are as defined in ITU-T G.997.1, paragraph 7.3.1.1.8""", }, "Adsl2LdsfResult" : { "basetype" : "Enumeration", "status" : "current", "none" : { "nodetype" : "namednumber", "number" : "1" }, "success" : { "nodetype" : "namednumber", "number" : "2" }, "inProgress" : { "nodetype" : "namednumber", "number" : "3" }, "unsupported" : { "nodetype" : "namednumber", "number" : "4" }, "cannotRun" : { "nodetype" : "namednumber", "number" : "5" }, "aborted" : { "nodetype" : "namednumber", "number" : "6" }, "failed" : { "nodetype" : "namednumber", "number" : "7" }, "illegalMode" : { "nodetype" : "namednumber", "number" : "8" }, "adminUp" : { "nodetype" : "namednumber", "number" : "9" }, "tableFull" : { "nodetype" : "namednumber", "number" : "10" }, "noResources" : { "nodetype" : "namednumber", "number" : "11" }, "description" : """Possible failure reasons associated with performing a Dual Ended Loop Test (DELT) on a DSL line. Possible values are: none(1) - The default value in case LDSF was never requested for the associated line. success(2) - The recent command completed successfully. inProgress(3) - The Loop Diagnostics process is in progress. unsupported(4) - The NE or the line card doesn't support LDSF. cannotRun(5) - The NE cannot initiate the command, due to a nonspecific reason. aborted(6) - The Loop Diagnostics process aborted. failed(7) - The Loop Diagnostics process failed. illegalMode(8) - The NE cannot initiate the command, due to the specific mode of the relevant line. adminUp(9) - The NE cannot initiate the command, as the relevant line is administratively 'Up'. tableFull(10) - The NE cannot initiate the command, due to reaching the maximum number of rows in the results table. noResources(11) - The NE cannot initiate the command, due to lack of internal memory resources.""", }, "Adsl2SymbolProtection" : { "basetype" : "Enumeration", "status" : "current", "noProtection" : { "nodetype" : "namednumber", "number" : "1" }, "halfSymbol" : { "nodetype" : "namednumber", "number" : "2" }, "singleSymbol" : { "nodetype" : "namednumber", "number" : "3" }, "twoSymbols" : { "nodetype" : "namednumber", "number" : "4" }, "threeSymbols" : { "nodetype" : "namednumber", "number" : "5" }, "fourSymbols" : { "nodetype" : "namednumber", "number" : "6" }, "fiveSymbols" : { "nodetype" : "namednumber", "number" : "7" }, "sixSymbols" : { "nodetype" : "namednumber", "number" : "8" }, "sevenSymbols" : { "nodetype" : "namednumber", "number" : "9" }, "eightSymbols" : { "nodetype" : "namednumber", "number" : "10" }, "nineSymbols" : { "nodetype" : "namednumber", "number" : "11" }, "tenSymbols" : { "nodetype" : "namednumber", "number" : "12" }, "elevenSymbols" : { "nodetype" : "namednumber", "number" : "13" }, "twelveSymbols" : { "nodetype" : "namednumber", "number" : "14" }, "thirteeSymbols" : { "nodetype" : "namednumber", "number" : "15" }, "fourteenSymbols" : { "nodetype" : "namednumber", "number" : "16" }, "fifteenSymbols" : { "nodetype" : "namednumber", "number" : "17" }, "sixteenSymbols" : { "nodetype" : "namednumber", "number" : "18" }, "description" : """Attributes with this syntax are configuration parameters that reference the minimum-length impulse noise protection (INP) in terms of number of symbols. The possible values are: noProtection (i.e., INP not required), halfSymbol (i.e., INP length is 1/2 symbol), and 1-16 symbols in steps of 1 symbol.""", }, "Adsl2MaxBer" : { "basetype" : "Enumeration", "status" : "current", "eminus3" : { "nodetype" : "namednumber", "number" : "1" }, "eminus5" : { "nodetype" : "namednumber", "number" : "2" }, "eminus7" : { "nodetype" : "namednumber", "number" : "3" }, "description" : """Attributes with this syntax are configuration parameters that reference the maximum Bit Error Rate (BER). The possible values are: eminus3(1) - Maximum BER=E^-3 eminus5(2) - Maximum BER=E^-5 eminus7(3) - Maximum BER=E^-7""", }, "Adsl2ScMaskDs" : { "basetype" : "OctetString", "status" : "current", "ranges" : [ { "min" : "0", "max" : "64" }, ], "range" : { "min" : "0", "max" : "64" }, "description" : """Each one of the 512 bits in this OCTET STRING array represents the corresponding bin in the downstream direction. A value of one indicates that the bin is not in use.""", }, "Adsl2ScMaskUs" : { "basetype" : "OctetString", "status" : "current", "ranges" : [ { "min" : "0", "max" : "8" }, ], "range" : { "min" : "0", "max" : "8" }, "description" : """Each one of the 64 bits in this OCTET STRING array represents the corresponding bin in the upstream direction. A value of one indicates that the bin is not in use.""", }, "Adsl2RfiDs" : { "basetype" : "OctetString", "status" : "current", "ranges" : [ { "min" : "0", "max" : "64" }, ], "range" : { "min" : "0", "max" : "64" }, "description" : """Each one of the 512 bits in this OCTET STRING array represents the corresponding bin in the downstream direction. A value of one indicates that the bin is part of a notch filter.""", }, "Adsl2PsdMaskDs" : { "basetype" : "OctetString", "status" : "current", "ranges" : [ { "min" : "0", "max" : "96" }, ], "range" : { "min" : "0", "max" : "96" }, "description" : """This is a structure that represents up to 32 PSD Mask breakpoints. Each breakpoint occupies 3 octets: The first two octets hold the index of the sub-carrier associated with the breakpoint. The third octet holds the PSD reduction at the breakpoint from 0 (0 dBm/Hz) to 255 (-127.5 dBm/Hz) using units of 0.5 dBm/Hz.""", }, "Adsl2PsdMaskUs" : { "basetype" : "OctetString", "status" : "current", "ranges" : [ { "min" : "0", "max" : "12" }, ], "range" : { "min" : "0", "max" : "12" }, "description" : """This is a structure that represents up to 4 PSD Mask breakpoints. Each breakpoint occupies 3 octets: The first two octets hold the index of the sub-carrier associated with the breakpoint. The third octet holds the PSD reduction at the breakpoint from 0 (0 dBm/Hz) to 255 (-127.5 dBm/Hz) using units of 0.5 dBm/Hz.""", }, "Adsl2Tssi" : { "basetype" : "OctetString", "status" : "current", "ranges" : [ { "min" : "0", "max" : "96" }, ], "range" : { "min" : "0", "max" : "96" }, "description" : """This is a structure that represents up to 32 transmit spectrum shaping (TSSi) breakpoints. Each breakpoint occupies 3 octets: The first two octets hold the index of the sub-carrier associated with the breakpoint. The third octet holds the shaping parameter at the breakpoint. It is a value from 0 to 127 (units of -0.5 dB). The special value 127 indicates that the sub-carrier is not transmitted.""", }, "Adsl2LastTransmittedState" : { "basetype" : "Enumeration", "status" : "current", "atucG9941" : { "nodetype" : "namednumber", "number" : "0" }, "atucQuiet1" : { "nodetype" : "namednumber", "number" : "1" }, "atucComb1" : { "nodetype" : "namednumber", "number" : "2" }, "atucQuiet2" : { "nodetype" : "namednumber", "number" : "3" }, "atucComb2" : { "nodetype" : "namednumber", "number" : "4" }, "atucIcomb1" : { "nodetype" : "namednumber", "number" : "5" }, "atucLineprob" : { "nodetype" : "namednumber", "number" : "6" }, "atucQuiet3" : { "nodetype" : "namednumber", "number" : "7" }, "atucComb3" : { "nodetype" : "namednumber", "number" : "8" }, "atucIComb2" : { "nodetype" : "namednumber", "number" : "9" }, "atucMsgfmt" : { "nodetype" : "namednumber", "number" : "10" }, "atucMsgpcb" : { "nodetype" : "namednumber", "number" : "11" }, "atucQuiet4" : { "nodetype" : "namednumber", "number" : "12" }, "atucReverb1" : { "nodetype" : "namednumber", "number" : "13" }, "atucTref1" : { "nodetype" : "namednumber", "number" : "14" }, "atucReverb2" : { "nodetype" : "namednumber", "number" : "15" }, "atucEct" : { "nodetype" : "namednumber", "number" : "16" }, "atucReverb3" : { "nodetype" : "namednumber", "number" : "17" }, "atucTref2" : { "nodetype" : "namednumber", "number" : "18" }, "atucReverb4" : { "nodetype" : "namednumber", "number" : "19" }, "atucSegue1" : { "nodetype" : "namednumber", "number" : "20" }, "atucMsg1" : { "nodetype" : "namednumber", "number" : "21" }, "atucReverb5" : { "nodetype" : "namednumber", "number" : "22" }, "atucSegue2" : { "nodetype" : "namednumber", "number" : "23" }, "atucMedley" : { "nodetype" : "namednumber", "number" : "24" }, "atucExchmarker" : { "nodetype" : "namednumber", "number" : "25" }, "atucMsg2" : { "nodetype" : "namednumber", "number" : "26" }, "atucReverb6" : { "nodetype" : "namednumber", "number" : "27" }, "atucSegue3" : { "nodetype" : "namednumber", "number" : "28" }, "atucParams" : { "nodetype" : "namednumber", "number" : "29" }, "atucReverb7" : { "nodetype" : "namednumber", "number" : "30" }, "atucSegue4" : { "nodetype" : "namednumber", "number" : "31" }, "atucShowtime" : { "nodetype" : "namednumber", "number" : "32" }, "aturG9941" : { "nodetype" : "namednumber", "number" : "100" }, "aturQuiet1" : { "nodetype" : "namednumber", "number" : "101" }, "aturComb1" : { "nodetype" : "namednumber", "number" : "102" }, "aturQuiet2" : { "nodetype" : "namednumber", "number" : "103" }, "aturComb2" : { "nodetype" : "namednumber", "number" : "104" }, "aturIcomb1" : { "nodetype" : "namednumber", "number" : "105" }, "aturLineprob" : { "nodetype" : "namednumber", "number" : "106" }, "aturQuiet3" : { "nodetype" : "namednumber", "number" : "107" }, "aturComb3" : { "nodetype" : "namednumber", "number" : "108" }, "aturIcomb2" : { "nodetype" : "namednumber", "number" : "109" }, "aturMsgfmt" : { "nodetype" : "namednumber", "number" : "110" }, "aturMsgpcb" : { "nodetype" : "namednumber", "number" : "111" }, "aturReverb1" : { "nodetype" : "namednumber", "number" : "112" }, "aturQuiet4" : { "nodetype" : "namednumber", "number" : "113" }, "aturReverb2" : { "nodetype" : "namednumber", "number" : "114" }, "aturQuiet5" : { "nodetype" : "namednumber", "number" : "115" }, "aturReverb3" : { "nodetype" : "namednumber", "number" : "116" }, "aturEct" : { "nodetype" : "namednumber", "number" : "117" }, "aturReverb4" : { "nodetype" : "namednumber", "number" : "118" }, "aturSegue1" : { "nodetype" : "namednumber", "number" : "119" }, "aturReverb5" : { "nodetype" : "namednumber", "number" : "120" }, "aturSegue2" : { "nodetype" : "namednumber", "number" : "121" }, "aturMsg1" : { "nodetype" : "namednumber", "number" : "122" }, "aturMedley" : { "nodetype" : "namednumber", "number" : "123" }, "aturExchmarker" : { "nodetype" : "namednumber", "number" : "124" }, "aturMsg2" : { "nodetype" : "namednumber", "number" : "125" }, "aturReverb6" : { "nodetype" : "namednumber", "number" : "126" }, "aturSegue3" : { "nodetype" : "namednumber", "number" : "127" }, "aturParams" : { "nodetype" : "namednumber", "number" : "128" }, "aturReverb7" : { "nodetype" : "namednumber", "number" : "129" }, "aturSegue4" : { "nodetype" : "namednumber", "number" : "130" }, "aturShowtime" : { "nodetype" : "namednumber", "number" : "131" }, "description" : """This parameter represents the last successfully transmitted initialization state in the last full initialization performed on the line. States are per the specific xDSL technology and are numbered from 0 (if G.994.1 is used) or 1 (if G.994.1 is not used) up to Showtime.""", }, "Adsl2LineStatus" : { "basetype" : "Bits", "status" : "current", "noDefect" : { "nodetype" : "namednumber", "number" : "0" }, "lossOfFrame" : { "nodetype" : "namednumber", "number" : "1" }, "lossOfSignal" : { "nodetype" : "namednumber", "number" : "2" }, "lossOfPower" : { "nodetype" : "namednumber", "number" : "3" }, "initFailure" : { "nodetype" : "namednumber", "number" : "4" }, "description" : """Attributes with this syntax are status parameters that reflect the failure status for a given endpoint of ADSL/ADSL2 or ADSL2+ link. This BITS structure can report the following failures: noDefect(0) - This bit position positively reports that no defect or failure exists. lossOfFrame(1) - Loss of frame synchronization. lossOfSignal(2) - Loss of signal. lossOfPower(3) - Loss of power. Usually this failure may be reported for ATU-Rs only. initFailure(4) - Recent initialization process failed. Never active on ATU-R.""", }, "Adsl2ChAtmStatus" : { "basetype" : "Bits", "status" : "current", "noDefect" : { "nodetype" : "namednumber", "number" : "0" }, "noCellDelineation" : { "nodetype" : "namednumber", "number" : "1" }, "lossOfCellDelineation" : { "nodetype" : "namednumber", "number" : "2" }, "description" : """Attributes with this syntax are status parameters that reflect the failure status for Transmission Convergence (TC) layer of a given ATM interface (data path over an ADSL/ADSL2 or ADSL2+ link). This BITS structure can report the following failures: noDefect(0) - This bit position positively reports that no defect or failure exists. noCellDelineation(1) - The link was successfully initialized, but cell delineation was never acquired on the associated ATM data path. lossOfCellDelineation(2) - Loss of cell delineation on the associated ATM data path.""", }, "Adsl2ChPtmStatus" : { "basetype" : "Bits", "status" : "current", "noDefect" : { "nodetype" : "namednumber", "number" : "0" }, "outOfSync" : { "nodetype" : "namednumber", "number" : "1" }, "description" : """Attributes with this syntax are status parameters that reflect the failure status for a given PTM interface (packet data path over an ADSL/ADSL2 or ADSL2+ link). This BITS structure can report the following failures: noDefect(0) - This bit position positively reports that no defect or failure exists. outOfSync(1) - Out of synchronization.""", }, }, # typedefs "nodes" : { "adsl2TCMIB" : { "nodetype" : "node", "moduleName" : "ADSL2-LINE-TC-MIB", "oid" : "1.3.6.1.2.1.10.238.2", "status" : "current", }, # node }, # nodes }